Lutron Electronics Hi-lume Premier User manual

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 1 09.13.16
The Hi-lume®Premier 0.1% Constant Voltage Driver
(L3D0) is a high-performance LED driver capable of
controlling up to 96 W of 24 V- constant voltage
loads. This driver provides smooth and continuous
dimming down to 0.1% low-end. It is ideal for use with
strip lighting in applications such as coves, under or
over cabinet lighting and pathway lighting. The driver is
UL®Listed with an integrated wiring compartment and
can be mounted up to 150 ft (45 m) away from the
load.
Features
• Continuous, flicker-free dimming from 100% to 0.1%
1.
• Soft-on, Fade-to-BlackTM operation for EcoSystem®
controls: fades smoothly between 0% and 0.1% when
turned on and off for an incandescent like experience.
2
• PWM dimming meets IEEE1789 over the entire
dimming range.
• UL®Listed for United States and Canada (cULus®).
• NOM certified for Mexico.
• Field Adjustment Knob offers customer low-end light
output tuning for better fixture-to-fixture matching.
• Guaranteed dimming performance when used with
Lutron®controls:
– HomeWorks®QS, Energi Savr NodeTM units with
EcoSystem®controls, GRAFIK Eye®QS with
EcoSystem®controls, PowPak®with EcoSystem®
dimming modules, PowPak®with EcoSystem®
wireless fixture controls, and Quantum®systems,
allowing for integration into a planned or existing
EcoSystem®lighting control solution.
– Lutron®3-wire controls and interfaces.
• Protected from miswires of input power, up to 277 V~,
to EcoSystem®control inputs...
•Rated lifetime of 50,000 hours at 40 °C (104 °F)
ambient temperature and maximum loading.
• FCC Part 15 compliant for commercial applications at
120 –277 V ~ and residential applications at 120 V ~.
• In rush limiting allows full loading of circuit breakers
without nuisance tripping.
1Light output at 0.1% depends on installation and light engine efficacy.
2Soft-on, Fade-to-BlackTM dimming technology is not available for 3-wire controls.
Hi-lume
®
Premier 0.1% EcoSystem
®
/ 3-wire
Constant Voltage 24 V-LED Driver with
Soft-on, Fade-to-BlackTM
• 100% end-of-line performance tested at a Lutron®
factory.
• RoHS compliant.
• Restores all settings after power failure.
• Barrier provided for Class 2 separation in the wiring
compartment.
• Redundant connections on line and control terminals
for easy daisy chain wiring.
• Redundant connections on output terminals allow for
easy wiring of two LED load home runs.
• Class 2 output designed to withstand hot swap.
• For more information please visit: www.lutron.com
Hi-lumeRPremier 0.1% Constant Voltage Driver (L3D0)
5.5 in (140 mm) W x 2.0 in (51 mm) H x 10.5 in (267 mm) L
50016452a
lutron.com
0784276 166027
120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Soft-on, Fade-to-Black
TM
EcoSystem
TM
3-wire Constant Voltage LED Driver
LED Driver 4RM5
L3D0-96W24V-U
Allumage doux, fondu au noir
EcoSystem
TM
Pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
Output | Sortie:
24 V 4 A Max Class 2
B2
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Hi-lume
®
Premier 0.1%
Suitable for damp locations.
Convient aux emplacements humides.
Use 20 - 12 AWG wire only.
Utiliser un fil de 0,50 - 2,5 mm² seulement.
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT :
Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Pats | Brevets: 7,911,156
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle: 8-32 x 3/8” roulage de filets, dentelées
1/4 in (6,5 mm)
Cu Al
1
by
Lutron

