Lorex HC64A Series User manual

Lorex Smart Home
Security Center (LSHSC) &
Wire-Free Camera System
Quick Start Guide
HC64A Series
lorex.com
En
Start
here!
HC64A_QSG_TRILINGUAL_R4.indd 1HC64A_QSG_TRILINGUAL_R4.indd 1 2021-06-15 4:41:48 PM2021-06-15 4:41:48 PM

• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Use the camera within given temperature, humidity and voltage levels noted in the camera’s
specications.
• Do not disassemble the camera.
• Do not point the camera directly at the sun or a source of intense light.
• Do not place the camera near air conditioners and other air outlets.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based
cleaners.
• Refer to the battery safety rules insert.
Safety precautions
• The LSHSC and extender are rated for indoor use only. Do not use outdoors.
• Only use the devices with the included power supply.
• Only use the devices with compatible memory. See the product support page for details on compatible
memory.
• The LSHSC is required to operate the extender.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night
viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and
indicates that the camera lter is working.
• Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability
for use of its products that does not conform with local laws.
Disclaimers
Attention
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with this bundle (included).
Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.
HC64A_QSG_TRILINGUAL_R4.indd 2HC64A_QSG_TRILINGUAL_R4.indd 2 2021-06-15 4:41:48 PM2021-06-15 4:41:48 PM

Contents
PackageContents..................................................1
Before You Start.................................................... 2
LSHSC Overview....................................................3
LSHSC Status Indicator & Basic Operations........4
LSHSC Setup..........................................................5
Network Setup.......................................................6
Device Setup..........................................................7
LSHSC App Setup..................................................8
LSHSC Home Screen.............................................9
LSHSC Live View....................................................10
LSHSC Swipe-down Menu....................................11
LSHSC Placement..................................................12
Lorex Voice Assistant............................................13
Camera Overview...................................................14
Camera Status Indicator....................................... 15
Extender Status Indicator......................................21
Extender Setup & Placement.................................22
Extender Device Settings......................................23
Camera Setup & Placement..................................16
Camera Mounting..................................................18
Extender Overview.................................................20
HC64A_QSG_TRILINGUAL_R4.indd 3HC64A_QSG_TRILINGUAL_R4.indd 3 2021-06-15 4:41:48 PM2021-06-15 4:41:48 PM

Power Adapter
(x1)
6.6ft (2m) Power
Cable (x1)
Extender
(x1)
*May include one or more, depending on the package purchased.
Package Contents
1
Lorex Smart Home
Security Center (LSHSC)
(x1)
LSHSC Power Adapter
(x1)
Ethernet Cable
(x1)
Pre-inserted
Memory Card
(x1)
Wire-Free Camera
(x2)* Battery Pack
(x2)*
Mounting Bracket
(x2)*
Anchors (x6)*
Screws (x6)*
6.6ft (2m) Power
Cable (x1)*
Power Adapter
(x1)*
Mounting Plate
(x2)*
Mounting Template
(x2)*
HC64A_QSG_TRILINGUAL_R4.indd 4HC64A_QSG_TRILINGUAL_R4.indd 4 2021-06-15 4:41:51 PM2021-06-15 4:41:51 PM

2
Before You Start
1. Use the power adapters and cables to charge the batteries.
2. When fully charged, the battery status indicator will turn green.
To charge the battery pack:
Green - Battery fully chargedRed - Battery low
The camera batteries come partially charged (due to safety regulations). Please fully charge the
batteries prior to use, and before you begin your setup. This will take 4-6 hours.
HC64A_QSG_TRILINGUAL_R4.indd 5HC64A_QSG_TRILINGUAL_R4.indd 5 2021-06-15 4:41:54 PM2021-06-15 4:41:54 PM

3
LSHSC Overview
FRONT BACK
TOP
1
1. Microphones
2. Microphone on/off
3. Decrease volume
4. Camera lens cover
5. Increase volume
6. Power/lock screen
7. Camera
8. Light sensor
9. Touchscreen
10. Status indicator
11. Speakers
12. Antennas
13. SSD cover
14. Power port
15. Ethernet port
16. microSD card slot
17. Pairing/reset button
18. USB port
23456
7
8
9
10
11
14
15
12
13
16
17
18
HC64A_QSG_TRILINGUAL_R4.indd 6HC64A_QSG_TRILINGUAL_R4.indd 6 2021-06-15 4:41:58 PM2021-06-15 4:41:58 PM

Touchscreen Gestures
From the left edge, swipe right
for the previous screen
From the bottom edge,
swipe up for the home screen
From the top edge, swipe
down for the drop-down menu
4
LSHSC Status Indicator & Basic Operations
Status Description
(flashing) Voice assistant activated
(solid) Home (sensors only)
(solid) Disarmed (sensors only)
(solid) Away (sensors only)
(solid) System error (sensors only)
HC64A_QSG_TRILINGUAL_R4.indd 7HC64A_QSG_TRILINGUAL_R4.indd 7 2021-06-15 4:41:59 PM2021-06-15 4:41:59 PM

1. Using the provided LSHSC power adapter, connect to
a power outlet.
2. Follow the on-screen instructions to complete
the device setup.
Optional: Face Unlock
Enable this feature to unlock the LSHSC with your face.
Make sure the built-in camera's lens cover is opened
and that nothing is covering your face. Position your
face directly in front of the camera with a reasonable
amount of light on your face.
5
LSHSC Setup
Note:
• Three faces can be stored for the Face Unlock feature.
• If you forget both your passcode and device password, you will need to reset the LSHSC.
Press down on the reset button until a warning pop-up appears. Select Yes.
HC64A_QSG_TRILINGUAL_R4.indd 8HC64A_QSG_TRILINGUAL_R4.indd 8 2021-06-15 4:42:00 PM2021-06-15 4:42:00 PM

Central placement of the LSHSC is important for the Lorex devices to communicate directly with the
LSHSC and the router.
Choose your preferred connection set up method from the following three options:
Wired: Tap the wired icon and connect the LSHSC to your home router using the provided
Ethernet cable.
Wireless: Tap the wireless icon, select your Wi-Fi network from the list, then enter the Wi-Fi
password to connect.
Requires a dual-band router (2.4GHz / 5GHz) with 5GHz Wi-Fi network.
6
Network Setup
Oine: Tap the offline icon to setup through a direct connection. No Internet connection is
required to operate it or connect it to different Lorex devices.
You will not be able to use the Lorex Home App to access the LSHSC remotely and will
not receive automatic update notications.
HC64A_QSG_TRILINGUAL_R4.indd 9HC64A_QSG_TRILINGUAL_R4.indd 9 2021-06-15 4:42:01 PM2021-06-15 4:42:01 PM

To add a device, at the Device Setup screen, select the device icon and tap Next.
Note: Ensure your cameras are charged, powered on and located near the LSHSC for initial setup.
Once set up, you can move your devices to their nal locations as long as they are within range of the
LSHSC.
7
Device Setup
If you plan to set up other types of Wi-Fi cameras and/or a doorbell on the LSHSC, visit
lorex.com/compatibility to determine the right setup method for that device (either direct setup method
or app setup method).
HC64A_QSG_TRILINGUAL_R4.indd 10HC64A_QSG_TRILINGUAL_R4.indd 10 2021-06-15 4:42:02 PM2021-06-15 4:42:02 PM