Lightolier QVS2GPFLV317 User manual

Mounting Methods / Features Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L10-40
Features
• Efficiency 55.4%.
• Flat blade louver with lens overlay and perforated curved side blades.
• Seamless welded form: curved top and side reflectors are formed
together without any gaps or visual barriers.
• No visible welding, screws, latches, springs, hooks, rivets or plastic
supports.
• 95% reflective Alter soft white paint finish.
• 5-1/2” deep, one-piece body for easy installation.
• Choice of white microperforated blade, white solid blade or grey
solid blade.
• Easy access to ballast through lamp compartment.
• Fits standard T-grid, exposed slot T-grid ceilings and drywall ceilings.
• Fully recessed luminaire and lamp compartment.
• Optional hold-down clips.
• Luminaire can be row mounted.
ALTER LOUVER QVS2GPFLV317
Page 1 of 2 2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT, 3 LAMP, T8, 5 1/2” DEEP
MICROPERFORATED MESH WHITE LAMP SHIELD/WHITE, MESH LOUVER
Ceiling compatibility
Suite to standard T-grid ceilings Suite to standard exposed slot
T-grid ceilings
11-7/8"
(302mm)
(605mm)
23-13/16"
ACCESS
PLATE (2)
7/8" K.O.'S
23-13/16"
(605mm)
23-13/16"(605mm)
(140mm)
5-1/2"
Microperforated mesh
white lamp shields
grey solid louver
Microperforated mesh
white lamp shields
white mesh louver
Microperforated mesh
white lamp shields
white solid louver

Specifications
MATERIALS: One piece chassis constructed from die formed 20 gauge cold
rolled steel. Reflectors - 95% reflectance baked white acrylic matte paint
finish. Soft white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish. Louver - flat blade louver with soft white acrylic
overlay.
ELECTRICAL: Rapid start HPF, thermally protected class “P”ballast. If K.Os are
within 3”of ballast use wire suitable for at least 90C.
LABELS: Listed by
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: [phone] •Fax [phone]
631 Airport Road, Fall River, MA 02720 •[phone] •Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L10-40
Job Information Type:
ALTER LOUVER QVS2GPFLV317
Page 2 of 2 2’X 2’RECESSED DIRECT/INDIRECT FLUORESCENT, 3 LAMP, T8, 5 1/2”DEEP
MICROPERFORATED MESH WHITE LAMP SHIELD/WHITE, MESH LOUVER
Photometry
Ordering Information Explanation of Catalog Number Example: QVS2GPFLV317120O3
FAMILY
QVS: Quality Visual
Louver
LUMINAIRE
WIDTH:
24”
CEILING TYPE:
G= Grid
LAMP SHIELD:
PF = Microperforated mesh
LAMP
QUANTITY
3
LAMP
17 = 17W (T8 nominal 24’)
VOLTAGE:
120V
277V
347V
BALLAST:
OC = Magnetic T8
SO = 1 or 2 LPB electronic T8 IS
SR = 1 or 2 LPB electronic T8 RS
O3 = 3 LPB electronic T8 IS
R3 = 3 LPB electronic T8 RS
PS = PowerSpec HDF Dimming Electronic T8
OPTIONS:
F= Internal Fusing (consult
factory)
N= Emergency lighting
System (for U.S.)
O= Emergency Lighting
System (for Canada)
R= Radio Interference Filter
QVS 2 G PF 317
SHIELD DETAILING
LG = Grey solid flat blade louver
LV = White perforated flat blade louver
LW = White solid flat blade louver
LPB : Number of lamps per ballast