Lopi Bostonian 564 User manual

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

Page 1 of 6 8/17/07 © Travis Industries, Inc.

Compatibility:

• 564 SS Fireplace

• 564 Electric Fireplace

Packing List:

• Face

• 564 SS Glass Frame Cover • 564 E Side and Hinge Brackets

• (2) 564 SS Top Brackets (w screws) • 564 E Upper Heat Shield

• (2) 564 SS Upper Mounting Brackets • 564 E Cove Cover

• (2) 564 SS Lower Mounting Brackets • (14) 8-32 Nuts

• (2) 10-24 1-1/2" Screws (564 SS only)

The center deflectors must be in place when using this face to prevent

the facing above the fireplace from becoming too hot. If this face is

replacing a Lopi Grill (96200801), make sure to replace the center

deflectors.

Installation Details – 564 SS

SIDE OF FIREPLACE

1”

0”TO 1”

NOTE:

This face has an adjustable bracket that allows for

different facing depths to be tucked under the face.

AAAAAAAAA

36”

29"

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

Page 2 of 6 6/24/08 © Travis Industries, Inc.

Installation – 564 SS

1 Remove the glass frame (see

the owner's manual for

details). Install glass frame

cover as shown to the right.

2 Install face mounting brackets

to the fireplace.

Push these tabs inwards

to lock the cover in place.

Place the cover over the top of the door frame.

Repeat these steps for the opposite side.

Upper

Bracket

Lower

Bracket

Upper

Left

Lower

Left

Upper

Right

Lower

Right

Bracket

Identification

Remove and discard the nuts and bushings

above and below the firebox.

Place the upper and lower brackets in place

and secure using the nuts included with this

kit.

Discard the stock

bushings and nuts.

Discard the stock

bushings and nuts.

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

Page 3 of 6 8/17/07 © Travis Industries, Inc.

Installation –564 SS (continued)

3 The facing and hearth (if applicable) must be installed prior to attaching the face. See the installation

manual for complete details.

Raised

Fireplaces

AAAA

Note how the tile is 1”

(maximum) above the

base of the fireplace.

AAAAAAA

AAAAAA

AAAA

AAA

AAAA

Maximum 1`”Hearth

Floor-Level

Fireplaces

AAA

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

Page 4 of 6 8/17/07 © Travis Industries, Inc.

Installation –564 SS (continued)

4 Install the face following the directions below.

Attach the upper brackets

to the face with the

included nuts. The upper

bracket consists of two

pieces - note orientation.

Slide the face into place. The

tabs on the upper brackets insert

into the slots on the fireplace

brackets, holding the face in place

while the screws are tightened.

a

b

c

The face is secured to the fireplace with four screws. Two

of the screws are fastened to the upper brackets with

press nuts. The lower screws are included with the face.

AAA

AAAAAAAAAAAAAAA

Optional Facing (and/or hearth) --

See the installation manual for details.

Plated Surfaces

Use denatured alcohol and a soft cloth to clean plated surfaces. Marks

left on the surface may damage the face.

Denatured

Alcohol

Soft Cloth

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

Page 5 of 6 8/17/07 © Travis Industries, Inc.

Installation –564 Electric

1 Install the upper heat shield onto the 564 E fireplace.

Remove the stock upper heat shield.

AAAAAAAAAAAA

AAAAAA

AAAAA

AAA

AAAAAAAAAAAA

AAAAAA

AAAA

Place the upper heat shield included with this kit

on top of the fireplace (note position of heat

shield). Place the stock heat shield on top of it

and secure with the same screws.

Bostonian (564) Wilmington Face

Black 95400186 Nickel 95400187

2 Place the face, face down, on a soft, non-scratching surface. Install the 564 Electric mounting brackets onto

the back of the face.

aRemove and

discard the

hinge assembly

from the face.

AAAAAAA

AAAAAAAA

AAAAAAA

AAAAAAAA

d

Attach the 564 E hinge bracket. Use

the nuts removed earlier.

Attach the 564 E side bracket.

Use the nuts included with

this kit.

Repeat steps “a”through

“c”for the opposite side.

eBefore installing the face

verify the lower grill is

centered. Loosen the nuts

and adjust if necessary.

b

c

3 Pull the electric fireplace out of the mantel (or built-in location). Attach the cove cover and face following the

directions below. Slide the fireplace back into place to complete the installation.

Tilt the face back slightly and insert the

bottom hooks into the slots on the fireplace.

AAAAAAAAAAAA

AAAAAA

AAAAA

AAA

Lift the face up slightly, tilt

it forward and insert the

top hooks until the face

locks in place.

b

AAAAAAAAAAAA

AAAAAAAAAAAAA

c

Hang the 564 E cove

cover over the glass -

this keeps light from

exiting the grill opening

along the top of the face.

a

Lopi Bostonian 564 User manual

Popular Fireplace Accessories manuals by other brands