LINDR SODA EXCLUSIVE GREEN LINE User manual

SODA WATER MAKERS
LINDR
Number 011-2020 REV00 Valid 2020-06-01
INSTRUCTION MANUAL
ENGLISH
soda exclusive GREEN LINE

2
IMPORTANT
This manual contains instructions for installation, use and operation of the ap-
pliance. This manual is an integral part of the device. It must be stored in the
vicinity of the device for the entirety of its service life and must be made avail-
able to the user any time the device is installed, moved, used or maintained.
Read this manual carefully before installing and using the device. It contains
important information for its correct and safe use.
WARNING:
Not following instructions may cause injury or
damage the device.
SYMBOLS AND MARKINGS USED IN THE MANUAL:
DANGER:
Risk of injury by electrical current.
NOTE:
This symbol indicates information and recom-
mendations for the user.
WARNING:
The cooling system contains ammable coolant
R290 (propane)!
LINDR.CZ s.r.o.
Sadová 132
503 15 Nechanice, Czech Republic
mobile: + 420 775 715 494
tel. : [phone]
e-mail: [e-mail]
web: www.lindr.cz,www.lindr.eu
is manual is a translation of the original Czech manual.

SODA WATER MAKERS
3
Contents:
1. Introduction
2. Description of the cooler
3. Machine plate
4. General instructions, measures and safety instructions
5. Installation and placement
6. Electrical connection
7. Testing
8. Warranty
9. Description of the cooler
10. Inlet and outlet marking
11. How to work with speed ttings
12. Putting into operation
13. Connecting SODA EXCLUSIVE
14. Recommended accessories
15. Cleaning the condenser
16. Table of malfunctions
17. Spare parts
18. Technical data
19. Inspection before every use
20. Periodic checks
21. Maintenance
22. Environmental protection
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
..................................
4
4
4
4
5
6
6
6
6
8
9
9
10
11
11
12
13
13
14
14
14
14

4
1. INTRODUCTION:
Thank you for purchasing this LINDR product.
2. DEVICE DESCRIPTION
Soda Water Maker
SODA EXCLUSIVE GREEN LINE is a profession-
al device designed for producing cooled soda
water by mixing H2O and CO2. This
practical device with unique design can be
used in households, oces, restaurants, pro-
duction facilities and more. The soda water
maker is tted with high-quality buttons for
easy control. Its exclusive look is highlighted
by a backlit front panel.
3. MACHINE PLATE
4. GENERAL INSTRUCTIONS, MEASURES
AND SAFETY INSTRUCTIONS
When using the device, follow basic safety
instructions stated by the manufacturer. The
cooling device is designed for ow cooling
of beverages dispensed from kegs. Any other
use is considered impermissible and therefore
dangerous. The supplier is not liable for dam-
age caused by incorrect use.
DO NOT USE THE DEVICE FOR PURPOSES
OTHER THAN THOSE STATED BY THE MANU-
FACTURER!
General safety principles. Observe the follow-
ing safety instructions.
The supplier is not liable for damage caused
by activities carried out on this device without
observing the following instructions!
WARNING: Children aged 15 or more and
persons with reduced physical, sensory or
mental capabilities or insucient experience
and knowledge may only use the device when
supervised or instructed in safe use of the ap-
pliance and familiarised with potential dan-
gers.
WARNING: Children must not be allowed
to play with the appliance. Store all packaging
material out of reach of children (comes with a
plastic bag – suocation hazard).
WARNING: Cleaning and maintenance of
the appliance on the part of the user must not
be done by unsupervised children.
WARNING: Before connecting to main elec-
trical supply, check that the voltage and fre-
quency in the mains corresponds to the data
stated on the device.
WARNING: Always make sure that the sock-
et you intend to plug the cooler into meets the
specications on the machine plate (voltage,
frequency, input power).
WARNING: Before any interference with the
device, such as cleaning or maintenance, AL-
WAYS disconnect the device from power sup-
ply.

