Mag-lite ML150LR User manual

CORPORATE OFFICE MAG INSTRUMENT, INC. 2001 South Hellman Ave. P.O. Box 50600 Ontario, California U.S.A. 91761-1083
Warranty: or 01 [phone] fax: [phone] e-mail: [email protected] Sales & Parts: 01 [phone] email: [email protected] ©2022 Mag Instrument, Inc. www.maglite.com
421-000-973 1/22
Owner’s Manual • Gebruiksaanwijzing • Guide d’Utilisation
Handbuch • Manuale d’uso • Manual del Propietario
The ML150LR™ and ML150LRS™ LED flashlights are covered by U.S. Patent Nos. 7,125,140; 7,566,149; 8,210,710; 8,240,874; 8,366,290; 8,482,209; 8,960,949; 9,060,407; 9,255,696; 9,435,523; 9,453,625; 9,488,361; 9,494,285; 9,494,308; 9,549,454; 9,644,806; 9,671,102; 9,759,414; and 9,801,256. The charging cradle is covered by U.S. Patent No. 9,812,880. The LED module is covered by U.S. Patent No. D625,847. Flashlight designed and manufactured in U.S.A.; flashlight includes some imported components; battery pack made in China; charging cradle assembled in U.S.A. of U.S. and imported parts; 12 volt power cord assembled in U.S.A. of imported parts; 120 volt A/C converter made in China. The distinctive shapes, styles and overall appearances of all Mag® flashlights, and the circumferential inscriptions extending around the heads of all Mag® flashlights are trademarks of Mag Instrument, Inc. The circumferential inscription on the head of every flashlight signifies that it is an original Mag® flashlight and part of the Mag® family of flashlights. U.S. Trademark Registrations for the shape, style and overall appearance trademarks of Mag® flashlights and for circumferential inscription trademarks of Mag® flashlights include Nos. 1,808,998; 2,074,795; 2,687,693; 2,745,460; 2,765,978 and 2,765,979. The pair of bands encircling the barrel of the ML150LR™ and ML150LRS™ flashlights is a registered trademark of Mag Instrument, Inc., per U.S. Trademark Registration No. 5,116,742.
ML150LR™/ML150LRS™LED Rechargeable Flashlight System • Lifetime Tough®Anodized Aluminum Construction • Fast Focusing – Spot to Flood with about ¼ turn of the head • Multi-Mode Electronic Switch enables “Quick Click” access to: - High Power Mode - Low Power Mode - Eco Mode - Momentary Mode - Strobe Mode • PERSONALIZE for QUICK ACCESS to your PREFERRED FUNCTIONS. • USER-CONFIGURABLE for CIVILIAN, MILITARY or LAW ENFORCEMENT Duty. • Ten Year Limited Warranty (Details inside) ML150LR™/ML150LRS™LED Oplaadbaar Zaklampsysteem • Lifetime Tough®Geanodiseerd aluminium Samenstelling • Snelle bundeling – puntstraal naar brede straal met ongeveer ¼ slag van de kop • Multi-modus elektronische schakelaar voor "Snelklikken" naar: - Hoog vermogen - Laag vermogen - Eco - Kortstondig - Stroboscoop • PERSONALISEER voor SNELLE TOEGANG tot uw FAVORIETE FUNCTIES. • TE CONFIGUREREN DOOR DE GEBRUIKER voor Gebruik op CIVIEL-, MILITAIR- of WETSHANDHAVINGSGEBIED. • Tien jaar beperkte garantie (zie binnenzijde voor details)
Système de Torche Rechargeable ML150LR™/ ML150LRS™LED • Construction en aluminium anodisé
Lifetime Tough®
• Mise au point rapide – Réglage du faisceau d'un mode diffus à un mode étroit par rotation de la tête d'environ ¼ de tour • • Le commutateur électronique Multi-mode permet l'accès « Quick Click » au : - Mode pleine puissance - Mode faible intensité - Mode économique - Mode momentané - Mode stroboscope • PERSONNALISER pour un ACCÈS RAPIDE à vos RÉGLAGES DE PRÉFÉRENCE. • CONFIGURABLE PAR LES UTILISEURS pour, entre autres, des fonctions CIVILES, MILITAIRES ou POLICIÈRES • Garantie Limitée de dix ans (détails à l'intérieur) ML150LR™/ML150LRS™ LED Wiederaufladbares Taschenlampensystem • Lifetime Tough®eloxiertes
Aluminumgehäuse
• Schnellfokussierung – Einstellung von „Spot“ auf „Flood“ („Spotlight-Einstellung“ auf „Flutlicht-Einstellung“) bei einer ca. ¼ Umdrehung des Kopfteils • Der Mehrmodus- Elektronikschalter ermöglicht einen „Quick Click“ zu: - Hochleistungsmodus - Energiesparmodus - Sparbetrieb - Blinkfunktionsmodus - Stroboskopmodus • PERSÖNLICH EINSTELLBAR für eine SCHNELLE WAHL Ihrer BEVORZUGTEN FUNKTIONEN. • VOM BENUTZER KONFIGURIERBAR für den ZIVILEN, MILITÄRISCHEN oder VOLLSTRECKUNGSBEHÖRDLICHEN Einsatz. • Zehn Jahre eingeschränkte Garantie (Einzelheiten beigefügt)
Sistema di torcia ricaricabile ML150LR™/ ML150LRS™ LED • Lifetime Tough® Struttura in alluminio
anodizzato
• Messa a fuoco veloce – Spot to Flood con circa ¼ di giro della testa • L'interruttore elettronico multimodale consente l'accesso "Quick Click" a: - Modalità Alta potenza - Modalità Bassa potenza - Modalità Eco - Modalità Istantanea- Modalità Stroboscopio • PERSONALIZZAZIONE per un ACCESSO
VELOCE alle FUNZIONI PREFERITE
• CONFIGURAZIONE UTENTE per scopi CIVILI, MILITARI o FORZE DELL'ORDINE. • Garanzia Limitata 10 Anni (dettagli all'interno) Sistema de Linterna Recargable ML150LR™/ ML150LRS™ LED • Construcción en Aluminio Anodizado Lifetime Tough® • Haz de luz de alta intensidad, que se ajusta con solo un cuarto de vuelta de cabezal • El interruptor electrónico multifunción permite acceder a través del «Clic rápido» a: - Modo Alta Potencia - Modo Baja Potencia - Modo Eco - Modo Momentáneo - Modo Estroboscópico • PERSONALIZABLE para un RÁPIDO ACCESO a sus FUNCIONES PREFERIDAS. • CONFIGURABLE por USUARIOS CIVILES, MILITARES o POLICIALES. • Garantía de 10 años (detalles en el interior)
Text MAGLITE to 88333 FOR SPECIAL DEALS & OFFERS Consent not a requirement of purchase. 5 Msgs/Month. Reply STOP to cancel, HELP for help. Msg&data rates may apply. Terms: slkt.io/2ZXM
[email protected] Maglite Europe GmbH & Co. KG Saline 14 D-78628 Rottweil, Germany
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. AVERTISSEMENT: Cancer et Troubles de
l’appareil
reproducteur -www.P65Warnings.ca.gov. ADVERTENCIA:
Cáncer y Daño Reproductivo - www.
P65Warnings.ca.gov.

