Mag-lite ML150LR User manual

LED Rechargeable Flashlight System
Système de Torche Rechargeable LED
Sistema de linterna LED recargable
Owner’s Manual • Guide d’Utilisation • Manual del Propietario

For Your Safety Please Read
Re d ll s fety instructions in this m nu l before ttempting to use the
ML150LR™/ML150LRS™ LED Rech rge ble Fl shlight System. Keep
this m nu l for future reference. It cont ins import nt inform tion
bout s fe oper tion nd m inten nce of the product.
SAFETY INSTRUCTIONS:
The s fety instructions in this m nu l h ve been cl ssified ccording to
the seriousness of the risk, s follows:

WARNING:
“W rning” indic tes h z rdous situ tion th t, if not voided, could
result in de th or serious injury.
O
CAUTION:
“C ution” indic tes h z rdous situ tion th t, if not voided, could
result in minor or moder te injury.
몇
NOTICE:
“Notice” indic tes inform tion considered import nt th t rel tes to
voiding risk of d m ge to the fl shlight or fl shlight system itself
nd/or to other property.

WARNINGS:
• The ML150LR™/ML150LRS™ fl shlight is high-intensity lighting
device th t is s fe during norm l oper ting use in which it is used to
project light t dist nce nd the lens is not obstructed or blocked. It is
not intended for use in h z rdous environments, such s explosive
environments, where only devices with ppropri te h z rdous
certific tions (such s “intrinsic lly s fe” nd/or “explosion-proof”)
should be used. If the device is left on when the lens is obstructed or
blocked, such misuse m y cre te potenti lly d ngerous he t build-up,
which could possibly result in fire, depending upon the environment in
which the device is being misused.
• This fl shlight is high-intensity lighting device c p ble of c using
eye d m ge to the user or others. Avoid shining the fl shlight directly
into nyone’s eyes.
• As is the c se with ny b ttery, never llow it to short circuit nd do
not expose the b ttery of this device to fire or excessive he t, s this
could c use the b ttery to le k, rupture or explode.
• The ch rging cr dle is not w terproof nd should only be used in dry
indoor loc tions. Exposing the device’s ch rging system to liquids could
c use shorting nd possible fire nd/or electric shock.
• Never try to dis ssemble, rep ir or lter the AC d pter, plug or
ch rging cr dle. Shorting nd possible fire nd/or electric shock could
result. Cont ct M g Authorized W rr nty Service Center for rep irs.
O
CAUTION:
• The fl shlight is not designed to oper te with the f ce c p off nd the
LED exposed. If cont cted directly, the exposed LED could become hot
enough to burn skin, or to melt or scorch some he t-sensitive m teri ls,
e.g., pl stics, rubber, cloth f brics, etc.
• Any b ttery m y le k h rmful chemic ls which m y d m ge eyes,
skin, clothing, or the inside of the fl shlight. To void risk of injury,
never dis ssemble b ttery p ck, nd do not let ny m teri l le ked
from b ttery come in cont ct with eyes or skin. In the event of
cont ct with eyes or skin, w sh the ffected re immedi tely nd
obt in prompt medic l ttention.
몇
NOTICE:
To reduce the risk of h rm to your fl shlight:
• Loc te power cord w y from foot tr ffic nd other c uses of br sion
or stress.
• Never pull on the power cord when unplugging the AC d pter. Gr sp
the plug directly.