SODA WATER MAKERS
5
WARNING: Never place tools or other ob-
ject into the fan.
WARNING: Never touch electrical compo-
nents with wet or damp hands.
WARNING: To ensure the cooling unit
works properly and at full capacity, make sure
air supply to the unit is not obstructed.
WARNING: Water temperature during sani-
tation must not be higher than 25 °C!
WARNING: Always make sure the power
socket you intend to plug the cooler into is ac-
cessible, so that the appliance can be immedi-
ately unplugged in case of emergency.
WARNING: When unplugging the device
from the socket, grab the plug and pull it out.
Do not under any circumstances pull at the ca-
ble; risk of damage.
WARNING: To turn the device o complete-
ly, unplug the appliance from the power sock-
et.
WARNING: In the event the electrical wiring
of the product becomes damaged, summon a
trained service technician. Do not under any
circumstances repair the device yourself.
WARNING: The cooling system contains
ammable coolant R290 (propane)!
WARNING: Emergency maintenance and
repair of the cooling system must be done by
trained, authorised technicians familiar with
cooling and electrical systems. The technicians
should have special training and qualication
for handling ammable substances in order to
perform service on coolers containing R290.
Follow basic regulations and safety measures
regarding service and repair!
WARNING: Do not use open ame or po-
tential sources of sparks in the vicinity of a
cooler using R290 coolant!
WARNING: After unpacking, place the cool-
er so that heat created by the cooling unit can
be vented suciently.
WARNING: Do not place objects that could
prevent air circulation on top of the cooler.
5. INSTALLATION AND PLACEMENT
Place the cooler onto a stable, level surface
(maximum permitted inclination: 2 degrees).
The appliance requires unobstructed air circu-
lation.
• Ensure sucient free space for air circulation
and heat dissipation.
• Ensure sucient supply of fresh air.
• The device must not be placed in an enclosed
space.
• The device must not be placed in the vicinity
of heat sources or exposed to direct sunlight.
Minimum distance of vents from an obstacle
that would limit air circulation must be 30 cm.
Minimum distance for sections with no air
vents is 7 cm. Ideally, use the device in a cool
and well ventilated room. The device is de-
signed for use at ambient temperature of at
least 16 °C and at most 32°C.
WARNING: The device MUST NOT be used
or stored at ambient temperatures lower
than 0°C. The device is designed for use in a
normal environment, under a roof, protected
from rain and sunlight. Climate class N.
DANGER: Protect the cooler and electrical
connection from rain and spraying water!
WARNING: Do not under any circumstanc-
es lay the cooler on its side, not even during
transport.
NOTE: In order for the device to work
correctly and at maximum output, it is im-
portant to not cover up any of the device's
vents and ensure sucient air circulation.

6
6. ELECTRICAL CONNECTION
Connect the device to a power socket in ac-
cordance with specications on the product
label of the device. Electrical wiring is subject
to local regulations. If the power leads (ca-
bles) are damaged, they must be replaced by
the manufacturer, their service technician or
a similarly qualied person to prevent risk of
hazardous situations.
DANGER: Do not use or turn on the device
if the power lead (cable) is damaged!
7. TESTING
The product is delivered ready for immediate
use.
8. WARRANTY
The device comes with a warranty in accord-
ance with general legal regulations of the
Czech Republic or in accordance with the
trade agreement. During the validity period
of the warranty, we will remove any defects on
the product free of charge, provided these de-
fects were not caused by excess wear, improp-
er handling, incorrect storage or by using the
product in a way that is counter to the instruc-
tion manual or the product's design as dened
by the manufacturer. Materials replaced dur-
ing the validity period of the warranty are our
property. The legitimacy of the warranty claim
is always decided by an authorised service
centre. Warranty provided by a retailer outside
of the territory of the Czech Republic is gov-
erned by the agreement between the retail-
er and the buyer in their mutual relationship;
this agreement is not directly linked to the
manufacturer. The agreement does not give
the buyer the right to submit warranty claims
to the manufacturer. Transport expenses or
other costs are not covered by the warranty.
ATTENTION:
Electrical devices and appliances must be
checked/inspected at a time stipulated by
valid legislation of the country the device
is operated in. Inspection of wiring may
only be done by a person with valid au-
thorisation for this activity. Service work,
provision of spare parts and inspection is
done by the manufacturer or an author-
ised service centre.
9. DEVICE DESCRIPTION
1. Drip tray 7. Condenser
2. LED panel 8. Light switch
3. Beverage outow tube 9. Water inlet
4. Water button 10. CO2inlet
5. Soda button 11. Main switch
6. Power cable

SODA WATER MAKERS
7
gure 7 A
gure 7 B

8
10. INLET AND OUTLET MARKING
gure 8 a
gure 8 b
Max. water temperature 25 ° C.

