Madison Park Emmett Swivel User manual

Important safety instructions：
• Please read carefully all instructions before assembling.
• For your safety and ease，assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
• Remove all parts and hardware from box along with any protective packaing
Parts List Hardware List
ASSEMBLY INSTRUCTIONS
Emmett Swivel counter stool
• Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware.
Step 1. Assemble the chair on a flat
,
soft surface
such as carpet or cloth to prevent scratching. Insert
legs (P7&P8) to the crossing seat frame(P3), lock the
legs to the seat frame using allen wrench(H8)to
loosely tighten bolts (H1), lock washers (H2), flat
washers(H3) as illustration below.
Step 2. Insert footrest (P4,P5&P6) to the legs
(P7&P8), lock the footrest to the legs with screws(H7)
and tighten all screws securely with screw driver(H9)
as illustration below

Change this as nessary
Page 1 of 1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD
BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO
ENSURE THAT ALL HARDWARE IS KEPT TIGHTENED.
Thank you for your purchase
Step 3. Turn the whole leg frame, upright on the
surface tighten all bolts securely with allen wrench.
Step 4. Attach the swivel (P2) to the leg frame with
bolts(H4) and flat washes(H6), tighten all bolts
securely with allen wrench(H8) .
Step 5. Lay chair on its side and then attach the
swivel(P2) to the bottom of chair seat (P1) with
bolts(H5), flat washes(H6) and tighten all bolts
securely with allen wrench (H8)
Step 6. Turn chair upright on a level surface. Adjust
levelers (as drawing) as necessary.