• Do not use non-rech rge ble b tteries in your Rech rge ble Fl shlight
System. Use only MAG® rech rge ble b ttery p ck (ML150LR™
Model No. 485-000-034), (ML150LRS™ Model No. 485-000-075).
• For prolonged stor ge, remove the b ttery p ck nd store it sep r tely
in non-conductive wr pping, such s pl stic b g.
• C refully follow steps listed under “Inspection nd M inten nce” in
this m nu l.
• Alw ys use genuine ML150LR™/ML150LRS™ repl cement p rts nd
ccessories. Never connect the fl shlight to ny uxili ry product th t
h s not been pproved by M g Instrument, Inc. Doing so m y d m ge
the product nd void your w rr nty.
• Discontinue use immedi tely if you notice ch nges in the b ttery such
s swelling, discolor tion or le k ge.
• Rech rge the B ttery t temper tures between 32°F nd 140°F (0°C to
60°C), s ch rging outside this r nge c n potenti lly reduce b ttery
c p city.
PROTECTION OF CHILDREN
• This product is not toy, nd is not intended or recommended for use
by children.
• Keep the fl shlight, ll ccessories nd components out of the re ch of
sm ll children – especi lly sm ll p rts th t might present choking
h z rd to children.
BATTERY DISPOSAL
• Cover the met l termin ls with insul ting t pe before dispos l, to
prevent ccident l short-circuiting.
• Never dispose of b ttery p ck by throwing it into fire. B ttery
explosion could result.
• Never disc rd used b ttery p ck with ordin ry solid w stes, since it
cont ins toxic subst nces.
• The se led Lithium Iron Phosph te (LiFePO4) b ttery stick supplied
with your fl shlight must be recycled or disposed of properly. Cont ct
your loc l solid w ste uthority for proper recycling or dispos l
inform tion.
www.maglite.com
M g Instrument, Inc. is proud p rticip nt in the RBRC (Rech rge ble B ttery
Recycling Corpor tion). By recycling LiFePO4rech rge ble
b tteries, you re helping to keep LiFePO4b tteries out of the
solid w ste stre m. When you throw w y LiFePO4b ttery,
it eventu lly ends up in l ndfill or municip l inciner tor. By
recycling your used LiFePO4b tteries through M g
Instrument’s B ttery Recycling Progr m, you re helping to
cre te cle ner nd s fer environment for gener tions to come.
For more inform tion bout the RBRC visit www.rbrc.com

Getting Started
T king few moments to re d this m nu l nd f mili rizing yourself with the
ML150LR™/ML150LRS™ LED Rech rge ble Fl shlight System will help to insure ye rs of superior
service nd s tisf ction.
Mag Instrument is a Founding Partner
of the National Law Enforcement Officers
Memorial Fund and The National Law
Enforcement Museum.
Le rn more bout The C mp ign for the
N tion l L w Enforcement Museum t
www.m glite.com
S
1. Fl shlight
2. Ch rging Cr dle
3. Rech rge ble B ttery (LiFePO4)
4. 120 Volt Converter (US)
5. 12 Volt Ad pter (Automobile)
6. 230 Volt Converter (Euro)
7. 240 Volt Converter (UK)
8. 12 Volt Str ight Wire
(Automobile)
4
Contents
Getting St rted. . . . . . . . . . . . . . . . . . . . . 4
The Fl shlight. . . . . . . . . . . . . . . . . . . . . . 5
The Ch rging Cr dle. . . . . . . . . . . . . . . . . 6
Inst ll tion . . . . . . . . . . . . . . . . . . . . . . . . . 7
B ttery/B ttery Ch rging . . . . . . . . . . . . . 8
Oper tion - Getting the Most out o
Your ML150LR™/ML150LRS™ LED
Rechargeable Flashlight System . . . . . . . 10
Frequently Asked Questions. . . . . . . . . 11
Troubleshooting, Specific tions . . . . . . 12
Inspection nd M inten nce . . . . . . . . . 12
W rr nty . . . . . . . . . . . . . . . . . . . . . . . . . 13
Français . . . . . . . . . . . . . . . . . . . . 14
Español . . . . . . . . . . . . . . . . . . . . 26
LED Rechargeable Flashlight System
Système de Torche Rechargeable LED
Sistema de Linterna Recargable LED
Not ll of the following 8 items re included with every Rech rge ble Fl shlight System shipped, s some
p ck ge contents m y v ry. To confirm which of the 8 items re included with your System, consult the
p ck ge in which the System w s sold.
This m nu l covers both ML150LR™ & ML150LRS™ fl shlights. Im ges shown re the ML150LR™.
8
67
5
2
1
34

Section 1 The Flashlight
5
23
4
15
1. Face Cap - The remov ble f ce c p, which is thre ded onto the
he d, is O-ring se led nd ret ins the polyc rbon te lens nd the
precision-engineered reflector th t is the he rt of the optic l system.
2. Head - The he d houses the reflector nd
the LED module. The fl shlight’s Quick-Adjust ble
Be m oper tes by rot ting the he d. About ¼ turn
of the he d c uses the be m to v ry between
wide floodlight setting nd n rrow spotlight
setting (Fig. 1). To remove the he d, first remove
the f ce c p nd reflector; the he d is then free to
slide down the b rrel. This m neuver provides
ccess to the O-ring se l th t is se ted in groove
on the outside of the b rrel, ne r the he d end,
nd se ls the he d-b rrel ssembly g inst grit
nd moisture.
3. Switch - Se led, flush-with-the-b rrel electronic switch provides
ccess to five different functions – Full Power, Low Power, Strobe
(12x/sec), Eco, nd Moment ry On/Off.
4. Serial Number - Your fl shlight’s unique seri l number is
perm nently engr ved on the b rrel for e se of identific tion nd
registr tion. Ple se note your seri l number for future
reference:____________________.
5. Tail Cap - The t il c p is thre ded onto the b rrel nd ret ins the
Lithium Iron Phosph te (LiFePO4) rech rge ble b ttery. The t il c p/b rrel
junction is se led by lip se l th t prevents entry of moisture nd grit,
while llowing the venting of ny g s th t m y be gener ted within the
fl shlight. The t il c p c n be removed to inspect/repl ce the b ttery nd
to m int in/repl ce the lip se l.
Fig. 1

