lopital Nemo User manual

Shower(-toilet) chairs
Shower trolleys
Dressing tables
Rising aids
Cleaning and disinfection
protocol

1| Cleaning and disinfection protocol
Table of Contents
Introduction ............................................................................................................................................................2
Applying Common Cleaning/disinfectants to Lopital Products............................................................................3
Recommendations for cleaning and disinfection .................................................................................................4
Instructions by product........................................................................................................................................... 5
Nemo - Shower-toilet Chair...............................................................................................................................5
Flexo - Shower-toilet chair................................................................................................................................. 7
Elexo – Shower-toilet chair ................................................................................................................................9
Elexo XXL - Shower-toilet chair........................................................................................................................11
Reflex – Shower-toilet chair.............................................................................................................................13
Tango – Shower-toilet chair.............................................................................................................................15
Mylo - Shower-toilet chair ...............................................................................................................................17
Tango XL – Shower-toilet chair ........................................................................................................................19
Tango XXL – Shower-toilet chair ......................................................................................................................21
Timo – Shower(-toilet) chair............................................................................................................................23
Cleo – Shower(-toilet) chair.............................................................................................................................25
Marina basic & Marina deluxe – Shower trolley..............................................................................................27
Marina – Shower trolley...................................................................................................................................29
Sirocco – Wall-Mounted shower trolley...........................................................................................................31
Amfora – Wall-mounted Shower trolley..........................................................................................................31
Vienna – Wall-mounted dressing table ...........................................................................................................31
Stylex – Shower trolley.....................................................................................................................................33
Amfora – Shower trolley ..................................................................................................................................33
Vienna – Dressing table....................................................................................................................................33
Luxal – Shower trolley......................................................................................................................................35
Lotus – Rising aid..............................................................................................................................................37
Manufacturer
Lopital Nederland B.V.
Laarakkerweg 9
5061 JR Oisterwijk
The Netherlands
T [phone]
www.lopital.com
[email protected]
All of the aids produced by Lopital fulfil the following norms: MDR (EU) 2017/745, NEN-EN-ISO 14971, NEN-
EN 12182, ISO17966, IEC60529, IEC60601-1, IEC60601-1-2, IEC6060-1-6, IEC62366, CAN/CSA-C22.2 60601-1,
ANSI/AAMI ES60601-1, UNI-CEI-EN-ISO 13485, NEN-EN-ISO 9001, NEN-EN-ISO 14001

2| Cleaning and disinfection protocol
Introduction
These instructions apply to all Lopital shower-toilet chairs, shower trolleys, dressing tables and rising aids.
Cleaning and disinfection of Lopital products is necessary to prevent any sources of contamination
remaining on the product from being transferred. Products should therefore be cleaned and disinfected
after use.
To maintain the warranty and expected life, it is important to follow the recommendations in this protocol.
This protocol describes detailed cleaning and disinfection procedures for Lopital products. The instructions in
this protocol do not replace the cleaning and disinfection policy of your institution.
This protocol is only intended for persons who use Lopital products or who take care of cleaning,
disinfection and maintenance of the products. Failure to follow these instructions can lead to serious
damage to the products and/or invisible defects.
Lopital recommends cleaning and disinfecting the products before first use.
Lopital recommends cleaning and disinfecting the products when they are disposed of as waste. All parts
that are replaced or removed can be returned to Lopital. It is also possible to offer these parts to the
technician for destruction. We will ensure that all parts are processed in an environmentally friendly
manner.
Lopital products are constantly undergoing further development. We therefore reserve the right to change
products without prior notice. Lopital only offers express written warranty on the sale of products.
Information in this protocol is subject to change without notice. Please visit our website for the most
current version of this protocol or contact your Lopital account manager for advice and further information.
Safety advice
- When cleaning, wear appropriate protective equipment according to the manufacturer's
instructions and your institution’s protocols, such as: rubber gloves, goggles, apron, face mask, and
shoe protection.
- Before cleaning and disinfecting, unplug the product if applicable.
- Never clean the electric and hydraulic powered products by pouring water on them.
- Never use a steam cleaner for cleaning.
- Read the manufacturer's recommendations for cleaning and disinfecting the products.
Insufficient cleaning and disinfection increases the risk of cross-contamination!

