Madison Park Koy Coffee Table User manual

Pre-assembly:
emove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Importantsafety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
H2
H3
H1
H4
H2
H4
H1
H3
H5

Step 2. Loosely attach the bottom frame (P2) to the legs (P3) using countersunk bolts (H5) as shown below.
ADDITIONAL NOTE ABOUT SAFETY:BOLTS MAY LOOSENDURINGNORMAL EVERYDAY USE. THEY SHOULDBE
PERIODICALLY INSPECTEDAND RE-TIGHTENEDTOPREVENT DAMAGE ORINJURY. ALWAYS CHECK TOBE SURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 3.
1) Turn the assembled table to an upright position. Make sure the table is level and securely tighten all the bolts
with Allen wrench (H4).
2) Leveler adjustment: Leveler are installed on the legs and adjust as needed to make sure the table is
level. Assembly is complete. Failuretofollowtheseinstructionsmaycausetheboltsto misalign
duringassembly.
H5
H4
(H5)x8