Section 2 The Charging Cradle S
6
To remove the fl shlight from the ch rging cr dle: Gr sp the fl shlight, press
the quick-rele se button (Fig. 4A) nd lift up (Fig. 4B).
To return the fl shlight to the ch rging cr dle: Pl ce the front end of the light
into the front end of Ch rging Cr dle, lower the fl shlight until it clicks into
pl ce (Fig. 5).
Once it is mounted to w ll or in vehicle, you’ll find th t the technique for
removing nd returning the fl shlight to the Ch rging Cr dle works with
one motion.
The quick-rele se button requires very little force to remove nd return the
fl shlight to the ch rging cr dle.
Constructed of engineering gr de thermopl stics, this Ch rging Cr dle unit h s m ny
fe tures. Input c n be from 12–14 volts ( utomotive inst ll tions) or 120-240 volts AC,
when used with converter for ch rging indoors.
Fig. 3 Flashlight in the Charging Cradle
LED Ch rging Indic tor
(Green/Red/Orange)
Quick-Rele se Button
Fig. 5
Fig. 4B
Fig. 4A

S Section 3
7
Installation
Fig. 7
Ground (–) le d
(bl ck)
Positive (+) le d
(red)
Ignition-Switched Fuses
Ch rging Cr dle Cord
R dio
He ter
Accessory
Note: For m ximum protection of ch rging cr dle nd
vehicle, it is recommended th t 10 AMP
Slow Blow fuse is inst lled in the Positive (+) le d (red).
Ch rging Cr dle
Direct Wire–Vehicle Installation 12–14 Volt Only (Not for 24-Volt Systems)
A 6’ power ccessory cord is v il ble to f cilit te the direct-wiring of the rech rge ble system (Fig. 7). MAG Instrument recommends
using n ignition-switched circuit (fused for 10 or 15 AMPS). This is most often the r dio or ccessory fuse. The Positive (+) le d (red) is
connected to the fuse output, nd the Ground (-) le d (bl ck) wire should be tt ched to met l p rt of the ch ssis, which serves s
b ttery ground return.
10 AMP
(See Note)
A Typical Installation
1. Loc te nd mount the cr dle using ppropri te screws nd nchors for
the loc tion nd m teri l.
2. Att ch end of DC power cord or AC converter to ch rging cr dle by
inserting round plug into power connection port in the side of the
ch rging cr dle (Fig. 6, 7 & 10).
몇
NOTICE: Never pull on the power cord when unplugging the AC d pter.
Gr sp the plug directly.
OCAUTION: M ke sure c ble c nnot be pinched. If c ble is pinched it c n
c use immedi te short nd wires c n get hot, melt pl stic, nd cre te
fire h z rd.
Fig. 6
Power connection port

Section 4 S
The Battery
8
Your Battery’s First Charge Is Important!
To ssure the freshness of your b ttery nd to void ny oper tion l
problems in shipping, it h s been p ck ged in n UNCHARGED st te.
For optimum oper tion of your fl shlight, it should be ch rged full
6 hours … before using for the first time.
Battery Installation
If the battery was shipped outside of the flashlight: After you h ve removed
the fl shlight from the Ch rging Cr dle unscrew the t il c p (Fig. 8) nd insert
b ttery p ck (Fig. 9) into the b rrel. The positive (+) end—this is the end with
button—goes into the b rrel first. Now screw on the t il c p nd m ke sure it’s tight.
NOTE: L rge end of the b ttery spring must be sn pped into the t ilc p.
First Charge Procedure
1. Connect ch rging cr dle to the AC converter or DC ccessory cord
(Fig. 10).
2. Plug into w ll recept cle (AC) or DC power source cord.
3. M ke sure ch rging cr dle indic tor LED is GREEN (see next p ge for
expl n tion of LED indic tor colors).
4. M ke sure fl shlight t ilc p is tight.
5. Pl ce fl shlight into ch rging cr dle.
WARNING:
As is the c se with ny b ttery, never llow it to short circuit
nd do not expose the b ttery of this device to fire or excessive he t, s
this could c use the b ttery to le k, rupture or explode.
몇NOTICE:
For prolonged stor ge, remove the b ttery p ck nd store it
sep r tely in non-conductive wr pping, such s pl stic b g. Cover the
met l termin ls with insul ting t pe before dispos l, to prevent ccident l
short-circuiting.
Tailcap
Battery Spring
Flashlight Barrel
Fig. 8
Fig. 9
+
–
Fig. 10