LED Rechargeable Flashlight System
LED oplaadbaar zaklampsysteem
Système de Torche Rechargeable LED
Wiederauadbares LED-Taschenlampen-System
Sistema torcia ricaricabile LED
Sistema de linterna LED recargable
Owner’s Manual • Gebruiksaanwijzing • Guide d’Utilisation
Handbuch • Manuale d’uso • Manual del Propietario
The ML150LR™ and ML150LRS™ LED flashlights are covered by U.S. Patent Nos. 7,125,140; 7,566,149; 8,210,710; 8,240,874; 8,366,290; 8,482,209; 8,960,949; 9,060,407; 9,255,696; 9,435,523; 9,453,625; 9,488,361; 9,494,285; 9,494,308; 9,549,454; 9,644,806; 9,671,102; 9,759,414; and 9,801,256. The charging cradle is covered by U.S. Patent No. 9,812,880. The LED module is covered by U.S. Patent No. D625,847. Flashlight designed and manufactured in U.S.A.; flashlight includes some imported components; battery pack made in China; charging cradle assembled in U.S.A. of U.S. and imported parts; 12 volt power cord assembled in U.S.A. of imported parts; 120 volt A/C converter made in China. The distinctive shapes, styles and overall appearances of all Mag® flashlights, and the circumferential inscriptions extending around the heads of all Mag® flashlights are trademarks of Mag Instrument, Inc. The circumferential inscription on the head of every flashlight signifies that it is an original Mag® flashlight and part of the Mag® family of flashlights. U.S. Trademark Registrations for the shape, style and overall appearance trademarks of Mag® flashlights and for circumferential inscription trademarks of Mag® flashlights include Nos. 1,808,998; 2,074,795; 2,687,693; 2,745,460; 2,765,978 and 2,765,979. The pair of bands encircling the barrel of the ML150LR™ and ML150LRS™ flashlights is a registered trademark of Mag Instrument, Inc., per U.S. Trademark Registration No. 5,116,742.