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 2 09.13.16
Specifications
Regulatory Approvals and Compliance
• Lutron® Quality Systems registered to ISO 9001.2008
• Manufacturing facilities employ ESD reduction
practices that comply with the requirements of
ANSI/ESD S20.20
• Meets ANSI C62.41 category A surge protection
standards up to and including 4 kV
• FCC Part 15 compliant for commercial applications at
120 V~ to 277 V~ and residential applications at 120 V~
• Meets UL® 8750/CSA C22.2 No. 250.13-14, “Light Emitting
Diode (LED) Equipment For Use in Lighting Products”
• NOM certified
•
Class 2 output; meets UL ® 1310/CSA C22.2 No. 223-M91
Performance
• Dimming Range: 100% to 0.1%
1
• LED lighting turns on to any dimmed level without
flashing to full brightness
• Operating Voltage: 120 V~ to 277 V~ at 50 / 60 Hz
• Rated lifetime of 50,000 hours at 40 °C (104 °F)
ambient temperature and maximum loading
• For rated warranty, ambient temperature (ta) not to
exceed 40 °C (104 °F) (maximum rated temperature)
2 , 3
• Patented thermal fold back protection
• Non-volatile memory restores all driver settings after
power failure
• Typical standby power consumption: 0.25 W at
120 V~ and 0.4 W at 277 V~
• Open-circuit protected output
• Short-circuit and overload-protected output
• Output: 24 V- constant voltage at high-end
• Output Load Range: 25 W to 96 W at high-end
• PWM dimming frequency: meets IEEE1789 at all
dim levels
• Power Factor: > 0.95 at maximum power
• Total Harmonic Distortion (THD): < 20% at
maximum power
Performance (continued)
• NEMA 410 – 2011 compliant
• Inrush Current Limiting Circuitry: decreases circuit
breaker tripping, switch arcing and relay failure; allows
full loading of switch leg
• Inrush Current: < 2 A
• Device turn-on time: < 100 ms from electronic off and,
< 500 ms from power off
• Meets all "Solid State Electrical Performance
Requirements" (Section 11) in Energy Star® for
Luminaires Version 2.0
• L3D0-96W24V-U driver is programmed by Lutron®
manufacturing and is NOT configurable by the Lutron®
QwikFigTM configuration system
Environmental
• Sound rated: Class A inaudible in 24 dBA ambient
• Relative Humidity: maximum 90% non-condensing
•
Minimum Operating Ambient Temperature: ta = 0 °C (32 °F)
3
• Indoor use only
• Rated for dry and damp locations
• Meets NEC® requirements for installation in “other
space used for environmental air”
4
• Meets the Canadian National Building Code Plenum
Requirements for a concealed space used as a
plenum within a floor or roof assembly
• Maximum heat output of module: 46 BTU/hour
1 Light output at 0.1% depends on installation and light engine efficacy.
2 To maintain warranty, installer is responsible for ensuring that the driver ambient temperature does not exceed 40 ºC (104 ºF).
3 Where ta is the temperature of the air directly surrounding the driver.
4 Additional considerations may be required based on state and local codes and standards.
2

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 3 09.13.16
Specifications
(continued)
Driver Wiring and Mounting
For best installation practices, please refer to
Application Note #591 at www.lutron.com.
• Mount the driver in a position where it can be easily
located and accessed if service or troubleshooting is
necessary.
• Driver is grounded by terminal connection
•
Terminal blocks on the driver accept solid or stranded
wire per terminal from 20 AWG to 12 AWG (0.50 mm
2
to
2.5 mm
2
).
• Maximum wire length between the LED driver and the
start of the linear strip for different wire sizes is listed
below. The table below can be used independently of
line voltage powering the LED Driver.
Wire Gauge Maximum Lead Length
24 AWG (0.20 mm2) 6 ft (1.8 m)
22 AWG (0.75 mm2) 10 ft (3.0 m)
20 AWG (0.50 mm2) 15 ft (4.5 m)
18 AWG (0.75 mm2) 25 ft (7.62 m)
16 AWG (1.0 mm2) 40 ft (12.2 m)
14 AWG (1.5 mm2) 60 ft (18.3 m)
12 AWG (2.5 mm2) 100 ft (30.5 m)
10 AWG (4.0 mm2)* 150 ft (45.7 m)
* To use wire gauge larger or smaller than terminal blocks’ rated gauge of
20 AWG to 12 AWG (0.50 mm2to 2.5 mm2), connect 1 ft (0.3 m) or less of
rated wire from terminal and connect with larger or smaller wire.
Terminal Block Details
LED
(-) LED
(+) EA1/
DA1 EA2/
DA2 LDH ND
3

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 4 09.13.16
Models Available
Model
Input
Voltage
(V~)
Input
Current1
(A)
Typical
Power
Factor1
Typical
THD1
(%)
Output
Power1
(W)
Output
Voltage1
(V-)
3-Wire or
EcoSystem®
Control
2
For 24 V-
Constant Voltage
LED Loads
L3D0-96W24V-U
120 0.92 0.99 7.5 25 – 96 24
2 7 7 0 .4 0 0 . 97 11 2 5 – 9 6 24
1 At maximum output power.
2 For wiring options, see Wiring section, pages 9-11.
NOTE: Specifications are subject to change without notice.
Power Factor vs. Output Power
THD vs. Output Power
Efficiency vs. Output Power
95% 30%
90%
85%
20%
80% 10%
75%
25
120 V~
120 V~
120 V~277 V~
277 V~
277 V~
25
2545
45
4565
65
6585
85
8596
96
96
1.0 0
0.95
0.90
0.85
0.80
0%
Output Power (W)
Output Power (W)
Power Factor Efficiency
THD
Output Power (W)
Output Voltage vs. Output Power
25.0
24.5
24.0
120 V~277 V~
25 45 65 85 96
23.0
Output Voltage (V)
Output Power (W)
23.5
4