S Section 4 Battery Charging
9
After the first (6-hour) ch rge, the tot l time to fully ch rge fully
disch rged b ttery is pproxim tely (ML150LR™-2.5 hours)
(ML150LRS™-1.5 hours).
The ch rging cr dle is provided with n LED th t indic tes
b ttery ch rge st tus by blinking nd ch nging color (Fig. 11), s
seen in the ccomp nying ch rt.
Charger Mode Definitions:
• Charging: B ttery ch rge level is below 80% nd will f st
ch rge for up to 6 hours (m ximum ch rge time for deeply
disch rged b ttery). Typic l ch rge time is (ML150LR™-2.5 hours)
(ML150LRS™-1.5 hours).
• Top Off/Maintenance: B ttery ch rge level is t (or bove) 80%
nd will be slow ch rged to top off
• Idle: B ttery ch rge level is t 100% nd ch rging h s stopped or
there is no light in the cr dle
• Fault: Ch rger input/output Volt ge is below the minimum
threshold for norm l oper tion, short-circuit is detected, or
component f ilure h s occurred.
ML150LR™/ML150LRS™ - CHARGING CRADLE FUNCTIONS
B ttery St te Ch rger Mode LED Indic tor
0 - 80% Ch rging Or nge
> 80% Top Off/M inten nce Blinking Green
100% - No Light Idle Green
Unknown F ult Blinking Red
Fig. 11
LED indic tor

Section 5
10
S
Operation - Getting the most out of Your ML150LR™/ML150LRS™LED Rechargeable Flashlight System
Switch Operation
Your Flashlight’s Function Sets and the Functions
Within Each Set
The ML150LR™/ML150LRS™ LED fl shlight includes powerful new
electronics, providing five different functions to choose from. Bec use
not ll functions re equ lly import nt to ll users, the ML150LR™/
ML150LRS™ LED fl shlight offers n rr y of USER-CONFIGURABLE
FUNCTION SETS th t LET YOU PERSONALIZE the settings for QUICKEST
ACCESS to the FUNCTIONS YOU USE MOST. The four v il ble
Function Sets re shown in the below Function Sets Ch rt.
The five different functions re: – Full Power, Low Power, Strobe (fl shes 12
times per second), Eco nd Moment ry On/Off (st ys on only while the switch
button is held down). Not ll of these functions re equ lly import nt to every
user. Th t is why these functions re org nized into four different function sets
– so th t you c n person lize your fl shlight to suit your needs, configuring it
for quickest ccess to the functions th t best m tch your preference.
How To Choose A Function Within a Set - “Quick Click”
The v il ble function sets, nd the functions within e ch one, re shown in
the Function Sets Ch rt.
As it comes out of the p ck ge, your ML150LR™/ML150LRS™ LED fl shlight
is set to the “Gener l (Def ult)” function set (Function Set #1 in the ch rt). If you
require only those three functions (Full Power, Low Power nd Eco), then you
never h ve to ch nge it. You c n select function within th t set by the “Quick
Click” method: Turn the fl shlight on with one Quick Click nd it is on t Full
Power. Turn it off, then turn it on with two Quick Clicks ( bout s f st s you
would s y “Click Click”) nd it turns on t the Low Power function. Turn it off,
then turn it on with three Quick Clicks ( bout s f st s you would s y “Click
Click Click”) nd you h ve the Eco function.
Selecting function within ny of the other function sets works the s me w y
– st rting with the fl shlight off, invoke the desired function by pplying 1, 2 or
3 “Quick Clicks”, s the ch rt shows. For ex mple, if you re in “Outdoor”
function set (Function Set #2) nd you w nt to select the Strobe function, begin
with the fl shlight off, pply three Quick Clicks, nd your fl shlight will strobe.
How To Go From One Function Set To Another
Your ML150LR™/ML150LRS™ LED fl shlight’s “Gener l (Def ult)” setting is Function Set
#1. If you w nt to keep th t setting you don’t h ve to do nything. Function Set #1 will
lw ys be in effect unless it is ch nged. If you w nt to choose different function set,
follow these steps:
1 GENERAL 2
OUTDOOR 3
LAW
ENFORCEMENT
4 TACTICAL
(Default)
Function Set
Full Power
Low Power
Eco
Full Power
Low Power
Strobe
Momentary
Full Power
Eco
Momentary
Full Power
Strobe
Function Sets Chart