For Your Safety Please Read
2
Read all safety instructions in this manual before attempting to use the
ML150LR™/ML150LRS™ LED Rechargeable Flashlight System. Keep
this manual for future reference. It contains important information about
safe operation and maintenance of the product.
SAFETY INSTRUCTIONS:
The safety instructions in this manual have been classified according to the
seriousness of the risk, as follows:
m
WARNING:
“Warning” indicates a hazardous situation that, if not avoided, could result in
death or serious injury.
O
CAUTION:
“Caution” indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury.
n
NOTICE:
“Notice” indicates information considered important that relates to avoiding
risk of damage to the flashlight or flashlight system itself and/or to other
property.
m
WARNINGS:
• The ML150LR™/ML150LRS™ flashlight is a high-intensity lighting device
that is safe during normal operating use in which it is used to project light
at a distance and the lens is not obstructed or blocked. It is not intended
for use in hazardous environments, such as explosive environments, where
only devices with appropriate hazardous certifications (such as “intrinsically
safe” and/or “explosion-proof”) should be used. If the device is left on when
the lens is obstructed or blocked, such misuse may create a potentially
dangerous heat build-up, which could possibly result in fire, depending
upon the environment in which the device is being misused.
• This flashlight is a high-intensity lighting device capable of causing eye
damage to the user or others. Avoid shining the flashlight directly into
anyone’s eyes.
• As is the case with any battery, never allow it to short circuit and do not
expose the battery of this device to fire or excessive heat, as this could
cause the battery to leak, rupture or explode.
• The charging cradle is not waterproof and should only be used in dry
indoor locations. Exposing the device’s charging system to liquids could
cause shorting and possible fire and/or electric shock.
• Never try to disassemble, repair or alter the AC adapter, plug or charging
cradle. Shorting and possible fire and/or electric shock could result.
Contact a Mag Authorized Warranty Service Center for repairs.
O
CAUTION:
• The flashlight is not designed to operate with the face cap off and the LED
exposed. If contacted directly, the exposed LED could become hot enough
to burn skin, or to melt or scorch some heat-sensitive materials, e.g.,
plastics, rubber, cloth fabrics, etc.
• Any battery may leak harmful chemicals which may damage eyes,
skin, clothing, or the inside of the flashlight. To avoid risk of injury, never
disassemble a battery pack, and do not let any material leaked from a
battery come in contact with eyes or skin. In the event of contact with eyes
or skin, wash the affected area immediately and obtain prompt medical
attention.
n
NOTICE:
To reduce the risk of harm to your flashlight:
• Locate power cord away from foot traffic and other causes of abrasion or
stress.
• Never pull on the power cord when unplugging the AC adapter. Grasp the
plug directly.
• Do not use non-rechargeable batteries in your Rechargeable Flashlight
System. Use only a MAG® rechargeable battery pack (ML150LR™ Model
No. 485-000-034), (ML150LRS™ Model No. 485-000-075).

