Logitech ZONE VIBE WIRELESS User manual

ZONE VIBE WIRELESS
Setup Guide
Guide d'installation

CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . 14
Español . . . . . . . . . . . . . . . . 25
Português . . . . . . . . . . . . . . 36

KNOW YOUR PRODUCT
Front view:
Back view:
Microphone
boom
Music control
button (play/
pause/ next track)
USB-A
adapter
USB-C
receiver
UC version -
Call button (answer/
end/ reject calls)
MSFT Teams version -
Teams/Call button
Volume up/ down
3English

Bottom view:
3-position switch (power/
Bluetooth®pairing)
Mute button
USB-C port
LED light
4English

USB-C USB-C USB-AUSB-C
BOX CONTENT
1. Zone Vibe Wireless headphones
2. Charging cable
3. USB-C receiver
4. USB-A adapter
5. Travel bag
6. User documentation
POWER ON/OFF
1. Slide the switch in the arrow’s direction to
the middle to power on the headphones. 1
2
2. Once powered on, the LED light will slightly
turn white.
3. There will be a voice prompt that tells you
the battery status.
5English

CONNECT YOUR HEADPHONES
a. Connect via USB-C receiver
1. Insert the receiver into the computer USB-C
port. Or insert the USB-C receiver with the
USB-A adapter to the USB-A port.
2. Zone Vibe Wireless is already paired to the
receiver it ships with.
3. Once successfully paired, the LED light on
the receiver will turn solid white then dim.
b. Connect via BLUETOOTH®
1. Slide the switch to the bottom in the arrow’s
direction for 2 seconds to initiate pairing.
2. The LED light will ash white rapidly.
3. Open Bluetooth®settings on your device.
4. Select Logi Zone Vibe Wireless in discoverable
devices.
5. Once successfully paired, the LED light will
turn solid white.
LOGI Zone
Vibe Wireless
2 sec.
USB-C
USB-A
ADJUSTING HEADPHONES
1. Adjust the headphones by sliding earcups
up and down the extended part of the
headband.
2. It may be easier to adjust the headphones
on your head. Slide the earcups up and down
the headband until they sit comfortably on
your ears.
6English

HEADPHONES CONTROLS
Note:
- Teams activities are only functional when Teams is running on an unlocked computer.
- Media control functionality depends on the type of application.
- Call activities are always the rst priority. When two devices are connected, the Bluetooth®connection will be prioritized
over the receiver. When two Bluetooth devices are connected, the last active device will override the other.
UC version:
Usage Button Action
Call controls Answer / End call Call button Short press
Reject call 1.5 sec. press
Music controls Play / Pause Music control button Short press
Track forward Double press
Volume Volume up "+" Short press
Volume down "-"
Connectivity Bluetooth pairing 3-position switch 2 sec. press
MSFT Teams:
Usage Button Action
Call controls
Answer / End call
Call button
Short press
Reject call 1.5 sec. press
Resume call Short press
Transfer active call to other device
Team activities Invoke Teams Call button Short press
Music controls Play / Pause Music control button Short press
Track forward Double press
Volume Volume up "+" Short press
Volume down "-"
Connectivity Bluetooth pairing Power button 2 sec. press
Tip: Music EQ controls available on Logi Tune.
7English

HEADPHONES LIGHT INDICATOR
Note:
- User-triggered behaviors, such as Bluetooth pairing or link lost, will be prioritized then revert back to its previous status
once the behavior is completed.
Category Status Light
White
Power
Power ON Turn solid white and then dim
Battery charging Breathing
Battery fully charged Solid
Connectivity
Bluetooth pairing Fast blinking
Bluetooth / receiver connected Turn solid white and then dim
Link lost Dim white
Calls Active call Solid
Incoming call Slow blinking
Red Calls Mute Solid
Power Low battery (< 10%) Slow blinking
Factory reset Fast blink from red to white for
three times then LED turn o
Voice notications indicate
when the microphone is on/
o mute.
MUTE
There are 2 ways to mute your microphone.
Press the button to mute. Flip up or down the mic
boom to mute or unmute.
L L L
Mute
"Mute on"
"Mute o"
8English

