Madison Park Dillinger End Table User manual

H1
H2
Pre-assembly:
Takeoutall partsandhardwaresfrombox.
Donotdiscardanycontent untilassemblycompleted toavoidaccidentallydiscarding small partsor hardware.
Importantsafetyinstructions:
Pleasereadcarefullyallinstructionsbefore assembling.
For your safetyand ease,assemblybytwoor moreadultsisrecommended.
Keep instructionsforfuture use.
Image1
H3
(H1)x2
(H2)x4
(H4)x6
(H3)x6
H4
H5
(H5)x1

Step 3.
a) Attachthe other metalsideframe (P2) tothe tabletop(P1)and metalrail(P3)asshownbelowimage 3.
b)SecurelytightenallboltswithAllen wrench(H5), makesurethetableisleveledandalignedproperly. Turn the
assembled tabletoan upright position. Assemblyiscomplete.Failuretofollow theseinstructionsmay cause
thebolts tomisalign duringassembly.
ADDITIONAL NOTEABOUT SAFETY:BOLTSMAYLOOSENDURINGNORMALEVERYDAYUSE. THEY SHOULDBE
PERIODICALLYINSPECTEDAND RE-TIGHTENEDTOPREVENT DAMAGEORINJURY. ALWAYS CHECK TOENSURETHATALL
HARDWAREISKEPTTIGHTENED.
Step 2. Attachthe metalrails(P3)tothe metalsideframe (P2)asshownon belowimage 2.
(H1)x2
(H4)x2
(H3)x2
(H5)x1
(H1)x4
(H2)x4
(H4)x8
(H3)x8
(H5)x1
Image2
Image3