Lund 84127 User manual

Page 1 of 4
Installation Instructions
Original Bar Grille
Important Safety Information
CAUTION
PRECAUCIÓN
ATTENTION
!
Illustrations may vary upon application
Sometimes the billet products get bent in the shipping process. You may need to hand bend
them to attain the desired shape.
To avoid risk of personal injury or property damage:
• Wear safety glasses and gloves while installing billet inserts.
• Use caution when working with any power tools.
• Check clearance on vehicle.
• Make sure that the billet inserts are secured in place and clears
all moving parts of the vehicle.
• Routinely check security of hardware.
• Do not use automatic “brush-style” car washes.
Contents
Tools Required
Shipping Note
Care and Cleaning
Congratulations!
Page 4 of 4
Flat Head
Screwdriver
Phillips
Screwdriver
Safety Glasses
and Gloves
Ratchet with
10mm Socket
I-sheet Rev. A2
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-5863.
Lund International, Lund Accessories Division
775 Tipton Industrial Drive, Building 2, Suite F
Lawrenceville, GA 30045
Phone [phone] • Fax [phone] • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
Lund® and the Lund® logo are trademarks of Lund International, Inc.
You have purchased one of many quality Lund® branded products offered by Lund
International, Inc. We take the utmost pride in our products and want you to enjoy
years of satisfaction from your investment. We have made every effort to ensure that
your product is top quality in terms of fit, durability, finish and ease of installation.
To keep your billet grille looking their best, we recommend using only mild soap and
water and a soft cotton cloth to wash and dry it. Use of rough cleaning agents or
cloths may scratch or dull your billet grille.
Should your billet grille become scratched or dull, we recommend TRENZ® Metal
Polish to bring back the mirror finish. There are three grades of TRENZ® Metal Polish
(Coarse, Medium and Fine) that will help you keep your billet grille looking brand new.
Select the TRENZ® Metal Polishes best for your needs:
1. Course (Red) Polish – For severe scratches and pitted problems.
2. Medium (Green) Polish – For light scratches and dulling problems.
3. Fine (White) Polish – To bring back the mirror finish.
TRENZ® Metal Polish can be used on all metal products, including aluminum, stain-
less steel, brass and copper. If you have additional questions or concerns on the
maintenance of your Lund® billet grille, please call us at 800-328-5863. You may also
use high quality commercially available polish recommended for aluminum accesso-
ries.
Part Number 84127
Billet Grille
4 - 10/32 (N6)
Kep Nuts
4 - 1/4 x 1”
(W19) Washers
10 - Hair Pin Clips
10 - Slider Tabs

Remove the four (4) screws with a Phillips screwdriver and save them for reinstallation.
Behind the grille shell, there are two steel clips holding the bottom of the grille shell. Using a flat head
screwdriver, pull upward on the bottom of the clip and pull the grille shell forward.
Installation Steps
1
2
Clip the bottom of the grille shell back on the truck and secure the top of the grille using the four (4)
screws that were removed in the first step. Make sure everything is secured and close the hood. Enjoy
your award-winning grille that you have just installed!
Locate the side Billet Grille inserts. Insert
them from the front of the grille shell.
Secure side grilles by using fender
washers and Kep nuts provided.
34
Steel
Clip
Grille Shell
Starting with the center grille inserts, slide one grille insert at a time from the front of the grille shell.
The mounting tabs should go through the grille shell mesh. Using the slider tabs and the hair pin clips,
slide one slider tab from the top into each of the mounting tab holes.
Page 2 of 4 Page 3 of 4
Illustrations may vary upon application
Side View
Billet Grille
Main Center Grilles
Stock Grille Mesh
Rear View
Billet Grille
Side View
Stock Grille Mesh
Side Grilles
Washer
Kep Nut