www.maglite.com
3
• For prolonged storage, remove the battery pack and store it separately in
a non-conductive wrapping, such as a plastic bag.
• Carefully follow steps listed under “Inspection and Maintenance” in this
manual.
• Always use genuine ML150LR™/ML150LRS™ replacement parts and
accessories. Never connect the flashlight to any auxiliary product that has
not been approved by Mag Instrument, Inc. Doing so may damage the
product and void your warranty.
• Discontinue use immediately if you notice changes in the battery such as
swelling, discoloration or leakage.
• Recharge the Battery at temperatures between 32°F and 140°F (0°C
to 60°C), as charging outside this range can potentially reduce battery
capacity.
PROTECTION OF CHILDREN
• This product is not a toy, and is not intended or recommended for use by
children.
• Keep the flashlight, all accessories and components out of the reach of
small children – especially small parts that might present a choking hazard
to children.
BATTERY DISPOSAL
• Cover the metal terminals with insulating tape before disposal, to prevent
accidental short-circuiting.
• Never dispose of a battery pack by throwing it into a fire. Battery
explosion could result.
• Never discard a used battery pack with ordinary solid wastes, since it
contains toxic substances.
• The sealed Lithium Iron Phosphate (LiFePO4) battery stick supplied with
your flashlight must be recycled or disposed of properly. Contact your
local solid waste authority for proper recycling or disposal information.
Mag Instrument, Inc. is a proud participant in the RBRC (Rechargeable Battery
Recycling Corporation). By recycling LiFePO4rechargeable batteries, you are
helping to keep LiFePO4batteries out of the solid waste stream. When you throw
away a LiFePO4battery, it eventually ends up in a landfill or municipal incinerator.
By recycling your used LiFePO4batteries through Mag Instrument’s Battery
Recycling Program, you are helping to create a cleaner and safer environment for
generations to come. For more information about the RBRC visit www.rbrc.com

Getting Started
Taking a few moments to read this manual and familiarizing yourself with the ML150LR™/ML150LRS™
LED Rechargeable Flashlight System will help to insure years of superior service and satisfaction.
Section 1
1. Flashlight
2. Charging Cradle
3. Rechargeable Battery (LiFePO4)
4. 120 Volt Converter (US)
5. 12 Volt Adapter (Automobile)
6. 230 Volt Converter (Euro)
7. 240 Volt Converter (UK)
8. 12 Volt Straight Wire
(Automobile)
4
Contents
Getting Started .......................... 4
The Flashlight............................ 5
The Charging Cradle ......................6
Installation ................................7
Battery/Battery Charging..................8
Operation - Getting the Most out of
Your ML150LR™/ML150LRS™ LED
Rechargeable Flashlight System ..........10
Frequently Asked Questions ............11
Troubleshooting, Specifications.........12
Inspection and Maintenance ............12
Warranty................................13
Nederlands ..........................14
Français .............................26
Deutsch .............................38
Italia ................................50
Español .............................62
LED Rechargeable Flashlight System
Not all of the following 8 items are included with every Rechargeable Flashlight System shipped, as some
package contents may vary. To confirm which of the 8 items are included with your System, consult the package
in which the System was sold.
This manual covers both ML150LR™ & ML150LRS™ flashlights. Images shown are the ML150LR™.
8
67
4
5
2
1
3

Section 1 The Flashlight
5
23
4
15
1. Face Cap - The removable face cap, which is threaded onto
the head, is O-ring sealed and retains the polycarbonate lens and the
precision-engineered reflector that is the heart of the optical system.
2. Head - The head houses the reflector and
the LED module. The flashlight’s Quick-Adjustable
Beam operates by rotating the head. About ¼ turn
of the head causes the beam to vary between a wide
floodlight setting and a narrow spotlight setting (Fig.
1). To remove the head, first remove the face cap
and reflector; the head is then free to slide down the
barrel. This maneuver provides access to the O-ring
seal that is seated in a groove on the outside of the
barrel, near the head end, and seals the head-barrel
assembly against grit and moisture.
3. Switch - Sealed, flush-with-the-barrel electronic switch provides
access to five different functions – Full Power, Low Power, Strobe (12x/sec),
Eco, and Momentary On/Off.
4. Serial Number - Your flashlight’s unique serial number is permanently
engraved on the barrel for ease of identification and registration. Please note
your serial number for future reference:____________________.
5. Tail Cap - The tail cap is threaded onto the barrel and retains the
Lithium Iron Phosphate (LiFePO4) rechargeable battery. The tail cap/barrel
junction is sealed by a lip seal that prevents entry of moisture and grit, while
allowing the venting of any gas that may be generated within the flashlight.
The tail cap can be removed to inspect/replace the battery and to maintain/
replace the lip seal.
Fig. 1