3| Cleaning and disinfection protocol
Applying Common Cleaning/disinfectants to Lopital Products
Chemical class
Active component
pH
Cleaning
agents/Disinfectants*
Manufacturer
Must not be used on the
following parts:
Quaternary
ammonium
chloride
Didecyl dimethylammoniumchloride = 8.704%
Alkyldimethylbenzylammoniumchloride = 8.19%
9.0-10.0
during use
Virex II (256)
Johnson/Diversey
Foot board of the Lotus rising aid
and stretcher board of the
Marina/Luxal/ Sirocco shower
trolley
Quaternary
ammonium
chloride
Alkyldimethylbenzylammoniumchloride =
13.238%
Alkyldimethylbenzylammoniumchloride =
13.238%
9.5
during use
HB Quat 25L
3M
Accelerated
hydrogen peroxide
Hydrogen peroxide 0.1-1.5%
Benzyl Alcohol: 1-5%
Hydrogen peroxide 0.1-1.5%
Benzyl Alcohol: 1-5%
3
Oxivie Tb
Johnson/Diversey
Calf straps of shower-toilet chairs.
Phenolic
Orthophenylphenol = 3.40%
Orthobenzyl parachlorophenol = 3.03
3.1 +/- 0.4
during use
Wexcide
Wexford Labs
Chlorine
Sodium hypochlorite max. 1000 ppm
12.2
Dispatch
Caltech
Calf straps of shower-toilet chairs.
Alcohol
Isopropyl alcohol = 70%
5.0-7.0
Viraguard
Veridien
Hand controls of all products if
applicable
Benzyl-C12-18-
alkyldimethylamm
onium chlorides
Benzyl-C12-18-alkyldimethylammonium
chlorides (22%)
2-phenoxyethanol (20%)
Tridecyl polyethylenglycol ether (15%)
Propan-2-ol (8%)
approx. 8.6
during use
Terralin Protect
Shülke
Foot board of the Lotus rising aid
and stretcher board of the
Marina/Luxal/Sirocco shower
trolley
Organic peroxide
(type E, solid)
Magnesium monoperoxifalate hexahydrate (50-
100%)
Anionic surfactant (5-10%)
Nonionic surfactant (1-10%)
5.3
during use
Dismozone plus
Bode
Calf straps of shower-toilet chairs
Ethanol
Hydrogen peroxide (2.5-10%)
Lauryldimethylamine oxide (0-2.5%)
Ethanol (2.5-10%)
7
Anioxy Spray WS
Anios
Control box of the Luxal, Marina,
Sirocco, Amfora, Vienna
Troclosene sodium
Adipic acid 10-30%
Amorphous silicon < 1%
Sodium toluenesulphonate 5-10%
Troclosene sodium 10-30%
4-6
during use
Chlor-Clean
Guest Medical Ltd
Calf straps of shower-toilet chairs

4| Cleaning and disinfection protocol
Recommendations for cleaning and disinfection
To avoid the risk of contamination, all parts must be cleaned and disinfected after use.
All necessary precautions should be taken to remove all stains and dirt.
The cleaning and disinfection method described on the following pages applies specifically to Lopital
products and accessories. This method is designed to save time and prevent infections more efficiently.
Equipment:
- When cleaning, wear appropriate protective equipment (such as rubber gloves, goggles, apron,
face mask, and shoe protection) according to the manufacturer's instructions and your institution’s
protocols.
- Clean buckets
- Cleaning cloths for cleaning and drying
- Soft brush
- Warm water
- To find cleaning/disinfecting agents that may or may not be compatible with Lopital products,
follow the instructions in “Applying Common Cleaning/Disinfectants to Lopital Products” on page 3
of this document.

5| Cleaning and disinfection protocol
Instructions by product Nemo - Shower-toilet Chair
51005100
The Nemo must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Nemo may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Nemo are present, including
the footrests, the head support and the seat filler piece.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions.

6| Cleaning and disinfection protocol
Cleaning protocol
Cleaning
1. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
2. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth. For easy access to all
parts of the seat, adjust the seat to both the upright and reclined position.
3. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside)
- Seat cover
- Headrest
- Calf support
- Footrests
- Armrests
- Handles
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
4. Repeat the cleaning protocol - Cleaning after reading “Application of common
cleaning/disinfectants to Lopital products” on page 3 of this document. Follow the manufacturer's
directions for proper use of the disinfectant.
5. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

7| Cleaning and disinfection protocol
Flexo - Shower-toilet chair
51005199
The Flexo must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Flexo may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Flexo are present, including
the footrests and the seat filler piece.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions. This process will preferably be
carried out by Lopital or another authorised body. Lopital
offers the option of having the chair thoroughly inspected
and serviced once a year via Periodic Preventative
Maintenance.
For more information about the maintenance contract, please contact
Lopital ([email protected]) or speak to your supplier.

8| Cleaning and disinfection protocol
Cleaning protocol
Cleaning
1. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
2. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth. For easy access to all
parts of the seat, adjust the seat to both the upright and reclined position.
3. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside)
- Seat cover
- Calf support
- Footrests
- Armrests
- Handles
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
4. Repeat the cleaning protocol - Cleaning after reading “Application of common
cleaning/disinfectants to Lopital products” on page 3 of this document. Follow the manufacturer's
directions for proper use of the disinfectant.
5. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

9| Cleaning and disinfection protocol
Elexo – Shower-toilet chair
51005500
The Elexo must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Elexo may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Elexo are present, including
the footrests, the seat filler piece and the manual control.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
•Charge the battery at least once a week.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions. This process will preferably be
carried out by Lopital or another authorised body. Lopital
offers the option of having the chair thoroughly inspected
and serviced once a year via Periodic Preventative
Maintenance.
For more information about the maintenance contract, please contact
Lopital ([email protected]) or speak to your supplier.

