Linak LA12 Instruction manual

Actuator LA12
Reed - relative positioning 4 wires
Connection diagram
LINAK.COM/TECHLINE

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2019.05 . MA-M9-02-581-A .LINAK A/S reserves the right to make technical alterations
Connection diagram
7
2019 © LINAK A/S
Reed - Relative positioning 4 wires
12XXXX-XXXXXXX4
RED
BLUE
WHITE
BLACK
REED OUTPUT
Please be aware that if the power supply is not properly connected, you might damage
the actuator!

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2019.05 . MA-M9-02-581-A .LINAK A/S reserves the right to make technical alterations
I/O Specifications
7
2019 © LINAK A/S
Reed - Relative positioning 4 wires
Input/Output Specification Comments
Description The actuator can be equipped with a Reed
sensor and a spindle magnet that give a rela-
tive positioning feedback signal when the
actuator moves. The output signal is a PNP
signal.
Red 12 or 24 VDC (+/-)
12V ± 20%
24V ±10%
Under normal conditions:
12V, max. 5A depending on load
24V, max. 2.5A depending on load
To extend actuator:
Connect Red to positive
To retract actuator:
Connect Red to negative
Blue To extend actuator:
Connect Blue to negative
To retract actuator:
Connect Blue to positive
Black Reed output: same as input voltage
4 pole magnet (Option M)
2mm pitch = 0.5mm per pulse
4mm pitch = 1.0mm per pulse
6mm pitch = 1.5mm per pulse
10 pole magnet (Option E)
2mm pitch = 0.2mm per pulse
4mm pitch = 0.4mm per pulse
6mm pitch = 0.6mm per pulse
Max. switching capacity
750mA
White Signal power supply (+) 12-24VDC

FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS
Copyright © LINAK 2019.05 . MA-M9-02-581-A .LINAK A/S reserves the right to make technical alterations
Terms of use
The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing
accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and
changes without prior notice.Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability
of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed
in its catalogues or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.