Section 2
The Charging Cradle
Section 3
6
To remove the flashlight from the charging cradle: Grasp the flashlight, press the
quick-release button (Fig. 4A) and lift up (Fig. 4B).
To return the flashlight to the charging cradle: Place the front end of the light into
the front end of Charging Cradle, lower the flashlight until it clicks into place (Fig. 5).
Once it is mounted to a wall or in a vehicle, you’ll find that the technique for
removing and returning the flashlight to the Charging Cradle works with
one motion.
The quick-release button requires very little force to remove and return the
flashlight to the charging cradle.
Constructed of engineering grade thermoplastics, this Charging Cradle unit has many
features. Input can be from 12–14 volts (automotive installations) or 120-240 volts AC,
when used with a converter for charging indoors.
Fig. 3 Flashlight in the Charging Cradle
LED Charging Indicator
(Green/Red/Orange)
Quick-Release Button
Fig. 5
Fig. 4B
Fig. 4A

Section 2
Section 3
7
Installation
Fig. 7
Ground (–) lead
(black)
Positive (+) lead
(red)
Ignition-Switched Fuses
Charging Cradle Cord
Radio
Heater
Accessory
Note: For maximum protection of charging cradle and vehicle, it
is recommended that a 10 AMP
Slow Blow fuse is installed in the Positive (+) lead (red).
Charging Cradle
Direct Wire–Vehicle Installation 12–14 Volt Only (Not for 24-Volt Systems)
A 6’ power accessory cord is available to facilitate the direct-wiring of the rechargeable system (Fig. 7). MAG Instrument recommends
using an ignition-switched circuit (fused for 10 or 15 AMPS). This is most often the radio or accessory fuse. The Positive (+) lead (red) is
connected to the fuse output, and the Ground (-) lead (black) wire should be attached to a metal part of the chassis, which serves as a battery
ground return.
10 AMP
(See Note)
A Typical Installation
1. Locate and mount the cradle using appropriate screws and anchors for the
location and material.
2. Attach end of DC power cord or AC converter to charging cradle by
inserting round plug into power connection port in the side of the charging
cradle (Fig. 6, 7 & 10).
n
NOTICE: Never pull on the power cord when unplugging the AC adapter.
Grasp the plug directly.
OCAUTION: Make sure cable cannot be pinched. If cable is pinched it can
cause immediate short and wires can get hot, melt plastic, and create a fire
hazard.
Fig. 6
Power connection port

Section 4 Section 4
Battery
8
Your Battery’s First Charge Is Important!
To assure the freshness of your battery and to avoid any operational problems
in shipping, it has been packaged in an UNCHARGED state.
For optimum operation of your flashlight, it should be charged a full
6 hours … before using for the first time.
Battery Installation
If the battery was shipped outside of the flashlight: After you have removed the
flashlight from the Charging Cradle unscrew the tail cap (Fig. 8) and insert battery pack
(Fig. 9) into the barrel. The positive (+) end—this is the end with a button—goes into the
barrel first. Now screw on the tail cap and make sure it’s tight.
NOTE: Large end of the battery spring must be snapped into the tailcap.
First Charge Procedure
1. Connect charging cradle to the AC converter or DC accessory cord
(Fig. 10).
2. Plug into wall receptacle (AC) or DC power source cord.
3. Make sure charging cradle indicator LED is GREEN (see next page for
explanation of LED indicator colors).
4. Make sure flashlight tailcap is tight.
5. Place flashlight into charging cradle.
m
WARNING: As is the case with any battery, never allow it to short circuit and
do not expose the battery of this device to fire or excessive heat, as this could
cause the battery to leak, rupture or explode.
n
NOTICE: For prolonged storage, remove the battery pack and store it
separately in a non-conductive wrapping, such as a plastic bag. Cover the
metal terminals with insulating tape before disposal, to prevent accidental
short-circuiting.
Tailcap
Battery Spring
Flashlight Barrel
Fig. 8
Fig. 9
+
–
Fig. 10

