Madison Park SAN PEDRO ACCENT CHAIR User manual

Page 1 of 3
Description QTY
Parts List
Item
Step 1. Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Hardware List
QTY
Description
Item
Pre-assembly:
Take out all parts and hardware from box.
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
ASSEMBLY INSTRUCTIONS
Description: E&E - SAN PEDRO ACCENT CHAIR
Assembly Procedures:
P2 FRONT LEG
LEFT 1
P4 BACK LEGS 2
H1
H2
H3
H5
H6
ALLEN KEY 4 MM
BOLT M6 X 60 MM
LOCK WASHER 6 X 11 X 2
WOODEN PLUG
FLAT WASHER 6 X 13 X 1
1
4
12
12
4
Legs and
hardware
package
P1 REST + SEAT
+ CUSHION 1
H4
BOLT M6 X 40 MM 8
Disclaimer: When properly assembled, this item is safe for intended use. Seller is not liable
for any damages resulng from item being improperly assembled aer purchase
P3 FRONT LEG
RIGHT 1

P1
P4
P4
H1
(H1) x 1
(H3) x 4
(H4) x 4
(H5) x 4
ALLEN KEY 4 MM
BOLT M6 X 40 MM
LOCK WASHER 6 X 11 X 2
FLAT WASHER 6 X 13 X 1
Step 2: Attach Back legs (P4) to Chair top (P1) using Allen key (H1), Lock washer (H4), Flat washers (H5), and
40 MM Bolt (H3).
(H1) x 1
(H2) x 4
(H4) x 8
(H5) x 8
ALLEN KEY 4 MM
BOLT M6 X 60 MM
LOCK WASHER 6 X 11 X 2
FLAT WASHER 6 X 13 X 1
Step 3 : Attach the Front leg left (P2) and Front leg right (P3) to Chair top (P1) using Allen key (H1), Lock
washer (H4), Flat washers (H5), 60 MM Bolt (H2), and 40 MM Bolt (H3), then cover the arm hole with wooden
(H3) x 4 BOLT M6 X 40 MM
(H6) x 4 WOODEN PLUG
H1
H2
H5
H4
H2
H1
H4
H5
H3 H4
H3 H4
H6
H6
H5
H5
P1
P2
P3
H3
H4
H5
H3
H4
H5
ASSEMBLY INSTRUCTIONS
Description: E&E - SAN PEDRO ACCENT CHAIR
Page 2 of 3
plug (H6) as shown below.

Step 4: Turn the assembled chair to an upright position. Assembly is complete.
ASSEMBLY INSTRUCTIONS
Description: E&E - SAN PEDRO ACCENT CHAIR
Page 3 of 3
Thank you for your purchase
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.