LORUS R23 Series User manual

INSTRUCTION MANUAL FOR
WATCH CALIBRE
Y704D
THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed or placed inside any part of the body, the battery can
cause severe or fatal injuries within 2 hours or less.
Button batteries are hazardous. Keep batteries out of reach of children.
If you think the battery may have been swallowed or placed inside any
part of the body, seek immediate medical attention. Contact the
Australian Poisons Information Centre immediately on 13 11 26
(New Zealand 0800 764 766) for 24 / 7 fast, expert advice.

NREY704D 10-2005
CAL. Y704 (R23 SERIES)
Lap/Reset Start/Stop
B
D
Minute
Alarm
indicator
Second
AM/PM
indicator
Hour
■BUTTONS AND DISPLAY
■CHARACTERISTICS
1. TIME/CALENDAR MODE
Hour, minute, second, year, month, date and
the day of the week.
•Automatic Calendar Function
Calendar adjusts automatically for odd
and even months including Februaries of
leap years.
•Time Display Format
Choice of time display format, either 12-
hour display with AM/PM indicators or 24-
hour display, is available.
2. DAILY ALARM
The alarm can be set to sound on a 24-hour
basis.
3. STOPWATCH
The stopwatch can measure up to 9 hours
59 minutes and 59 seconds in 1/100 second
increment. The stopwatch features the
following functions;
•Standard Measurement
•Accumulated Elapsed Time Measurement
•Lap Time Measurement
Up to 5 lap times can be measured and
recorded.
•Memory Recall Function
Each recorded lap time and the fastest
and slowest lap times can be recalled
after measurement.
4. ILLUMINATING LIGHT
The built-in electroluminescent backlight
illuminates the display for easy viewing in
darkness.
AC

B
AC
AC
■HOW TO SET THE TIME/CALENDAR
Hour Minute
Second
AM/PM indicator for
12-hour display only
1. Press button B to go to the Time/Calendar
Mode.
2. Press and hold button B for 2 seconds, the
display changes to the Time/Calendar
Setting Mode. The second numeral starts
flashing.
3. Press button A to select an item to be
adjusted. Items change over in the following
order.
■HOW TO SET THE ALARM
Alarm indicator
Minute
Hour
Mode SlectionIlluminating light
B
D
indicator
Second
AM/PM
indicator
Press button B to select display mode. Display
mode changes over in the following order by
each press of the button.
Time/Calendar Mode
Stopwatch Mode Alarm Mode
✥When an item is selected for adjustment,
it starts flashing.
Second Minute Hour
Year MonthDate 12-/24-hour
display
‹
‹
‹
‹
‹‹
‹
B
BB
4. Use button C to adjust each item.
✥For the second setting, while the second
numeral is flashing, press button C in
accordance with a time signal. The
second numeral is reset to “00” and starts
counting immediately.
✥For the choice of time display format,
each press of button C selects alternately
12-hour display or 24-hour display.
✥For the minute, hour, month, date and
year settings, each press of button C
advances the displayed numeral by one.
Keep button C pressed to advance the
numeral quickly.
5. Press button A to confirm the adjustment of
the selected item and move on to the next
item.
6. Upon completion of all necessary
adjustments, press button B to return to the
Time/Calendar Mode.
✥Under 12-hour display, an “AM” indicator
in the morning and a “PM” indicator from
the afternoon are displayed.
✥Once year, month and date are set, the
day of the week is automatically set
accordingly.
C
How to check the calendar
Keep button C pressed while in the Time/
Calendar Mode. While the button is kept
pressed, the day of the week, month and date
are displayed.
Month Date
Day of the week

B
AC
1. Press button B to go to the Alarm Mode.
Alarm Mode indicator “AL” appears.
2. Press and hold button B for 2 seconds to
change the display to the Alarm Setting
Mode. The hour numeral starts flashing.
3. Use button C to set the hour.
✥Each press of button C advances the
displayed numeral by one. Keep button C
pressed to advance the numeral quickly.
4. Press button A to confirm the hour setting and
move on to the minute setting. The minute
numeral starts flashing.
5. Use button C to set the minute.
✥Each press of button C advances the
displayed numeral by one. Keep button C
pressed to advance the numeral quickly.
6. Press button B to complete the alarm setting.
7. Press button C to engage the alarm. The
alarm indicator appears.
8. Upon completion of all necessary
adjustments, press button B to return to the
Time/Calendar Mode.
Alarm engagement/disengagement
Press button C in the Alarm Mode. Each press of
button C alternately engages or disengages the
alarm. When the alarm is engaged, the alarm
indicator appears at the upper-right corner of
the display regardless of the display mode.
How to stop the alarm while sounding
The alarm sounds for one minute at the
designated time. To stop it manually while
sounding, press any button in any display mode.
How to check the alarm time
Keep button A pressed in the Time/Calendar
Mode. While the button is kept pressed, the set
alarm time is displayed.
■HOW TO USE THE STOPWATCH
•The stopwatch can measure up to 9 hours,
59 minutes and 59 seconds in 1/100-second
increment. When the measurement is over 9
hours 59 minutes 99, the stopwatch will be
reset to “0:00’00”00” and start counting
again.
Stopwatch operation
Press button B to go to the Stopwatch Mode.
Hour Minute Second
1/100
second
AC
Alarm engaged
Alarm disengaged
B
■HOW TO SET THE ALARM
Alarm indicator
Minute
Hour
Alarm mode
indicator
AM/PM indicator for
12-hour display only
Day of the week
NREY704D 05.10.12, 2:30 PMPage 1 AdobePageMaker6.5J/PPC