S
11
Section 5 Operation -
Getting the most out of Your ML150LR™/ML150LRS™LED Rechargeable Flashlight System
METHOD 1
1. Unscrew the t il c p, b cking it out of the
b rrel f r enough th t the fl shlight will not
turn on. (Note: This m y require the t ilc p to
be removed from the b rrel entirely).
2. P use for 2 seconds.
3. Press the switch button nd keep holding it down.
4. While still holding down the switch button, screw
the t il c p b ck in until it is tight.
5. Keep holding down the switch button. Within
bout 4 seconds the fl shlight will st rt to blink.
6. The number of blinks indic tes the new selected Function Set.
7. To choose new Function Set, rele se the switch button fter the corresponding
number of blinks (rele sing fter 1 blink chooses Function Set #1; rele sing fter 2 blinks
chooses Function Set #2; rele se fter 3 blinks for Function Set #3, nd rele se fter 4 blinks
to choose Function Set # .) Your choice of Function Set rem ins in effect until you
ch nge it by repe ting the bove process. (See our Demo video t www.m glite.com)
METHOD 2 - STEP 1
• Click the light into HIGH mode nd hold the button down for five seconds.
NOTE: If the light is currently configured for Function Set 1 or 2, then the user
will begin from the OFF mode, click once nd hold.
If the light is currently configured for Function Set 3 or 4, then the user will begin
from OFF mode, click twice nd hold.
• After five seconds, the light will turn off for .25 seconds nd then b ck on g in
indic ting th t the light is now unlocked. The Function Set c n be ch nged t
turn-off nd without loosening the t il c p (tr dition l method).
• Rele se the button t ny time.
STEP 2
• Click nd hold the button down for five seconds.
• After five seconds the light will turn OFF, continue holding the button.
• After three seconds the light will begin to blink in successive p tterns which
represent p rticul r Function Set, from this point everything is the s me s the
tr dition l method.
NOTE: One blink, is Function Set 1 (GENERAL), rele se the button to s ve this
set into memory.
Two blinks, Function Set 2 (OUTDOOR), rele se the button to s ve this set into
memory.
Three blinks, Function Set 3 (LAW ENFORCEMENT), rele se the button to s ve
this set into memory.
Four blinks, Function Set 4 (TACTICAL), rele se the button to s ve this set into
memory.
몇NOTICE: To void deeply disch rging the rech rge ble LiFePO4b ttery, lw ys
turn the fl shlight off when the fl shlight be m st rts to dim. A dim be m is n
indic tion th t the b ttery needs to be rech rged.
Spot-to-Flood Beam
The quick focusing spot-to-flood be m oper tes with simple qu rter turn of the
fl shlight he d ssembly.
Frequently Asked Questions
Q. How long can I leave the flashlight in the Charging Cradle (on charge)
without using?
A. Indefinitely. Your ch rging cr dle is suit ble for perm nent stow ge of the fl shlight.
Bec use the cr dle utom tic lly shuts off when it detects th t the fl shlight h s t ken
full ch rge, you don’t ever h ve to worry bout overch rging the fl shlight. If the
fl shlight sits idle in the cr dle for long enough time to lose little of its ch rge, the
cr dle detects th t, too, nd pplies “top off/m inten nce” ch rge. But g in, it will
stop ch rging when the ch rge is b ck up to 100%. The cr dle will never overch rge
the fl shlight.
Q. If dust occurs inside my reflector, how do I clean it without damage to the
reflector?
A. Do not touch reflector. Use c mel h ir brush lightly or blow with compressed ir
duster s used on computers nd electronics. Use the s me c re th t you would give
precision c mer lens.
Q. How do I get a fingerprint off my reflector?
A. Use c mer lens cle ner nd lint-free cloth.

