Logitech Z130 Assembly Instructions

Z130 STEREO SPEAKERS
Complete Setup Guide

English 3
KNOW YOUR PRODUCT
Right speaker
Power and
volume controls
3.5 mm auxiliary
cable
DC power plug
Left speaker
Headphone
jack
AC power
adapter

English 4
CONNECT THE SPEAKERS
1. Connect the DC power plug to the back of your right speaker and connect your AC adapter to the electrical outlet.
2. Connect to the 3.5 mm audio jack on your source device using the attached 3.5 mm auxiliary input on the right speaker.
3. (Optional) Connect your headphones to the headphone jack on the front of the right speaker.
4. Turn the speaker on using the power knob.
3.5mm
2
4
1
3
ADJUST THE VOLUME
Increase (or decrease) the speakers volume by rotating
the control knob clockwise (counter-clockwise)
ontheright speaker.
+-
© 2019 Logitech. Logitech, Logi and other Logitech marks are owned by Logitech and may
be registered. All other trademarks are the property of their respective owners. Logitech
assumes no responsibility for any errors that may appear in this manual. Information
contained herein is subject to change without notice.