SODA WATER MAKERS
9
12. PUTTING INTO OPERATION
1. Connect the device to CO2supply.
2. Connect the device to water supply.
3. Check that all the joints and connections are suciently tight.
4. Connect the device to the power mains.
5. Turn on the device using the main switch.
6. Use the Soda or Water button to pour a drink.
WARNING: If you discover a leak, turn o the device. Fix any leaks found on the tubing. If
a leak is found inside the device or you are unsure how to proceed, contact a service centre.
11. HOW TO WORK WITH SPEED FITTINGS:
11.1 Speed Fittings Installation
Grasp the rapid coupling and insert the hose
all the way inside the speed tting body (ca. 20
mm). The end of the hose must be straight so
that it plugs fully into the coupling. If the hose
will not go in, moisten the end of the hose.
Hold the grey ring tight against the body of
the rapid coupling and pull out the hose.
11.2 Speed Fittings Removal
WARNING: If you do not hold the grey ring but pull at the hose, the speed tting will cut
even deeper into the hose.
WARNING: Hoses must not be pressurised during removal.
gure 9 a
gure 9 B

10
13. CONNECTING SODA EXCLUSIVE
gure 10 a

SODA WATER MAKERS
11
15. CLEANING THE CONDENSER
The condenser must be cleaned with compressed air 1x a month. Alternatively, clean from the
outside with a brush.
gure 11 A
14. RECOMMENDED ACCESSORIES
• AquaStop
• Water lter – VH3-JG 3/8“ head
• Water lter – AP3- C 765 S cartridge
NOTE: The recommended accessories are not included with Soda Exclusive Green Line. The
supplier is not liable for damages caused by not using this recommended accessory.

12
NOTE: If the defect persists even after the above steps are taken, contact a service centre.
16. TABLE OF MALFUNCTIONS
Malfunction Cause Removal
e device is too noisy. e device is in con-
tact with a foreign
object.
Move the object that is touching the device so
that it is not in contact with the cooler.
e device does not
work.
Power cable is not
plugged in.
e main switch is o.
Plug in the power cable. Check that the power
cable is undamaged.
Turn on the main switch.
e device is turned on
but does not cool.
e air vents are ob-
structed.
Make sure the air vents are unobstructed.
Rapid couplings are
leaking.
Hose poorly inserted.
Scratches on the hose.
Unplug the hose from the rapid coupling
and check that it does not have a sharp edge.
Shorten the hose with a knife if necessary.

SODA WATER MAKERS
13
18. TECHNICAL DATA
Name SODA Exclusive Green Line
Power (Hp) 1/8
Power (W) 310
Maximum output (l/hour) 25
Continuous out-
put (l/hour) 20
Temperature dif-
ference Δt (°C) 10
Coolant type R290
Voltage (V/ Hz~1) 220 – 240 V 50Hz~1
Input power (W) (W) 391
Current (A) (A) 1,7
Frame dimensions (WxDxH mm) 265x370x390
Net weight (kg) 23
Do not forget to specify the following:
• type of defect
• product type
• production year
• product's serial number (found on the label)
Ordering Components
ALWAYS USE ORIGINAL COMPONENTS. The manufacturer or supplier bear no
responsibility for non-original components or components not recommended
by the manufacturer.
17. SPARE PARTS
When ordering spare parts, always provide the following:
• product type
• production year
• product's serial number
• full name of the spare part and its number

14
19. INSPECTION BEFORE EVERY USE
1. Visual check.
2. Lead-in cable check.
3. Condenser cleanliness check (in case of excess pollution of the condenser, clean more fre-
quently than 1x a month).
WARNING: Do not use the device if defects or malfunctions are found.
20. PERIODIC CHECKS
1x a week: check that the lead-in cable is
undamaged and that the plug is rmly in the
socket.
1x a week: check that the device is not ex-
posed to radiant heat.
1x a week: check that air circulation is not
obstructed.
1x a month: check the cooling unit's con-
denser and clean it regularly.
1x a year: have an engineering inspector
check the electrical safety of the device.
21. MAINTENANCE
The condenser must be checked for cleanliness every month. Any dirt found must be cleaned with
compressed air or wiped o. Otherwise, there is a risk of reduced cooling output or damaging of
the cooler.
Wipe the device only with a soft and, if needed, lightly moistened cloth.
22. ENVIRONMENTAL PROTECTION
Waste Sorting
This product must not be disposed of in communal waste. Electrical waste in the Czech
Republic is disposed of within the Rema System (www.remasystem.cz).
In countries other than the Czech Republic, waste sorting is subject to local regulations.
Sorted waste enables recycling and reusing used products and packaging materials. Re-
use of recycled material helps protect the environment from pollution and reduces re-
source consumption. Local regulations may regulate the method of disposing household
appliances at local collection points or at the point of sale.

SODA WATER MAKERS
15