Lightolier Lytecaster 2006 User manual

Lytecaster®Recessed Downlighting 2006
Page 1 of 2 3 3/4” Aperture MR16 Slot Reflector Trim .
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011 Philips Group • H0811
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier is a Philips group brand
Features
1. Reflector: Hydroformed aluminum, .040” thick (18 ga.); matte white trim
flange.
2. Slot Aperture: Die-formed aluminum, .040” thick (18 ga.). Aperture plate and
inner shield, matte black inside, matte white finish outside. Cuts off glare at
normal viewing angles.
3. Frame-In Kit: (2000LV standard frame shown.) Other frames shown on the
right. See Frame-In Kit specification sheets for more details.
Options & Accessories
Retaining Clips: 1955 - For Installing in Existing Ceiling
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Reflector Trim Frame-In Kit — See Individual Frame-In Kit Specification Sheets
Low Voltage
Frame-In Kit Installation Type Lamping Height
2006 Matte White 2000LV Standard Non-IC 5 3/8"
2000LVR Remodeler Non-IC 5 3/8"
2000LVRE1 Remodeler Non-IC 5 3/8"
2000LVE1 Electronic Low Voltage Non-IC 120V 20W-50W MR16 5 3/8"
2000LVE2 Electronic Low Voltage Non-IC 277V 5 3/8"
2004ICV/N Lytening AirSeal® IC 20W-37W MR16 7 1/4"
2000LVNT Low Voltage Remote Transformer 20W-42W MR16 5 3/8"
2000AICV AirSeal® IC 20W-35W MR16 7 5/16"
2006/2000LV Series
Standard MR16
2006/2000LVR
Remodeler/Non-IC
2006/2000LVNT
Remote Transformer
Low Voltage
2006/2004ICV/N
0™AirSeal® Insulated Ceiling
7 1/4”
5 3/8”
5 3/8”
5 3/8”
Labels
UL (Suitable for Damp Locations), I.B.E.W

Job Information Type:
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011 Philips Group • H0811
Lytecaster®Recessed Downlighting 2006
Page 2 of 2 3 3/4” Aperture MR16 Slot Reflector Trim .
Lightolier is a Philips group brand
To convert lighting data for a lower wattage lamp of the same type, multiply footcandles
(or candlepower) values by the ration of the lumens of the two lamps. The coefficients of
utilization remain the same.