Section 6 S
12
Troubleshooting Specifications and Accessories
If you h ve questions or need ssist nce, ple se c ll our w rr nty/rep ir
f cility t [phone], in the U.S.A. only, or [phone] outside the U.S.A.
Problem Cause/Correction
1. M ke sure b ttery is inst lled, with positive (+) end tow rd he d
of fl shlight.
2. M ke sure l rge end of b ttery spring is sn pped into t ilc p.
3. Tighten t il c p – m ke sure unpl ted re of t il c p nd b rrel
re cle n. See fig. 12
1. Check b ttery ch rge: Pl ce fl shlight in rech rger/cr dle. M ke
sure LED lights up (see p ge 8). Ch rge for 15 minutes … check
for light. If it lights (even moment rily) ch rge it, if not, repl ce it
(b ttery).
1. Return fl shlight to M g Instrument (see w rr nty).
1. Check for d m ge to b ttery c sing.
2. Foreign p rticles inside b rrel.
1. D m ged LED.
1. Tighten t il c p.
2. Check plug connection to
converter.
3. Check plug to power
source.
4. M ke sure l rge end of
b ttery spring is
sn pped into t ilc p.
Inspection and Maintenance
B ttery P ck – See W rnings Section for more inform tion. Periodic lly
( pproxim tely every month) remove the b ttery p ck from the fl shlight nd
visu lly inspect for signs of g s or chemic l le k ge. Indic tions of le k ge re
discolor tion of the pl stic sleeve or white fuzzy m teri l ne r the top (positive
button) of e ch cell. Another indic tion would be bulging deform tion of the
bottom (neg tive fl t end) of the cell c n. If these signs re observed the b ttery p ck
should be removed from service to prevent chemic l d m ge to the inside of the
fl shlight. See One Ye r B ttery P ck W rr nty for more inform tion concerning
w rr nty cover ge.
Fully Ch rged B ttery Stor ge – If you do not use your fl shlight for long periods of
time (four months or more) we suggest you remove the b ttery p ck from the
fl shlight to prevent chemic l d m ge ( cid le ks). Electric l Cont cts – The b re
(bright) met l surf ces between the t ilc p nd b rrel must be cle ned periodic lly
to ensure good electric l cont ct. Also keep the t ilc p spring cle n. O-ring Se ls
nd Screw Thre ds – To keep se ls from drying out nd the thre ds oper ting
smoothly, pply sever l drops of cle n petroleum oil or jelly to these surf ces two
or three times ye r. Anodized Exterior Finish – The protective finish on the
fl shlight is very dur ble; however, const nt exposure to sunlight, w ter, chemic ls,
g ses, etc., will dull, discolor nd eventu lly destroy the protective finish. C re
should be t ken to void ny h rsh environment.
12 Volt Adapter (Automobile)
Plug the DC power cord’s d pter into the 12–
14 volt cig rette lighter recept cle of the
vehicle. DO NOT le ve d pter plugged in for
ny extended period while the engine is “off”
to void dr ining vehicle b ttery.
WARNING:
This d pter is designed for 12-14 volt
systems only. Do not use it to connect to 24 volt
circuit, s doing so c n cre te excessive he t, possibly
c use fire, nd d m ge electric l components.
120-240 Volt Converter (Indoor)
After mounting the ch rging cr dle in
proper loc tion, plug the converter into n
ppropri te 120-240 volt w ll recept cle.
Note: Tot l us ble wire length is 6 feet.
Flashlight
• Tempere aluminum alloy bo y
• Finish: har , type III, aircraft
ano ize (insi e an out)
• Length: ML150LR™-10-11/16" (271.45
mm) / ML150LRS™-8-1/4" (210 mm)
• Weight, with battery pack:
ML150LR™-15.5 oz. (439 grams) /
ML150LRS™-11.2 oz. (317.51 grams)
• Hea iameter: 1-15/16" (49.12 mm)
• Barrel iameter: 1-3/16" (30.15 mm)
• Permanently engrave serial
number for registration an
i entification
• O-ring seale throughout
• 6.4V-ML150LR™ / 3.2V-ML150LRS™
lithium iron phosphate (LiFePO4)
rechargeable battery pack
• Polycarbonate Lens
• Micro-polishe reflector
• Diamon knurl esign
• A justable beam from spot to floo
with about 1/4 turn of hea
• Corrosion resistant metal
springs throughout
Charging Cradle
• Accepts 12–14 volts DC (not for use
with 24-volt systems)
• Soli -state charging circuit
• Charge rate: 2500 mA
• Reverse voltage protecte
(prevents amage if battery is
inserte backwar s)
• Multi-color LED charge in icator
Converter
• 120-240 volts AC 50/60Hz
• Output 12 volts DC
• Double insulate
Fig. 12
Unplated Area
Flashlight:
Does not light
Battery charged?
Switch sticks
Works intermittently
Poor or no spot
Recharger/Cradle:
LED indicator does
not light.

