Lightolier GM4B5SVI432 User manual

GYMLYTE GM4B5SVI432
Page 1 of 2 SURFACE FLUORESCENT, 4' LENGTH, 16-5/16" WIDE WITH STEEL WIRE DOOR
3 OR 4 LAMP T8 OR T12
DIMENSIONS
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 6A/Folio P30-11
Features
• Excellent for gymnasiums and similar applications.
• Welded 20 gauge chassis for superior strength.
• Side mounted ballast for a low 4-1/8" deep profile.
• Wire guard welded to door frame.
• Door frame, hinged.
• Door, latch with screws.
• Steel wire guard to protect lens.
• Surface or stem mounted.
4-1/8"
(105mm)
13-3/8" (340mm)
16-15/16" (430mm)
24-3/32" (612mm)
7/8" DIa. K.O.
8 Places
3" (76mm)
5"
(127mm)
5"
(127mm) 3" (76mm)
3-1/16"
(78mm)
Double K.O.
2" Dia./7/8" Dia.
48-3/16" (1224mm)
4' FIXTURE

GYMLYTE GM4B5SVI432
Page 2 of 2 SURFACE FLUORESCENT, 4' LENGTH, 16-5/16" WIDE WITH STEEL WIRE DOOR
3 OR 4 LAMP T8 OR T12
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 6A/Folio P30-11
Job Information Type:
OPTIONS & ACCESSORIES
SPECIAL LENSES: Substitute KA for VI (standard.)
FUSING: Internal fast-blow fusing.
SUFFIX: GLR.
Internal slow-blow fusing.
SUFFIX: GMF.
RADIO INTERFERENCE FILTER 120 or 277 volt, 50 or 60 Hz. One per fixture
is standard. SUFFIX: RF.
STEM AND CANOPY SETS: Suspends fixture 6", 12", 18" or 24" from surface.
(Four per fixture is recommended.) Catalog Number: ASC6 CSP (6"), ASC12
CSP (12"), ASC18 CSP (18"), ASC24 CSP (24")
ELECTRICAL/WIRING OPTIONS Consult factory.
SPECIFICATIONS
PERFORMANCE: In an installation of 4 lamp 32W luminaires in a room cavity
ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be
less than .73.
SPECIFICATIONS (continued)
MATERIALS: Chassis parts are die formed 20 gauge cold rolled steel, weld-
ed for rigidity with all seams finished smooth.
FINISH: Chassis exterior—white baked polyester powdercoat finish
Cavity—white baked polyester powdercoat, minimum reflectance 84%. LENS:
VI (standard). Pattern 12, .125" nominal thickness, extruded virgin acrylic lens
(average weight per square foot is 6.8 ounces). KA (optional) Extruded acrylic,
square based male conical prism, .156" overall thickness (similar to pattern 19).
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB.
If K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W./UL and C-UL.
ORDERING INFORMATION
Explanation of Catalog Number. Example: GM4B5SVI432120SOGLR
GM
GYMLYTE
HEAVY DUTY
SURFACE
LUMINAIRE
4
FIXTURE
LENGTH:
4=4' Length
B
BODY STYLE:
B=Surface
5
FIXTURE
WIDTH:
5=16-15/16"
S
CEILING
TYPE:
S=Surface
LENS/
SHIELDING TYPE:
VI=Pattern 12 lens .125"
polycarbonate
(standard)
KA=Pattern 19 lens .156"
nominal Prismatic lens
LAMP
QUANTITY:
3=3 Lamp
4=4 Lamp
LAMP TYPE/
FIXTURE LENGTH:
32=T8
34=T12
(Nominal 48")
VOLTAGE:
120 or 277
BALLAST TYPE:
1 & 2 Lamp Mag. T12 LE
<20THD <10THD
1 & 2 Lamp Elec. T8 SO* HI*
1-3 Lamp Elec. T8 O3* H3*
1-4 Lamp Elec. T8 O4* H4*
LOL T8 Dimming PS –
*Instant Start Standard
OPTIONS:
Add appropriate
suffix to catalog
no, ie: (GLR)
PHOTOMETRY MODEL NO. GM4B5SVI432120SO
coefficients of utilization — zonal cavity method (effective floor cavity reflectance 0.20)
RF 20 20 20
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
1767371 696765 666563
2706662 625956 605755
3655854 565248 545048
4605347 504642 484542
5554741 454036 433936
6514237 403632 393532
7473832 363128 353128
8433429 332824 322724
9403125 292521 292421
10 37 28 22 27 22 19 26 22 19
room cavity ratio
LER = FL - 69 IW - 62 BF - 0.88
Comparative yearly lighting energy cost per 1000 lumens = $3.47