Logitech UE9000 User manual

UE 9000
WirElEss
HEadpHonEs
USER
GUIDE

POWER
UP.
Turn on the UE 9000
Wireless Headphones.
Turn on your UE 9000
Wireless Headphones.
The Bluetooth® LED should blink blue rapidly,
indicating that the headphones are discoverable.

SYNC
UP. PRESS PLAY.
Pair your headphones with your Bluetooth-enabled device.
Apple iOS®
Go to Settings > General > Bluetooth.
Turn on Bluetooth.
Select “UE 9000” from “Devices.”
Optional: Pair additional Bluetooth-enabled devices.
You can pair your headphones with up to eight devices. To do so:
1. Move the slider to the “Bluetooth” position and hold it there until the
Bluetooth LED blinks rapidly blue, indicating that the headphones are discoverable.
2. Complete pairing according to the instructions on the previous page.
3. Press play on the device you’ve just paired.
When you’ve successfully paired a device, the Bluetooth LED will turn solid blue.
If pairing times out (the LED will blink slowly), move the slider to the “Bluetooth”
position and hold it there until the LED starts rapidly blinking again.
Press play on your media device.

GET TO KNOW YOUR
UE 9000 WIRELESS
HEADPHONES.
UE 9000 Wireless Headphones
Molded travel case
Optional audio cable with on-cord mic and controls
USB charging cable
AC adapter
¼-inch (6.35 mm) adapter
Microfiber polishing cloth
WHAT’S IN
THE BOX:
Volume up
Play/Pause
Call answer/hang up
Next track
Previous track
Volume down
Listen Through button
Micro USB charging port
3.5 mm input (Interrupts Bluetooth connection when connected)
On/O/Bluetooth connection slider
Bluetooth LED
Battery level LED
Click, or press and hold
Single click
Single click to answer/
press and hold to hang up
Double click
Triple click
Click, or press and hold
Music/Calling
On-ear controls On-cord controls

FEATURES:
LED BEHAVIOR.
Bluetooth LED Battery Level LED
O
Headphones o or connected to
an audio source via the 3.5 mm jack
Blue (blinking rapidly):
Discoverable/pairing mode
Blue (blinking slowly): Connecting
Blue (solid): Connected
O
Headphone o
Green (pulsing slowly): Charging
Green (solid): Power on; fully charged
Red: Low battery
When in wireless mode, all LEDs turn o automatically. However, the LEDs will illuminate
when there is a pairing change or a control is activated.
To use the “listen through” feature, press the Listen Through button once. Your music will be
muted and environmental sounds will be amplified into your headphones. To resume listening
to music, simply press the Listen Through button again.
The “listen through” feature is only available in wireless mode while listening to music. It is
not available in wired mode or during phone calls.

FEATURES:
CHARGING.
O
Headphone o
Green (pulsing slowly): Charging
Green (solid): Power on; fully charged
Red: Low battery
Typically a three-hour charge through an AC outlet provides up to 10 hours of power, and you
can use your headphones while they’re charging.
When the battery level LED turns red, you should recharge your headphones. To do so:
1. Charge the headphones via the supplied AC adapter or USB. The battery
level LED will pulse green.
2. When your headphones are fully charged, the battery level LED will glow
solid green.
or
Micro USB charging port USB charging cable
Computer USB port
AC power adapter

FEATURES:
TRAVEL STORAGE.
To safely store your headphones while you’re on the go:
1. Swivel the ear cups until they “click”.
2. Place the headphones flat in their case.
3. Place the AC adapter in the top pocket.
4. Place all cables and accessories in the bottom pocket.

PRODUCT CENTRAL.
There’s more information and support available for your product online.
Visit Product Central, where you can:
• Browse online articles and tutorials.
• Find tips about usage and information about additional features.
• Get help troubleshooting a problem.
• Download the latest software for your product.
• Find online documentation and warranty information.
• Connect with other users in our Community Forums to get advice,
ask questions and share solutions.
• Order spare parts (when available).
Go to www.logitech.com/support/ue9000

TROUBLESHOOTING.
If your headphones are not working or pairing/connecting properly, try the following:
• Move closer. The range of the Bluetooth wireless connection is up to
10 meters or 30 feet.
• Recharge, particularly if the battery level LED is red. See “Charging.”
• Try increasing the volume on the headphones, on your device or in your
media application. And if you’re connected to a computer, check the volume
settings for your operating system.
• Enable Bluetooth on your device, and then select “UE 9000” from the
Bluetooth device list.
• To x a Bluetooth connection by repairing:
1. On your device: Delete “UE 9000” from the Bluetooth device list
2. On the headphones: Move the slider to “Bluetooth” and hold until
the Bluetooth LED blinks blue.
3. On your device: Select “UE 9000” from the Bluetooth device list
4. From the media player on your Bluetooth device: Select “UE 9000”
• For computers, you may need to specify the headphone as the input/output
device for your operating system.
For help, go to www.logitech.com/support/ue9000