Lorex L16481 User manual

www.lorexcctv.com
L164-81 Page 1 Rev. 3
BUSINESS & HOME SECURITY
STEP 1
SETTING UP YOUR DIGTIAL VIDEO RECORDER (DVR)
Package Contents
1 - Digital Video Recorder (4 Channel)
1 - 80 GB Hard Disk Drive
1 - Remote Control
1 - Power Adapter
8 - RCA/ BNC Connectors
2 - Keys (for hard drive cartridge plus screws)
5 - RCA Cables
1 - Owner’s Manual
1 - Quick Installation Guide
*This set-up guide assumes you are connecting the DVR to a Lorex Observation System. Refer to your Observation System manual to learn how to set-up the observation monitor.
Consult your DVR’s owners manual for alternative DVR connection options.
1Connect the supplied
RCA/BNC connector
to the monitor’s CH1,
CH2, CH3, CH4 Video
Output
BACK OF A LOREX MONITOR
4Connect supplied
video cable from the
video OUT of the DVR
to the video VCR IN of
the monitor
DVR- Back Jack Panel
Monitor-
Back Jack Panel
Cameras
BNC VIDEO INPUT
RCA
INPUT
DIN
INPUT
BNC
OUTPUT
RCA
VIDEO
OUT
7Press the power
button to turn
ON the DVR
FRONT OF THE DVR
2Connect the supplied
RCA/BNC connector to
the DVR’s CH1, CH2,
CH3, CH4 Video
Output
BACK OF THE DVR
5Connect the DVR to
an electrical outlet
BACK OF THE DVR
FRONT OF A LOREX MONITOR
8Press the VCR button
to enable DVR
function (located at the
front of the Lorex moni-
tor)
3Connect the supplied
video cable from CH1
video input of the
DVR to the CH1 video
output of the monitor.
(Repeat this Step for Ch2,
Ch3, Ch4)
BACK OF THE DVR BACK OF A LOREX MONITOR
6Turn the Master power
switch ON (located at the
back of the DVR)
BACK OF THE DVR
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.

www.lorexcctv.com
L164-81 Page 2 Rev. 3
BUSINESS & HOME SECURITY
STEP 2
RECORDING AND REVIEWING SAVED IMAGES
*For advanced features in recording, playback options and search functions, refer to the DVR’s owner’s manual.
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.
1Press the record
button on the
DVR
FRONT OF THE DVR
3Press the Stop
button on the
DVR
FRONT OF THE DVR
5Using the UP/Down
button, move the
pointer to manual
REC Event, next
press the select
button
FRONT OF THE DVR
7Select the
camera button
on the monitor to
display the images
in full screen
FRONT OF THE LOREX MONITOR
2Record the image
for 1-2 minutes
(ideally someone
should be moving in
front of the camera) 
4Press the Play
button to enter
the ‘Search’ menu
FRONT OF THE DVR
6Press the
Play button
to view the
recorded
image
FRONT OF THE DVR
8Turn the DVR’s
Shuttle button
Left/Right to
Rewind/Pause/
Fast Forward the
recorded event
FRONT OF THE DVR
It’s all on the web






Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Updates
Firmware Upgrades
FOR ADDITIONAL INFORMATION OR TROUBLESHOOTING HELP, REFER
TO YOUR OWNERS MANUAL FOR ASSISTANCE. YOU CAN ALSO CALL OR
EMAIL FOR FURTHER SUPPORT.
TOLL FREE TECHNICAL SUPPORT: 1-888-42 LOREX (1-888-425-6739)
EMAIL SUPPORT: [email protected]
WEBSITE: WWW.LOREXCCTV.COM