S Section 7
13
Warranty Information
LIMITED WARRANTY (LIFETIME IN NORTH AMERICA; TEN YEARS
ELSEWHERE): M g Instrument, Inc., 2001 South Hellm n Ave., Ont rio,
C liforni , USA 91761, w rr nts to the first ret il purch ser of this
ML150LR™/ML150LRS™ fl shlight th t it is free from defects in p rts nd
workm nship. In North Americ , this w rr nty l sts for the life of th t
purch ser. In the rest of the world, it l sts for ten ye rs from the d te of first
ret il purch se. During w rr nty cover ge, M g or n uthorized M g
W rr nty Service Center will rep ir the fl shlight or, t its option, repl ce
defective fl shlight or component. (M g does not w rr nt the future
v il bility of ny p rticul r colors, m rkings or decor tions, nd m y
repl ce custom fl shlight with st nd rd fl shlight.) Proof of purch se is
required for w rr nty service. This w rr nty is in lieu of ll other w rr nties
nd conditions express or implied. It does not, however, ffect the st tutory
rights of consumer. Under EU l w (where pplic ble), the seller of new
fl shlights is li ble for ny l ck of conformity th t becomes pp rent within
two ye rs from delivery of the fl shlight; n tion l l ws of specific
jurisdictions, including EU Member St tes, m y give the consumer
ddition l rights.
EXCLUSIONS: This w rr nty does not cover ny of the following: 1. The
rech rge ble b ttery unless the cl im is m de within one ye r fter the
documented d te of first ret il purch se; 2. Any ccessory (including for
ex mple the rech rging pp r tus) unless the cl im is m de within one ye r
fter the documented d te of first ret il purch se; 3. Any electronic
component (including for ex mple the LED nd electronics involved in
switching, controlling or regul ting the LED) unless the cl im is m de within
one ye r fter the documented d te of first ret il purch se; or 4. D m ge to
or f ilure of the fl shlight or ny component or ccessory thereof, t ny
time, due to lter tion, misuse, or l ck of m inten nce.
Notwithst nding ny st tutory rights pplic ble in ny jurisdiction in the
event of f ilure by M g to fulfill this w rr nty, MAG DISCLAIMS ANY
RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some jurisdictions (countries, provinces, nd st tes) do not llow exclusion
or limit tion of implied w rr nties, incident l or consequenti l d m ges
nd/or limit tions on tr nsfer bility, so the bove limit tions nd exclusions
m y not pply to you.
HOW AND WHEN TO MAKE A WARRANTY CLAIM: To void expense
nd del y for w rr nty work th t might be unnecess ry, we strongly
recommend th t you first consult the “Troubleshooting” steps found in your
product m nu l or on M g’s website www.m glite.com. If these do not
resolve the problem, we recommend th t you c ll our W rr nty/Rep ir
dep rtment t the number found in your m nu l nd on M g’s website, to
see if the problem c n be resolved by phone. If not, nd if w rr nty
rep ir/repl cement is necess ry, then for w rr nty return of fl shlight
purch sed in the USA or C n d , send the fl shlight, b ttery or ccessory in
question, long with proof of first ret il purch se (post ge or shipping
prep id) to M g Instrument, 2001 South Hellm n Avenue, Ont rio,
C liforni , USA 91761, Attention: W rr nty/Rep ir Dep rtment. For
instructions on w rr nty return of fl shlight purch sed elsewhere th n the
USA or C n d , consult the ret iler where the fl shlight w s purch sed, or
visit M g’s website www.m glite.com, click on “Support,” select the country
of purch se, nd find the n me of n uthorized M g W rr nty Service
Center to which to send the fl shlight, b ttery or ccessory in question, with
proof of first ret il purch se (post ge or shipping prep id). For your
protection nd to expedite h ndling, we recommend th t ll returns be
insured nd shipped by c rrier th t c n tr ck or tr ce the p ck ge. This
w rr nty gives you specific leg l rights, nd you m y h ve other rights
which v ry from country to country, province to province, nd st te to st te.
Where ny term of this w rr nty is prohibited by the l w of ny jurisdiction,
such term sh ll there be null nd void, but the rem inder of this w rr nty
sh ll rem in in full force nd effect.
THESE STATEMENTS DO NOT AFFECT THE STATUTORY RIGHTS OF A
CONSUMER.
To obt in copy of this w rr nty, ple se send n em il with your request to
w rr nty@m gm il.com; or send written request by m il to M g t the
M g W rr nty/Rep ir Dep rtment ddress noted bove. In either c se,
ple se be sure to specify the model (e.g., ML150LR) nd seri l number of
your fl shlight.

