LUMENWERX QUAD N-W FLUORESCENT User manual

*
WALL MOUNT - INSTALLATION
Make sure the power to the fixture (A) is turned
off. Mounting points on the fixture according to
the client drawings.
Remove lens (B). Unscrew the reflector (C) and
remove it.
Screw back in place the reflector (C).
Insert wall power cable wires (D) inside the fixture
(A).
A
D
*
Install the fixture (A) on the wall according to the
dimensions [*] given in the client drawings. Screw
the fixture (A) to attach it to the wall.
A
Make wire connection inside the fixture between
fixture (A) and wall power cable (D).
D
A
NOTE: Wire dimming conductors as Class 1
A
B
C
C
WWW.LUMENWERX.COM
QUAD N-W FLUORESCENT
IMPORTANT: Installation instructions are shown with Quad Narrow and applies to all Quad sizes
1
4
2
5
3
6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC. FILE NAME:QUAD-FLU-WALL-MOUNT-INST November 14, 2019 Page: 1 / 3
LumenWerx ULC. reserves the right to change or modify product specifications without notification
SINGLE FIXTURE

CONTINUOUS SYSTEM
For a continuous system, remove lens (B) from all
fixtures in the run.
Unscrew the reflectors (C) and remove them from
all fixtures. Place the reflectors in a safe place.
Install the lamp (E) and reinstall the lens (B) back in
place.
Locate mounting points of the first fixture (A) and
then insert wall power cable (D) inside the fixture
(A).
A
D
*
Install the fixture (A) on the wall according to the
dimensions [*] given in the client drawings. Screw
the fixture (A) to the wall without overtighten.
A
Make wire connection inside the fixture between
fixture (A) and wall power cable (D).
A
D
B
C
B
E
WWW.LUMENWERX.COM
7
10
8
11
9
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC. FILE NAME:QUAD-FLU-WALL-MOUNT-INST November 14, 2019 Page: 2 / 3
LumenWerx ULC. reserves the right to change or modify product specifications without notification
WWW.LUMENWERX.COM
12
WALL MOUNT - INSTALLATION
QUAD N-W FLUORESCENT

HF
A
GG
G
G
F
A
Install the lamps (E) and reinstall the lens (B) back in
place.Screw back in place the reflectors (C).
Join fixtures together and attach the two fixtures
(A) and (F) by fastening screws on the joiners (G).
Repeat steps 13 to 15 for all others fixtures. Then
tighten all screws securing the fixtures on the wall.
Align both joiners (G) and connect wires between
joining fixtures (A) and (F) using quick connectors
(H).
Locate mounting point of the second fixture and
install it. Fasten the second fixture (F) to the wall
without overtighten.
F
B
E
C
WWW.LUMENWERX.COM
13
16
14
17
15
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC. FILE NAME:QUAD-FLU-WALL-MOUNT-INST November 14, 2019 Page: 3 / 3
LumenWerx ULC. reserves the right to change or modify product specifications without notification
WWW.LUMENWERX.COM
WALL MOUNT - INSTALLATION
QUAD N-W FLUORESCENT