Logitech UE 5000 User manual

Setup Guide
5000
设置指南

UE 5000
3
UE 5000
3
English. . . . . . . . . . . . . . . . . . 4
简体中文 . . . . . . . . . . . . . . . . .11
www.logitech.com/support . . . . 19

UE 5000
4 English
Package contents
1. Headphones
2. Charging cable
3. Documentation
Setup Guide
设置指南
5000
2
1
3

UE 5000
English 5
Know your product
1. Volume up button/Next
2. Blue/red LED
3. Volume down button/Previous
4. Multifunction button
•Power on/o
•Pairing
•Answer call/End call/Reject call
•Play/Pause
5. Micro-USB jack for charging
6. 3.5mm AUX jack
7. Microphone
8. Adjustable headband
9. Foldable design
10. Micro-USB cable (charging cable)
1
2
3
4
8
9
10
5
6
7

UE 5000
6 English
Charging your product
To charge the headphones, plug the
included USB charging cable into your
headphones and computer. When the
headphone battery is very low the LED
will continually flash; a full charge can take
approximately 3 hours. When charging is
finished, the blue LED will light. But you
don’t have to stop using the headphones
because they charge while you talk or listen
to music.
USB

UE 5000
English 7
Set up your product
Power on/o
To switch the device on, press and hold the
multifunction button for about 4 seconds
and then release. To turn the device o,
press and hold the multifunction button
for about 3 seconds and then release.
Connect to a Bluetooth device
USB
1. First time pairing, press and hold
the multifunction button for about
6 seconds until the blue LED light
flashes quickly, indicating that the device
is in “pairing” mode. Search “Logitech
UE 5000” via your Bluetooth enabled
device. If the Bluetooth device requests
a password, enter number “0000”.
2. Second time pairing via Bluetooth, press
and hold the multifunction button for
about 4 seconds until the blue indicator
light is on and flashes slowly which
indicates standby mode, and then
headset could connect to the device
automatically (its Bluetooth function
should be turned on). If the Bluetooth
device requests a password, enter
number “0000”.
3. When pairing with a second device,
ensure the first device with “Not
Connected” state. Then follow the first
time pairing process as described above.

UE 5000
8 English
1
4 , 5 & 6
2
3
Product features
Listening to music
1. To adjust the volume, single press the
volume up or down button to adjust
volume to your favorite during a call or
while listening to music.
2. To control next or previous, hold press
the volume up or down button to have
“Forward or backward track” function.
3. Optionally to listen to music from
wired audio source,turn UE 5000 o
and connect 3.5mm stereo sourcing
cable (not included in package) from
AUX jack to music player such as MP3,
PC, etc. Then play the music player,
and can adjust the volume or track
on player only.
Answering a call
4. To answer a call, press the multifunction
button.
5. To reject a call, press and hold the
multifunction button for about 1 second.
6. To hang up a call, press the multifunction
button.

UE 5000
English 9
Button function (Bluetooth source)
Function Button Operation
Turn on Multifunction button Press and hold
(approximately 4s)
Pair Multifunction button Press and hold
(approximately 6s)
Turn o Multifunction button Press and hold
(approximately 3s)
Answer call Multifunction button Single press
Hang up call Multifunction button Single press
Reject call Multifunction button Press and hold
(approximately 1s)
Play music mode Multifunction button Single press
Pause music mode Multifunction button Single press
Volume up Volume up button Single press
Volume down Volume down button Single press
Next Volume up button Press and hold
Previous Volume down button Press and hold

UE 5000
10 English
Visit Product Central
There’s more information about your
product. Take a moment tovisit Product
Central to learn more about your new
Logitech UE headphones.
Go to http://ue.logitech.com.cn
Troubleshooting
If your headphones are not working
or pairing/connecting properly,
try the following:
• Move closer. The range of the Bluetooth
wireless connection is up to 10 meters.
• Recharge, particularly if the battery
status LED continually flashes or does
not light. See “Charging your product.”
• Turn o other headsets in order to
avoid interference.
• Enable Bluetooth on your device, and
then select “Logitech UE 5000” from
the Bluetooth device list.
• To fix a Bluetooth connection
by repairing:
1. On your device:
Delete“LogitechUE5000”
fromtheBluetooth devicelist.
2. On the headphones: press and hold
the multifunction button for about
6 seconds until the blue LED light
flashes quickly, indicating that the
device is in “pairing” mode.
3. On your device: Select “Logitech UE
5000” from the Bluetooth device list.