Madison Park 267517 User manual

Parts Name Qty
Left side footrest 1
Right side footrest 1
Front leg frame 1
Back leg frame 1
Seat 1
PARTS NAME QTY
Bolts
φ5/16*2-3/8"
9
Lock Washers
φ5/16"
9
Flat Washers
φ5/16"
9
Allen Wrench
φ5/16"
1
Screw 6
Screwdriver Not provided
Step 2: Insert Front leg frame (P3) to the seat frame (P5), Lock the front legs to the seat frame using Allen
Wrench (H4) to loosely tighten bolt (H1), lock washer (H2), flat washers (H3) as illustration below.
Step 3: Insert P1 and P2 to the front leg frame(P3),lock the footrest to the front legs, loosely tighten the screw
(H5) with the screw driver (H6) as illustration below.
H6
Step 1.Take out the leg frames , footrest and hardware from the box.
H1
H2
H3
H4
H5
P4
P5
Hardware#
DRAWING
Assembly Instruction---Counterstool
Parts# Drawing
P1
P2
P3
P1

Step 4: Attach Step 3 finished part to back leg frame (P4) as shown in below illustration.
Step 5: Lock the seat (P5) to the back frame (P4) using Allen Wrench (H4) to loosely tighten bolt (H1), lock
washer (H2), flat washers (H3) as below illustration. Loosely tighten the screw (H5) with the screw driver (H6)
to lock P1 and P2 to the back legs (P4) as illustration below.
Step 6: Securely tighten all bolts with Allen Wrench and all screws with screw driver before turning the chair
over and palce it upright on a level surface. Assembly is complet.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY
SHOULD BE PERIODICALLY INSPECTED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO BE
SURE THAT ALL HARDWARE IS KEPT TIGHTENED.
P1