Luxul AGS-1008M User manual

Simply Connected
Quick Install Guide
AGS-1008M
8-Port Gigabit Switch
Use the AGS-1008M to:
 Expand Your Home or Offi ce Network with
8 Gigabit Ports
Deliver Ethernet Functionality in Remote or
Hard-to-Reach Locations
Future Proof Your Network with Gigabit
Speeds (10X Performance of Fast Ethernet)
Set-up a Dedicated Network for Optimizing
VoIP, Video, Security, or Gaming Applications.

2
AGS-1008M Quick Install Guide
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
Quick Install Guide
Model Number: AGS-1008M
8-Port Gigabit Switch
© 2015 Luxul. All Rights Reserved.
No part of this publication may be modified or adapted in any way, for any
purposes without permission in writing from Luxul. The material in this manual
is subject to change without notice. Luxul reserves the right to make changes to
any product to improve reliability, function, or design. No license is granted, either
expressly or by implication or otherwise under any Luxul intellectual property rights.
An implied license only exists for equipment, circuits and subsystems contained in
this or any Luxul product.
DOCUMENT CONVENTIONS
The following graphical alerts are used in this document to indicate notable situations:
NOTE: Tips, hints, or special requirements that you should take note of.
CAUTION: Care is required. Disregarding a caution can result in data
loss or equipment malfunction.
WARNING!: Indicates a condition or procedure that could result in
personal injury or equipment damage.
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CONTACT LUXUL
Sales
P: 801-822-5450
E: [email protected]
Technical Support
P: 801-822-5450
E: suppor[email protected]om

Simply Connected
3
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
PACKAGE CONTENTS
Please check the contents carefully after you open the packing:
One: 8-Port Gigabit Switch
One: Power Adapter
Four: Magnetic Mounting Kit
Four: Rubber Feet For Desktop Use
One: Quick Install Guide
If any of the listed items are missing or damaged, please contact the reseller from
whom you purchased the AGS-1008M for return/replacement.
HARDWARE DESCRIPTION
Front Panel and
The front panel of the AGS-1008M includes 8 Link/Activity LED’s and one power
LED. Please refer to the detailed description of these indicators in Section 1.4
below.
AGS-1008M Front Panel View

4
AGS-1008M Quick Install Guide
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
LED Indicators
The LED indicators of the AGS-1008M include 1 Power indicator and 8 Link/Activity
indicators. These LED indicators show the operating status of the AGS-1008M and
each switch connection.
The following chart shows the LED indicators of the AGS-1008M along with an
explanation of the indicator’s properties:
LED Color Status Description
Power Green ON This indicator lights up when the AGS-1008M is
powered
— OFF If this indicator is not lit, please check the DC power
supply to ensure proper connection to the outlet and
the AGS-1008M.
Link/
Activity
Green ON Indicates the AGS-1008M is connected at 1000Mbps.
Blinking Indicates the AGS-1008M is transmitting/receiving
data packets at 1000Mbps.
Orange ON Indicates the AGS-1008M is connected at 10/100Mbps.
Blinking Indicates the AGS-1008M is transmitting/receiving
data packets at 10/100Mbps.
— OFF Indicates the port is not connected to a device.
Rear Panel Layout
The Rear Panel of the AGS-1008M includes 8 10/100/1000Mbps RJ-45 Ethernet
ports and one DC power port used for DC power input.
AGS-1008M Rear Panel View
CAUTION: Please use the included power supply. If a different power
supply is used, it could damage the AGS-1008M

Simply Connected
5
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
PREPARING FOR INSTALLATION
System Requirements
Ethernet Cables to connect the AGS-1008M to Ethernet enabled devices
 Power should be 9V---1A.
Installation Requirements
Install the AGS-1008M in a stable/safe place to avoid any possible damage
Inspect the AC power cord to ensure that it is correctly connected and
undamaged.
To avoid electric shock, DO NOT open the AGS-1008M housing (no user service-
able parts inside). Opening the AGS-1008M will void your warranty.
It is recommended that the AGS-1008M is positioned away from direct sun light
Ensure there is sufficient space around the AGS-1008M for proper ventilation and
heat dissipation. It is recommended to have at least 4-6 inches around all sides.
Before Connecting to the Network
Before connecting the AGS-1008M to the network, please check the following:
 Determine placement location. Do not place any heavy articles on the
AGS-1008M.
 Ensure there is adequate space for proper heat dissipation and ventilation around
the AGS-1008M.
 Power socket should be within 4 feet of the AGS-1008M.
 Check power adapter to confirm safe and secure connection.
WARNING!: Placing the magnetic Feet on DVR, Hard Drive or any other
electronic device may cause damage.
Installing the Magnetic feet
Installing the Magnetic feet to the AGS-1008M

6
AGS-1008M Quick Install Guide
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the AGS-1008M
Installing the Rubber feet to the AGS-1008M
AGS-1008M INSTALLATION
Connecting Devices
Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the AGS-1008M to
a device as described below (CAT6 must be used in order to achieve full Gigabit
bandwidth). The AGS-1008M will automatically adjust to the characteristics
(speed/duplex) of the device to which it is connected.
Connecting the AGS-1008M to a Device
When a device is properly connected, the Link/Activity LEDs for each port lights
up green/orange. Please refer to the LED Indicators section for defi nitions and
troubleshooting.
Powering Devices
When you want the device powered by PoE connect the AGS-1008M to another
switch through the PoE In port. When you want the AGS-1008M to be powered by
AC, plug the AC power adapter into a wall outlet and into the Port on the Device.

Simply Connected
7
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
PoE Powered
AC Powered
Connecting to a Router or Other Switch
XBR-2300
Enterprise Dual-WAN Router
POWER
100M
RESET
SYS
1 2 1 2 3
LANWAN
LAN
WAN
12123
Internet
Connecting the AGS-1008M to a Router or Switch
When a device is properly connected, the Link/Activity LEDs for each port light
up green/orange. Please refer to the LED Indicators section for defi nitions and
troubleshooting.

LUX-QIG-AGS-1008M
029151017 v1
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
p: 801-822-5450 | f: 801-822-5460
Information on this document supersedes all previous versions.
Products and documents subject to change without notice.
Products may be discontinued without notice.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that
this Luxul AGS-1008M is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For a copy of this report send a self addressed stamped envelope to:
Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.
Industry Canada
CAN ICES-3(B)/NMB-3(B)