B
AC
•Even if the display is changed from the
Stopwatch Mode to another while
measurement is in progress, the stopwatch
continues timing properly. However, after
measurement is finished, be sure to reset the
stopwatch in order to avoid wasting its
battery energy.
✥Press button A to reset the stopwatch after
measurement.
A
Lap Time Measurement
Up to 5 lap times can be displayed and
recorded during measurement. In order to recall
the recorded lap times after measurement, use
Memory Recall Function before resetting the
stopwatch.
1. Press button C to start the stopwatch.
2. Press button A to check lap time. The lap time
is displayed and recorded while the
measurement of total running time is still in
progress.
3. Press button C to stop the measurement.
4. Press button A to reset.
A
CA A A
Start Stop Reset
Lap1 Lap2 Lap3
○○○
Up to Lap 5
C
✥With each press of button A, the display
shows the lap time for 5 seconds and
automatically return to the display of total
running time.
Memory Recall Function
1. When the lap time measurement is finished,
press button B to go to the Memory Recall
Display.
Fastest lap number
2. Press button A to read each recorded lap
time. The fastest and the slowest lap times
as well as each recorded lap time are
displayed in the following order.
A
CC
Start Stop Reset
Standard Measurement
1. Press button C to start and stop the
stopwatch.
2. Use button A to reset the stopwatch.
CA
C C C
Start Stop Restart Stop Reset
○○○
Accumulated Elapsed Time Measurement
1. Press button C to start, stop and restart the
stopwatch as many times as required.
2. Use button A to reset the stopwatch.

•WATER RESISTANT
*If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
Condition
of use
Accidental
contact
with water,
such as
lh
Swimming
and taking
ashower
Skin
diving Scuba diving
Indication
■BATTERY CHANGE
The miniature lithium battery Maxell CR2032,
which powers your watch, should last approxi-
mately 3 years. However, because it is inserted
at the factory, the actual life of the battery once
in your possession may be less than 3 years. Be
sure to replace the battery to prevent any
possible malfunction as soon as it runs down. To
replace the battery, we recommend taking the
watch to a local watch repair shop.
Note: If the illuminating light is used for longer
than 2 seconds per day, the battery
life may be shorter than the above
specified period.
■CARE OF YOUR LORUS WATCH
This watch contains precise electronic
components. Never attempt to open the case
or remove the back cover.
•BATTERY
CAUTION
Do not expose the old battery to fire
or recharge it. Keep it at a place
beyond the reach of children. If a
child swallows it, consult a doctor
immediately.
✥Use button C to display the lap times in the
reverse order.
3. Press button B to return to the Time/Calendar
Mode.
■ILLUMINATING LIGHT
Press and hold button D. The light illuminates the
display with 3 seconds delay.
D
Fastest lap number
Fastest lap time
Slowest lap number
Slowest lap time
Lap number 1
Lap time for Lap 1
Lap number 2
Lap time for Lap 2
Lap number 3
Lap time for Lap 3
Up to Lap number 5
2. Press button A to read each recorded lap
time. The fastest and the slowest lap times
as well as each recorded lap time are
displayed in the following order.

Caution:
Leather straps are not water resistant except so
indicated, even if the watch head is water
resistant.
•ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and those
with delicate skin may develop a rash. Please
wear the watch with some play to avoid any
possible allergic reaction. If you develop a rash
on your wrist, stop wearing and consult a
physician.
•MAGNETISM/STATIC ELECTRICITY
Your watch will not be affected by magnetism
generated by household electric appliances
but keep your watch away from a place where
the watch is subject to strong electric field and
static electricity.
•SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, However, be careful not to drop it or
hit it on hard surfaces and avoid any severe
impacts.
•TEMPERATURE
Your watch works with stable accuracy within a
temperature range between 0˚C and 50 ˚C. Do
not expose the watch to a place exceeding this
temperature range.
•CLEANING
Use only a soft cloth and clean water for
cleaning your watch. Never use chemicals,
especially soap.
■SERVICE
When your LORUS watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
Printed in China
If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
•Do not operate the buttons when the watch
is wet.
•If the watch is exposed to salt water, rinse it
in fresh water and then wipe it thoroughly
dry.
•Should you find any water or condensation
inside the watch, immediately have it
checked. Water can corrode electric parts
inside the case.
NO NO NO
YES
YES
YES NO NO
YES YES NO
Condition
of use
Accidental
contact
with water,
such as
splashes
and rain
Swimming
and taking
a shower
Skin
diving Scuba diving
Indication
on the dial/
case back
No
Indication
NO NO NO
YES
WATER
RESISTANT
WATER
RESISTANT
(50M/5 BAR )
WATER
RESISTANT
100M/10 BAR
or above
(
NO
(
NREY704D 05.10.12, 2:30 PMPage 2 AdobePageMaker6.5J/PPC