Logitech G733 Installation guide

FAQ Stub - G733
Frequently Asked Questions
•+Nvidia Broadcast in Logitech G HUB
NVIDIA Broadcast technology uses AI and the power of the RTX architecture to enable unique
audio processing capabilities for Logitech devices. Logitech and NVIDIA have partnered to
create the first fully integrated solution using NVIDIA Broadcast features directly inside G HUB
audio drivers.
NVIDIA Broadcast based Noise Removal uses AI and GPU acceleration to eliminate unwanted
background noise automatically from a microphone signal. RTX GPU users can enable the
NVIDIA Broadcast beta feature directly within G HUB to clean up their mic signal.
Go live or attend a meeting remotely without worrying about finding a quiet place. Remove loud
keyboard typing, annoying microphone noise, bothersome PC fans and remove room noise from
desktop mics. NVIDIA Broadcast makes it fast and easy.
NVIDIA Broadcast works with all Blue VO!CE enabled products and a beta version will be
available in the latest update of G HUB software. Users can check out the full capabilities of
NVIDIA Noise Removal built right into the audio drivers of compatible products through G
HUB.
Key Features
•One Click Solution: Easily enable NVIDIA Noise Removal beta with a single click on
the Microphone tab of compatible audio products.
•Integrated Into G HUB: Once NVIDIA Broadcast is installed in G HUB, users can
enable it for multiple products easily without installing a separate tool.
•Test Your Mic Signal: Using the microphone test tool built into G HUB to find the right
settings for your scenario
•GPU Based Processing: Utilizing the powerful tensor cores of the RTX architecture,
users can rely on the power of their GPU to process the mic signal and free up CPU
resources for gaming and streaming.

System Requirements
•Windows 10 PC
•NVIDIA GeForce RTX 2060, Quadro RTX 3000, TITAN RTX or higher GPU
•Compatible headset or microphone
•~1GB hard drive space for installation
Device Compatibility
•G733 Gaming Headset
•PRO X Gaming Headset
•PRO X Wireless Gaming Headset
•Blue Yeti X Microphone
•Blue Yeti X World of Warcraft Edition Microphone
•Blue Yeti Microphone
•Blue Yeti Nano Microphone
•+How Do I Pair a Wireless LIGHTSPEED USB Dongle with My Headset?
If your device becomes unpaired or you receive a replacement Wireless LIGHTSPEED USB
Dongle, follow these instructions to pair your device with the USB Wireless Adapter:
1. Plug-in Wireless LIGHTSPEED USB dongle.
2. Insert a pin into the reset port on the USB dongle to initiate pairing mode.
3. Light on the dongle will blink.
4. Turn on the headset.
5. Hold the “Microphone mute” button for 10-15 seconds to initiate pairing mode.
6. The light on the dongle will stop blinking and your headset should show in G HUB