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 5 09.13.16
50016452a
lutron.com
0784276 166027
120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Soft-on, Fade-to-Black
TM
EcoSystem
TM
3-wire Constant Voltage LED Driver
LED Driver 4RM5
L3D0-96W24V-U
Allumage doux, fondu au noir
EcoSystem
TM
Pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
Output | Sortie:
24 V 4 A Max Class 2
B2
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Hi-lume
®
Premier 0.1%
Suitable for damp locations.
Convient aux emplacements humides.
Use 20 - 12 AWG wire only.
Utiliser un fil de 0,50 - 2,5 mm² seulement.
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT :
Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Pats | Brevets: 7,911,156
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle: 8-32 x 3/8” roulage de filets, dentelées
1/4 in (6,5 mm)
Cu Al
Enclosure Dimensions
Measurements are shown as: in (mm)
Knockouts
• Sides
– 4 locations: 1/2 in or 21 mm trade size
• Top
– 2 locations: 1/2 in or 21 mm trade size
10.5 (267)
2.0 (51)
5.5 (140)
5

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 6 09.13.16
Mounting Options
1,2
1
Any other mounting configuration will require additional mechanical support. Improper installation may result in hazards to personnel or property.
2
Mount the driver in a position where it can be easily located and accessed if service or troubleshooting is necessary.
Mounting Surface
6

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 7 09.13.16
Barrier Installation and Driver Spacing Requirements
Measurements are shown as: in (mm)
• Optional barrier can be placed either
between the input and control terminals
(Option 1) when the EcoSystem® links are
wired as Class 2 or between the control
and output terminals (Option 2) when
EcoSystem® links are wired as Class 1.
• For 3-wire control, barrier could be placed in
either location.
• See Lutron® Application Note #142 at
www.lutron.com for more details regarding
wiring EcoSystem® as Class 1 or Class 2.
• Maintain a minimum of 3.0 in (76 mm) between
any two Hi-lume® Premier 0.1% drivers.
Option 1 Option 2
≥ 5.125 (130) 3.325 (86)
≥ 3.0 (76)
Barrier
≥ 3.0 (76)
Barrier Barrier
Output Control Input Output Control Input
Output Control Input
7

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 8 09.13.16
Control Mounting Options (continued)
A PowPak® Wireless Fixture Control can be mounted on the driver using the driver's available knockouts.
Additional considerations may be required based on state and local codes and standards.
Suitable for damp locations.
Convient aux emplacements humides.
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Pats. | Brevets: 7,911,156
L3D0-96W24V-U
4 A Max Class 2
Output | Sortie:
24 V-
0,92 - 0,40 A
Input | Entrée:
110 W Max50 / 60 Hz
120 - 277 V~
50016452a
lutron.com
Bouton de Réglage pour utilisation en chantier
Field Adjustment Knob
Use 20 - 12 AWG wire only.
Utiliser un fil 0,50 - 2,5 mm
2
seulement.
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
B2
LISTED
LED Driver 4RM5
Hi-lume ® Premier 0.1%
WARNING: Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT : Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle : 8-32 x 3/8” roulage de filets, dentelées
Cu
Al
1/4 in
(
6,5 mm
)
Soft-on, Fade-to-Black
™
EcoSystem
™
/ 3-wire Constant Voltage LED Driver
Allumage doux, fondu au noir
EcoSystem
™
pilote 3-fil tension constante pour DEL
1 The wireless fixture control will need to have its low-end level reprogrammed to dim to 0.1% output. For more detail on adjusting the low-end light level,
refer to Application Note #556 at www.lutron.com, call 1.877.346.5338 (U.S.A. and Canada only), or email [e-mail]
Hi-lume® Premier 0.1% Constant Voltage Driver
Model L3D0-96W24V-U
PowPak® Dimming Module
Model RMJ-ECO32-DV-B
OR
PowPak® Fixture Control
1
Model FCJ-ECO, FCJS-ECO
Pico® Wireless Control
Model PJ2-_B__-G
8

