Lightolier MJ6 Series User manual

MJ6 Series
CHICAGO LED STEEL EXIT
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Exit face
illumination is provided
by a special high intensity
indirect white LED lighting
strips. Letter brightness and
illumination uniformity exceed
UL requirements. MJ6E-DEH
combination models with
side mounted lamp heads
are provided with 6 V, 12 W
halogen bi-pin lamps.
Housing: MJ6 Series exits
are constructed of heavy-duty
steel finished in white baked-
on powder paint providing
scratch and corrosion
resistance. Exit face features
6” letters with 3/4” stroke on
translucent glass panels and full
length directional arrows to
meet City of Chicago visibility
requirements. Mounting
canopy is standard.
Battery: Maintenance-free,
sealed, lead calcium battery
has an estimated service life
of 5 years, and an operating
temperature range of
65°F (19°C) to 85°F (30°C).
120 minutes of emergency
illumination.
Electronics: 120/277 VAC
dual voltage input with surge-
protected, solid-state circuitry.
Fully automatic, temperature
compensating, variable rate
float charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Input Power Requirements:
AC Only:
9.6 W (120 VAC)
9.2 W (277 VAC)
Emergency Operation:
10.6 W (120 VAC)
10.2 W (277 VAC)
Code Compliance
All models are UL listed and
meet NFPA 101 Life Safety
Code, NEC, OSHA and City
of Chicago codes. Emergency
models are UL 924 listed.
Warranty
Three year unit warranty
(excludes lamps). Three year
full plus seven year prorated
battery warranty.
MJ6E1RW12DEH
9.5"
(24.1 cm)
26.25"
(66.7 cm)
14.5"
(36.8 cm)
12.75"
(32.4 cm)
Combination Model
Standard Model
9.5"
(24.1 cm)
14.5"
(36.8 cm)
12.75"
(32.4 cm)

MJ6 Series
CHICAGO LED STEEL EXIT
Page 2 of 2
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
MJ6 Series July 27, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2012.All rights reserved.
Job Information Type:
Ordering Information
Series
MJ6 = Chicago
Exit
MJ6
1= Single Face
2= Double Face
# of Faces
A= AC Only Exit
E= Emergency
Operation Exit
Mode of Operation
Single Face Models
3= EXIT (No Arrow)
6= EXIT (Right Arrow)
9= EXIT (Left Arrow)
12 = EXIT (Double Arrow)
2= STAIRS (No Arrow)
5= STAIRS (Right Arrow)
8= STAIRS (Left Arrow)
11 = STAIRS (Double Arrow)
Double Face Models
18 = EXIT (No Arrow)
21 = EXIT (Right or Left Arrow)
24 = EXIT (Double Arrow)
17 = STAIRS (No Arrow)
20 = STAIRS (Right or Left Arrow)
23 = STAIRS (Double Arrow)
Exit Face Designator
DEH = Combination Model w/ Side Mounted Par 36
12 W Halogen Heads
SW = Special Wording (consult factory)
SX = Self-Diagnostic Circuit (emergency models only)
IA = Audible Intermittent Alarm (emergency models only)
IV = Visual Intermittent Alarm (emergency models only)
FA = Fire Alarm Panel Interface
Factory Installed Options
RW = Red
on White
Letter Color
RW
Accessories (order as a separate item)
MJSKW = 18” Stem Mounting Kit (white)
MJSKB = 18” Stem Mounting Kit (black)
MJPG9 = Wire Guard - Wall Mount (AC and emergency models)
MJPG10 = Wire Guard - Wall Mount (combination models)