10 | Cleaning and disinfection protocol
Cleaning protocol
1. Before cleaning and disinfecting, unplug the product if applicable.
Cleaning
2. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
3. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth. For easy access to all
parts of the seat, adjust the seat to both the upright and reclined position.
4. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside)
- Seat cover
- Calf support
- Footrests
- Armrests
- Handles
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
5. Repeat the cleaning protocol - Cleaning after reading “Application of common
cleaning/disinfectants to Lopital products” on page 3 of this document. Follow the manufacturer's
directions for proper use of the disinfectant.
6. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

11 | Cleaning and disinfection protocol
Elexo XXL - Shower-toilet chair
51005300
The Elexo XXL must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Elexo XXL may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Elexo XXL are present,
including the footrests, the seat filler piece and the manual
control.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
•Charge the battery at least once a week.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions. This process will preferably be
carried out by Lopital or another authorised body. Lopital
offers the option of having the chair thoroughly inspected
and serviced once a year via Periodic Preventative
Maintenance.
For more information about the maintenance contract, please contact
Lopital ([email protected]) or speak to your supplier.

12 | Cleaning and disinfection protocol
Cleaning protocol
1. Before cleaning and disinfecting, unplug the product if applicable.
Cleaning
2. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
3. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth. For easy access to all
parts of the seat, adjust the seat to both the upright and reclined position.
4. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside)
- Calf support
- Footrests
- Armrests
- Handles
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
5. Repeat the cleaning protocol - Cleaning after reading “Application of common
cleaning/disinfectants to Lopital products” on page 3 of this document. Follow the manufacturer's
directions for proper use of the disinfectant.
6. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

13 | Cleaning and disinfection protocol
Reflex – Shower-toilet chair
51005600, 51005605
The Reflex must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Reflex may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Reflex are present, including
the footrests, the headrest, the seat filler piece and the
manual control.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
•Charge the battery at least once a week.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions. This process will preferably be
carried out by Lopital or another authorised body. Lopital
offers the option of having the chair thoroughly inspected
and serviced once a year via Periodic Preventative
Maintenance.
For more information about the maintenance contract, please contact
Lopital ([email protected]) or speak to your supplier.

14 | Cleaning and disinfection protocol
Cleaning protocol
1. Before cleaning and disinfecting, unplug the product if applicable.
Cleaning
2. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
3. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth. For easy access to all
parts of the seat, adjust the seat to both the upright and reclined position.
4. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside)
- Seat cover
- Headrest
- Calf support
- Footrests
- Armrests
- Handles
- Manual control (option) or control panel on the back canopy
- On/off switch
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
5. Repeat the cleaning protocol - Cleaning after reading “Applying common cleaning/disinfectants to
Lopital products” on page 3 of this document. Follow the manufacturer's directions for proper use
of the disinfectant.
6. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

15 | Cleaning and disinfection protocol
Tango – Shower-toilet chair
51005700
The Tango must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Tango may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Tango are present, including
the footrests and the seat filler piece.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions.

16 | Cleaning and disinfection protocol
Cleaning protocol
Cleaning
1. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
2. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth.
3. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside)
- Seat cover
- Footrests
- Armrests
- Handles
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
4. Repeat the cleaning protocol - Cleaning after reading “Applying common cleaning/disinfectants to
Lopital products” on page 3 of this document. Follow the manufacturer's directions for proper use
of the disinfectant.
5. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

17 | Cleaning and disinfection protocol
Mylo - Shower-toilet chair
51005701
The Mylo must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Mylo may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Mylo are present, including
the removable seat.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions.

18 | Cleaning and disinfection protocol
Cleaning protocol
Cleaning
1. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
2. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth.
3. Pay extra attention to the following surfaces:
- Backrest
- Seat (also underside, the seat is
easily foldable and removable)
- Footrests
- Armrests
- Handles
- Bedpan guides
- Wheels
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
4. Repeat the cleaning protocol - Cleaning after reading “Applying common cleaning/disinfectants to
Lopital products” on page 3 of this document. Follow the manufacturer's directions for proper use
of the disinfectant.
5. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.

19 | Cleaning and disinfection protocol
Tango XL – Shower-toilet chair
51005705
The Tango XL must be cleaned after every use, with water and regular household cleaning agents. PUR
integrated foam components with IMC coating should be rubbed clean and disinfected. Do not use any
abrasive or other aggressive cleaning products. If necessary, the PUR components can be disinfected with a
solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon the lifespan of the PUR
components. As a result of the material properties of PUR, contact with sharp objects must be avoided. This
could lead to damage or tears in the material. Finally, we would like to point out that non-critical parts of
the PUR components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when necessary. Maintenance and
repairs to the Tango XL may only be carried out by authorised personnel.
Maintenance schedule
After every use
•
Clean chair with water and regular household cleaning
products (see next page).
•PUR foam components must be cleaned and disinfected.
•Check to ensure all parts of the Tango XL are present,
including the footrests.
Weekly
•
Check wheels for hairs, dus tand soap residues and remove
if necessary.
•Check that the chair is still working correctly.
Annually
•
According to the medical devices regulation MDR (EU)
2017/745 a chair must be maintained in line with
manufacturer’s instructions.