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 9 09.13.16
Wiring
L3D Models: 3-Wire Controls (third wire required for control signal)
Wiring Diagram
1 For the maximum wire length between the LED driver and the start of the linear strip, see charts in the Driver Wiring and Mounting section.
Compatible Controls without Soft-on, Fade-to-BlackTM dimming technology: Lutron® 3-Wire Controls4
Guaranteed performance specifications with the controls listed in the chart below.
For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 (U.S.A. and Canada
only) or [e-mail]
Product Model Number Drivers per Control
1
Load Type Low-end Trim
Setting
120 V~277 V~120 V~277 V~
Nova T*® dimmer N T F -1 0 - N T F -1 0 - 2 7 7- 1 –1 6 1 – 19 — —
N T F -1 0 3 P - N T F -10 3 P - 2 7 7- 1 – 8 1 – 14 — —
Nova® dimmer N F -10 - N F -10 - 27 7- 1 – 16 1 – 19 — —
N F -10 3 P - N F -10 3 P - 2 7 7- 1 – 8 1 – 14 — —
Skylark® dimmer S F -10 P - S F -12 P - 2 7 7- 1 – 8 1 – 14 — —
S F -1 0 3 P - S F -12 P - 2 7 7- 3 - 1 – 8 1 – 14 — —
Diva® dimmer D V F -10 3 P - D V F -10 3 P - 2 7 7- 1 – 8 1 – 14 — —
DVSCF-103P- DVSCF-103P-277- 1 – 8 1 – 14 — —
Ariadni® dimmer AY F -1 0 3 P - AY F -1 0 3 P - 2 7 7- 1 – 8 1 – 14 — —
Maestro® dimmer MAF-6AM- MAF-6AM-277- 1 – 6 1 – 14 — —
MSCF-6AM- MSCF-6AM-277- 1 – 6 1 – 14 — —
Maestro Wireless® dimmer MRF2-F6AN-DV- 1 – 6 1 – 14 — —
RadioRA® 2 dimmer R R D - F 6 A N - D V - 1 – 6 1 – 14 Dual voltage
3-wire dimmer 21% 3
HomeWorks® QS dimmer HQRD-F6AN-DV- 1 – 6 1 – 14 Fluorescent 3-wire
LED 3-wire 21% 3
Interfaces
2
PHPM-3F-120- — 1 – 16 – — —
PHPM-3F-DV- 1 – 16 1 – 3 8 — —
1 – 16 1 – 3 8 — —
BCI-0-10 1 – 16 1 – 38 — —
GP dimming panels V a r i o u s 1 – 16 1 – 3 8 2 -1 —
1 No derating required in multi-gang applications provided that the fixture-count does not exceed the quantity listed.
2 Please refer to interface specification sheet for compatible system list.
3 Trim level allows the ability to get to 0.1% but might result in dead travel for 1%—4% on user interface for some installations. In this instance, 22% trim level
could be used to avoid dead travel but might result in >0.1% dim level.
4 Soft-on, Fade-to-BlackT dimming technology is not available for 3-wire controls.
Note: For information about legacy products use in existing control application with this driver, contact [e-mail]
Lutron®
3-Wire
Dimmer/
Module/Panel Hi-lume®
Premier
0.1 % Constant
Voltage
LED Driver
LED
Light
Engine
Dimmed Hot (DH)
Line / Hot
LED +
1
LED –
1
Neutral (N)
Neutral
Neutral Ground
Ground
Switched Line / Hot (L)
To line
voltage
9