RECEIVER LIGHT INDICATOR
MSFT Teams:
Category Status Light
White Connectivity
Receiver connecting O
Receiver connected
New device paired Turn solid white and then dim
Receiver disconnected O
Purple
Connectivity
Connecting to Teams Breathing
Solid
First time failed connecting
to Teams Fast blinking for 10 seconds and then o
Failed connecting to Teams Fast blinking 3 times then LED o
Calls Active call Solid
Incoming call Repeat "fast blinking 3 times then LED o"
Red Calls Mute Solid
Blue Connectivity New device pairing Fast blinking
Connecting mode
Connected/Paired
Incoming call
Mute on
Pairing mode
Paired
9English

UC version
Category Status Light
White
Connectivity
Receiver connecting O
Receiver connected
New device paired Turn solid white and then dim
Receiver disconnected O
Calls
Active call Solid
Incoming call Repeat "fast blinking 3 times then
LED o"
Red Calls Mute Solid
Blue Connectivity New device pairing Fast blinking
Connecting mode
Connected/Paired
Incoming call
Mute on
Pairing mode
10 English

CHARGING
To conserve battery life, headphones
automatically power o after 30 minutes
without usage.
Sleep timer can be adjusted in Logi Tune.
The LED light on the headphones will blink
slowly in RED when the battery is lower
than 10%.
Charging via USB cable
1. Plug one end of the cable to the USB-C port on
the bottom of the earcup and the other end
into the USB-C charging port on your computer.
2. The LED light will start breathing white when
charging.
3. The LED light will turn solid white when fully
charged.
–2 hours will fully charge the battery.
– 5 minutes will give you 1 hour of playback.
Note:
Battery life may vary based on user, environment, and
computing conditions.
4. The headphones can be used with the receiver
and Bluetooth paired while charging.
LOGI TUNE
Logi Tune helps boost your headphones
performance withperiodic software and
rmware updates.
It is recommended to update both your
headphones and receiver. To do so, download
Logi Tune from www.logitech.com/tune
www.logitech.com/tune
Logi Tune
11 English

ADJUSTING SIDETONE
Sidetone lets you hear your own voice during conversations
so you are aware of how loud youaretalking. In Logi Tune,
select the sidetone feature, andadjust the dial accordingly.
 A higher number means you hear more external sound.
 A lower number means you hear less external sound.
AUTO SLEEP TIMER
By default, your headphones will automatically power o
when not in use for 30 minutes. Adjust the sleep timer in
Logi Tune. To wake up your headphones, try sliding o/on
the power switch again.
RESET YOUR HEADPHONES
1. Power the headphones on.
2. Press and hold the call button and volume ’–’ button
for 5 seconds.
3. The LED light will quickly blink from red to white for
3 times and then turns o when your headphones
are successfully reset.
4. The headphones will turn o after reset.
12 English

Headphones:
Height x Width x Depth: 183.03 x 169.68 x 73 mm
Weight: 0.185 Kg
Earpad:
Height x Width x Depth: 98.6 x 75.44 x 19.3 mm
Receiver:
Height x Width x Depth: 26.8 x 12.4 x 6.2 mm
Adapter:
Height x Width x Depth: 24.5 x 15.4 x 8.7 mm
DIMENSIONS
Works with common calling applications across almost all platforms and
operating systems.
Works with Windows®, Mac, or Chrome™ based computer via USB-C, USB-A,
Bluetooth®and iOS or Android™ Bluetooth®enabled devices.
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATIONS
© 2022 Logitech. Logitech, Logi and the Logitech logo are trademarks or registered trademarks
ofLogitech Europe S.A. and/or its aliates in the U.S. and other countries. Apple and the Apple logo
are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is
aservice mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Logitech is under license. Logitech assumes no responsibility for any errors
that may appear in this manual. Information contained herein is subject to change without notice.
www.logitech.com/support/zonevibewireless
Microphone Type: Dual omni-directional MEMS mics with directional
beamforming and DSP
Frequency response (Speaker): 20-20kHz (music mode), 100-8kHz (talk mode)
Frequency response (Microphone): 100-8kHz
Talk time up to 18 hrs
Listen time up to 20 hrs
Bluetooth version (headset): 5.2
Bluetooth version (receiver): 5.2
Wireless range: Up to 30 m/100 ft (open eld line of sight)
Cable length (USB C to C charging cable): 4.9 ft (1.5 m)