Logitech G435 SE User manual

G435 SE
SETUP GUIDE |GUIDE D’INSTALLATION

ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . 3
FRANÇAIS . . . . . . . . . . . . . . . . . . . . . . . 13
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . .23
PORTUGUÊS . . . . . . . . . . . . . . . . . . . . . . 33

3ENGLISH
CLEANING THE LOGITECH G435 SE
In the event your Logitech G435 SE needs cleaning we have
somerecommendations:
Before You Clean
–Do not wash your ear pads in a washing machine
–Do not dry your ear pads in a tumble dryer
–Don’t put cleaning liquids directly on your ear pads
andheadband.
–Don’t use bleach, acetone/nail polish remover, strong solvents,
or abrasives as it might aect the polyester fabric surface
condition and cause discoloration.
–When using cleaning sprays, spray on the cloth and wipe —
donot spray the product directly.
Wiping and Cleaning Your G435 SE
–To wipe or clean the headset, use regular tap water to lightly
moisten a clean, soft, lint-free cloth and gently wipe down
theheadband and ear pads.
–For heavier stains, you might additionally use asmall amount
of soap on the lightly moisten, clean, softcloth and gently rub
stained areas. Rinsethoroughly the surface by using the same
moisten cloth. Repeat until all traces of soap are gone.
–You can also use fragrance-free disinfecting wipes, fragrance-
free anti-bacterial wet wipes.
–Let it dry at room temperature.
Logitech encourages users to properly sanitize theirproducts
in accordance with guidelines put out by the World Health
Organization and the Centers forDisease Control guidelines.

4ENGLISH
CONNECTING YOUR HEADSET
USINGLIGHTSPEED
Connect to your PC, Mac, PlayStation 5 or 4 with
LIGHTSPEEDWireless Technology
–Insert receiver into the USB port of your device.
–Press the Power button for minimum 1.5 sec.
–The LED turns cyan once connected.
1.5 sec.

5ENGLISH
HOW TO CONNECT YOUR G435 SE
USINGBLUETOOTH
–Press Power+Mute buttons for 3 seconds
orlonger.
–LED will ash blue as it enters pairing mode.
3 sec.
–Look for G435 SE under the bluetooth list
ofyourdevice and connect.
–Note: G435 SE can connect to a single
Bluetoothdevice at a time.

6ENGLISH
5 sec.
5 sec.
–Press the Mute button for 3 seconds or longer.
–Switch to LIGHTSPEED, LED will light cyan
for5seconds.
–Switch to Bluetooth, LED will light blue
for5seconds.
3 sec.
HOW TO SWITCH THE CONNECTION MODE
BETWEEN LIGHTSPEED ANDBLUETOOTH
ON G435 SE

7ENGLISH
Power ON
–Press the Power button for 1.5 seconds
whenthe headset is OFF.
Power OFF
–Press the Power button for 3 seconds
whenthe headset is ON.
Auto Shuto
–G435 SE automatically shuts o after
30minutes of inactivity.
1.5 sec.
HOW TO POWER ON AND OFF
YOURG435 SE
3 sec.

8ENGLISH
MUTE / UNMUTE microphone
–Short press on the Mute button.
Set Max Volume
–Set to 100 dB
–Press Mute button + Volume UP
for3seconds or longer.
–The LED will ash orange 3 times.
–Set to 85 dB
–Press Mute button + Volume DOWN
for3seconds or longer.
–LED will turn solid orange for 5 seconds.
X3
5 sec.
HOW TO TOGGLE MUTE / UNMUTE
ANDMAX VOLUME ON YOUR G435 SE
3 sec.
3 sec.

9ENGLISH
–Single press the Power button,
whenheadset is ON
–LED will show green for 5 seconds,
whichmeans Battery it between 31%
to100%.
CHECK YOUR BATTERY LEVEL
OFYOURG435 SE
–LED will show red for 5 seconds,
whichmeans Battery is between 15%
to30%.
–LED will ash red for 5 seconds,
whichmeans Battery level is <15%.
5 sec.
5 sec.
5 sec.

10 ENGLISH
–Enable Sidetone
–Double press the Mute button and the LED
willash twice in orange.
Sidetone lets you hear your voice while communicating
withother people. It mirrors the experience of talking
onaphoneand allows you to adjust your speaking volume
toaproper level.
SET THE SIDETONE ON YOUR G435 SE
–Disable Sidetone
–Double press the Mute button and the LED
willash once in orange.
X2
X1