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 10 09.13.16
Wiring (continued)
L3D Models: EcoSystem® Digital Controls
1 For the maximum wire length between the LED driver and the start of the linear strip, see charts in the Driver Wiring and Mounting section.
Compatible Controls with Soft-on, Fade-to-BlackTM dimming technology: Lutron® EcoSystem® Digital Controls
Guaranteed performance specifications with the controls listed in the chart below.
For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 (U.S.A. and Canada
only) or [e-mail]
Product Model Number Recommended
System Version2Drivers per Control
120 V~277 V~
PowPak® Dimming Module with EcoSystem® RMJ-ECO32-DV-B
URMJ-ECO32-DVB 5.9 or higher 32 per EcoSystem® link
PowPak® Wireless Fixture Control with EcoSystem®1FCJ-ECO
FCJS-ECO 0796554 or higher 3 per EcoSystem® link
Energi Savr NodeTM unit with EcoSystem®
QSN-1ECO-S, QSN-2ECO-S
QSN-2ECO-PS120
UQSN-1ECO-S, UQSN-2ECO-S
9.027 or higher 64 per EcoSystem® link
GRAFIK Eye® QS unit with EcoSystem®QSGRJ-_E
QSGR-_E — 9.009 or higher 64 per EcoSystem® link
Quantum® Light Management Hub QP2-_P_C — 3.2 or higher
364 per EcoSystem® link
HomeWorks® QS with EcoSystem®
LQSE-2ECO-D
QSGRJ-_E
QSGR-_E
— 10 or higher464 per EcoSystem® link
1 All devices connected to one PowPakR Wireless Fixture Control will be controlled together. Devices will dim to the same level as the result of a control
command. The wireless fixture control will need to have its low-end level reprogrammed to dim to 0.1% output. For more detail on adjusting low-end light
level, refer to Application Note #556 at www.lutron.com.
2 For lower system versions, please visit www.lutron.com/LEDsystemcheck to check if your system requires changes.
3 Version 3.1 (or later) is required to dim lower than 1%.
4 Version 7.0 (or higher) is required to dim lower than 1%.
Hi-lume®
Premier
0.1 % Constant
Voltage
LED Driver
To EcoSystem® Digital Link
LED
Light
Engine
Line / Hot (L)
LED+
1
LED–
1
Neutral (N)
Ground
E1
E2
To line
voltage
10

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 11 09.13.16
Wiring
(continued)
Continuous LED Light Run
In a continuous LED light run, it is best to connect the load wires in the middle of the LED light run. Please consult
load manufacturer best practices for any additional consideration in load installation.
When connecting several LED light homeruns, ensure that the wire lengths and wattages match as closely as
possible for best performance.
Hi-lume® Premier
0.1 % Constant
Voltage LED Driver
LED
Light
Engines
LED +
LED –
Hi-lume® Premier
0.1 % Constant
Voltage LED Driver
LED +
LED –
LED +
LED –
LED +
LED –
LED
Light
Engine
LED
Light
Engine
LED
Light
Engine
11

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 12 09.13.16
EcoSystem® Wiring
EcoSystem® Digital Link Overview
• The EcoSystem® Digital Link wiring (E1 and E2)
connects the digital ballasts and drivers together to
form a lighting control system.
• Sensors do not connect directly to drivers. Sensors
are integrated through the EcoSystem® controller.
• E1 and E2 (EcoSystem® Digital Link wires) are
polarity-insensitive and can be wired in any topology.
• Power is supplied to the EcoSystem® Digital Link from
the control system.
• Protected from miswires of input power, up to
277 V~, to EcoSystem® control inputs.
EcoSystem® Digital Link Wiring
• EcoSystem® Digital Link terminals accept 20AWG
to 12AWG (0.50mm2 to 2.5mm2) solid or stranded
copper wire per terminal.
• Make sure that the supply breaker to the drivers and
EcoSystem® Digital Link Supply is OFF when wiring.
• E1 and E2 terminals of the drivers can be daisy
chained as shown to the right.
• Using two different colors for E1 and E2 will reduce
confusion when wiring several drivers together.
• The EcoSystem® Link may be wired Class 1 or
Class 2 (See Lutron® Application Note #142 at
www.lutron.com for more details). Consult applicable
electrical codes for proper wiring practices. Ensure
that the barrier placement is consistent with this wiring
choice.
• For emergency wiring, please refer to Lutron®
Application Note #106.
Notes
• The EcoSystem® Digital Link Supply does not have
to be located at the end of the Digital Link.
• EcoSystem® Digital Link length is limited by the wire
gauge used for E1 and E2 as follows:
Wire Gauge Digital Link Length (max)
12 AWG 2200 ft
14 AWG 1400 ft
16 AWG 900 ft
18 AWG 550 ft
20 AWG 352 ft
Wire Size Digital Link Length (max)
2.5 mm2828 m
1.5 mm2517 m
1.0 mm2310 m
0.75 mm2207 m
0.50 mm2155 m
E1
E2
12