CORPORATE OFFICE
MAG INSTRUMENT, INC. 2001 South Hellman Ave.
P.O. Box 50600 Ontario, California U.S.A. 91761-1083 Warranty: [phone] or
(909) 9 7-1006 fax: [phone]
e-mail: [email protected] Sales & Parts: (800) 289-62 1
or (909) 9 7-1006 email: [email protected] ©2018 Mag Instrument, Inc.
www.maglite.com
421-000-975 1/18
Owner’s Manual • Guide d’Utilisation • Manual del Propietario
The ML150LR™ an ML150LRS™ LED flashlights are covere by U.S. Patent
Nos. 7,125,140; 7,566,149; 8,210,710; 8,240,874; 8,366,290; 8,482,209; 8,960,949;
9,060,407; 9,255,696; 9,435,523; 9,453,625; 9,488,361; 9,494,285; 9,494,308;
9,549,454; 9,644,806; 9,671,102; 9,759,414; an 9,801,256. The charging cra le is
covere by U.S. Patent No. 9,812,880. The LED mo ule is covere by U.S. Patent
No. D625,847. Flashlight esigne an manufacture in U.S.A.; flashlight inclu es some
importe components; battery pack ma e in China; charging cra le assemble
in U.S.A. of U.S. an importe parts; 12 volt power cor assemble in U.S.A. of
importe parts; 120 volt A/C converter ma e in China.
The istinctive shapes, styles an overall appearances of all Mag® flashlights,
an the circumferential inscriptions exten ing aroun the hea s of all Mag®
flashlights are tra emarks of Mag Instrument, Inc. The circumferential
inscription on the hea of every flashlight signifies that it is an original Mag® flashlight an part of the Mag® family of flashlights. U.S. Tra emark
Registrations for the shape, style an overall appearance tra emarks of Mag®
flashlights an for circumferential inscription tra emarks of Mag® flashlights
inclu e Nos. 1,808,998; 2,074,795; 2,687,693; 2,745,460; 2,765,978 an 2,765,979.
The pair of ban s encircling the barrel of the ML150LR™ an ML150LRS™
flashlights is a registere tra emark of Mag Instrument, Inc., per U.S.
Tra emark Registration No. 5,116,742.
ML150LR™/ML150LRS™ LED
Rechargeable Flashlight System
• Lifetime Tough® Anodized
Aluminum Construction
• F st Focusing – Spot to Flood with
bout ¼ turn of the he d
• Multi-Mode Electronic Switch
en bles “Quick Click” ccess to:
• High Power Mode
• Low Power Mode
• Eco Mode
• Moment ry Mode
• Strobe Mode
• PERSONALI E for QUICK
ACCESS to your PREFERRED
FUNCTIONS.
• USER-CONFIGURABLE
for CIVILIAN, MILITARY
or LAW ENFORCEMENT Duty.
• Limited W rr nty (Lifetime in North
Americ ; Ten Ye rs Elsewhere)
Système de Torche Rechargeable
ML150LR™/ML150LRS™
LED
• Construction en luminium nodisé
Lifetime Tough®
• Mise u point r pide – Régl ge du
f isce u d'un mode diffus à un
mode étroit p r rot tion de l tête
d'environ ¼ de tour
• Le commut teur électronique
Multi-mode permet l' ccès « Quick
Click » u :
• Mode pleine puiss nce
• Mode f ible intensité
• Mode économique
• Mode moment né
• Mode stroboscope
• PERSONNALISER pour un
ACCÈS RAPIDE à vos
RÉGLAGES DE PRÉFÉRENCE.
• CONFIGURABLE PAR LES
UTILISEURS pour, entre autres,
des fonctions CIVILES,
MILITAIRES ou POLICIÈRES
• G r ntie limitée (g r ntie à vie en
Amérique du Nord, dix ns d ns le
reste du monde)
Sistema de Linterna Recargable
ML150LR™/ML150LRS™ LED
• Construcción en Aluminio
Anodiz do Lifetime Tough®
• H z de luz de lt intensid d, que
se just con solo un cu rto de
vuelt de c bez l
• El interruptor electrónico
multifunción permite cceder
tr vés del «Clic rápido» :
• Modo Alt Potenci
• Modo B j Potenci
• Modo Eco
• Modo Momentáneo
• Modo Estroboscópico
• PERSONALI ABLE para un
RÁPIDO ACCESO a sus
FUNCIONES PREFERIDAS.
• CONFIGURABLE por
USUARIOS CIVILES,
MILITARES o POLICIALES.
• G r ntí limit d (vit lici en
Norte méric ; de 10 ños en el
resto de p íses)