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 13 09.13.16
Field Adjustment Knob
The Field Adjustment Knob is located on the side of the Hi-lume® Premier 0.1% Constant Voltage Driver (L3D0)
enclosure. This feature enables the customer to tune the lowest light output achieved during normal operation. An
example of this scenario is shown in the image below. Adjusting the Field Adjustment Knob of the lower light
output driver minimizes the light output difference and sets the low-end light level at 0.1%. This feature only needs
to be used in cases of mismatched loads that are separately controlled by 2 or more units.
The Field Adjustment Knob cannot fix light level mismatch among loads on the same driver. For example, two
homeruns of different wattage. For increasing the minimum light output of all the drivers in a space, please use
the control's low-end trim feature. Using the Field Adjustment Knob for this purpose will degrade On / Off transition
performance.
Figure 1: Cove Lighting with Mismatched Light Output at Low-End Due to Installation Variability
50016452a
lutron.com
0784276 166027
120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Soft-on, Fade-to-Black
TM
EcoSystem
TM
3-wire Constant Voltage LED Driver
LED Driver 4RM5
L3D0-96W24V-U
Allumage doux, fondu au noir
EcoSystem
TM
Pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
Output | Sortie:
24 V 4 A Max Class 2
B2
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Hi-lume
®
Premier 0.1%
Suitable for damp locations.
Convient aux emplacements humides.
Use 20 - 12 AWG wire only.
Utiliser un fil de 0,50 - 2,5 mm² seulement.
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT :
Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Pats | Brevets: 7,911,156
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle: 8-32 x 3/8” roulage de filets, dentelées
1/4 in (6,5 mm)
Cu Al
50016452a
lutron.com
0784276 166027
120 - 277 V 50 / 60 Hz 0,92 - 0,40 A 110 W Max
Soft-on, Fade-to-Black
TM
EcoSystem
TM
3-wire Constant Voltage LED Driver
LED Driver 4RM5
L3D0-96W24V-U
Allumage doux, fondu au noir
EcoSystem
TM
Pilote 3-fil tension constante pour DEL
USA / Canada: 1.844.LUTRON1 (1.844.588.7661)
Input | Entrée:
Output | Sortie:
24 V 4 A Max Class 2
B2
Warranty void if inner plastic cover is removed.
Garantie annulée si le couvercle plastique intérieur est ouvert.
Field Adjustment Knob
Bouton de Réglage pour utilisation en chantier
Hi-lume
®
Premier 0.1%
Suitable for damp locations.
Convient aux emplacements humides.
Use 20 - 12 AWG wire only.
Utiliser un fil de 0,50 - 2,5 mm² seulement.
WARNING:
Shock hazard. May result in serious injury or death.
Disconnect power before opening top lid, servicing or installing.
AVERTISSEMENT :
Danger d'électrocution. Peut causer de graves
lésions ou le décès de la personne. Couper l’alimentation du
disjoncteur avant de procéder à l’ouverture de couvercle supérieur,
au montage ou à l’entretien de l’installation.
Pats | Brevets: 7,911,156
Lid screws: 8-32 x 3/8” thread-rolling, serrated
Vis du couvercle: 8-32 x 3/8” roulage de filets, dentelées
1/4 in (6,5 mm)
Cu Al
25 W Load
0.1% dim level
96 W Load
< 0.1% dim level
Figure 2: Cove Lighting After the Use of the Field Adjustment Knob Eliminates Mismatch without Costly Re-wiring
25 W Load
0.1% dim level
96 W Load
0.1% dim level
Steps:
1. Set the control to low-end and turn all knobs fully
counter-clockwise
2. Identify the driver with the lowest light output
3. Turn the knob clockwise until the light output
matches the brightest driver
4. Repeat steps 2-3 until all drivers match in low-end
light output
13

52 Railroad Ave www.preciseled.com
Valley Stream, NY 11580 [email protected]
File Name: DRIV-LP-24V-96W SPEC A02 JAN. 5, 2020 Page
We reserve the right to change specifications without prior notice.
2020 PreciseLED
DRIV-LP-24V-96W Project Name:
Fixture Type:
Lutron LP Serise 24VDC, 5-96Watts 3-Wire/digital EcoSystem
120/277V 0.1% Dimming LED Driver
Hi-lume ® Premier 0.1% Constant Voltage Driver (L3D0)
®SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
LED Dimming Driver Architectural Dimming
369883c 14 09.13.16
Facilities Manager
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
Service
Driver Warranty
For warranty information, please visit
www.lutron.com/driverwarranty
Replacement Parts
When ordering Lutron® replacement parts, please
provide the full model number. Consult Lutron if you
have any questions.
Further Information
For further information, please visit us at
www.lutron.com or contact our LED Control Center of
Excellence at 1.877.346.5338 (U.S.A. and Canada
only) or [e-mail]
14