Section 4
Section 4 Battery Charging
9
After the first (6-hour) charge, the total time to fully charge a
fully discharged battery is approximately (ML150LR™-2.5 hours)
(ML150LRS™-1.5 hours).
The charging cradle is provided with an LED that indicates battery
charge status by blinking and changing color (Fig. 11), as seen in the
accompanying chart.
Charger Mode Definitions:
• Charging: Battery charge level is below 80% and will fast charge for
up to 6 hours (maximum charge time for a deeply discharged battery).
Typical charge time is (ML150LR™-2.5 hours) (ML150LRS™-1.5
hours).
• Top Off/Maintenance: Battery charge level is at (or above) 80%
and will be slow charged to top off
• Idle: Battery charge level is at 100% and charging has stopped or
there is no light in the cradle
• Fault: Charger input/output Voltage is below the minimum threshold
for normal operation, a short-circuit is detected, or a component
failure has occurred.
ML150LR™/ML150LRS™ - ChaRging CRadLe FunCtionS
Battery State Charger Mode LED Indicator
0 - 80% Charging Orange
> 80% Top O/Maintenance Blinking Green
100% - No Light Idle Green
Unknown Fault Blinking Red
Fig. 11
LED indicator

Section 5
10
Section 5
Operation - Getting the most out of Your ML150LR
™
/ML150LRS
™
LED Rechargeable Flashlight System
Switch Operation
Your Flashlight’s Function Sets and the Functions Within
Each Set
The ML150LR™/ML150LRS™ LED flashlight includes powerful new
electronics, providing five different functions to choose from. Because not
all functions are equally important to all users, the ML150LR™/ ML150LRS™
LED flashlight offers an array of USER-CONFIGURABLE FUNCTION SETS
that LET YOU PERSONALIZE the settings for QUICKEST ACCESS to the
FUNCTIONS YOU USE MOST. The four available Function Sets are shown in
the below Function Sets Chart.
The ve dierent functions are: – Full Power, Low Power, Strobe (ashes 12 times
per second), Eco and Momentary On/O (stays on only while the switch button is
held down). Not all of these functions are equally important to every user. That
is why these functions are organized into four dierent function sets – so that
you can personalize your ashlight to suit your needs, conguring it for quickest
access to the functions that best match your preference.
How To Choose A Function Within a Set - “Quick Click”
The available function sets, and the functions within each one, are shown in the
Function Sets Chart.
As it comes out of the package, your ML150LR™/ML150LRS™ LED ashlight is
set to the “General (Default)” function set (FunctionSet#1 in the chart). If you require
only those three functions (Full Power, Low Power and Eco), then you never have
to change it. You can select a function within that set by the “Quick Click” method:
Turn the ashlight on with one Quick Click and it is on at Full Power. Turn it o,
then turn it on with two Quick Clicks (about as fast as you would say “Click Click”)
and it turns on at the Low Power function. Turn it o, then turn it on with three
Quick Clicks (about as fast as you would say “Click Click Click”) and you have the
Eco function.
Selecting a function within any of the other function sets works the same way –
starting with the ashlight o, invoke the desired function by applying 1, 2 or 3
“Quick Clicks”, as the chart shows. For example, if you are in “Outdoor” function
set (Function Set #2) and you want to select the Strobe function, begin with the
ashlight o, apply three Quick Clicks, and your ashlight will strobe.
How To Go From One Function Set To Another
Your ML150LR™/ML150LRS™ LED ashlight’s “General (Default)” setting is Function Set #1.
If you want to keep that setting you don’t have to do anything. Function Set #1 will always be
in eect unless it is changed. If you want to choose a dierent function set, follow these
steps:
1 GENERAL
2 OUTDOOR
3 LAW
ENFORCEMENT
4 TACTICAL
(Default)
Function Set
Function Sets Chart
Full Power
Low Power
Eco
Full Power
Low Power
Strobe
Momentary
Full Power
Eco
Momentary
Full Power
Strobe

Section 5
11
Section 5 Operation -
Getting the most out of Your ML150LR
™
/ML150LRS
™
LED Rechargeable Flashlight System
Operation - Getting the most out of Your ML150LR
™
/ML150LRS
™
LED Rechargeable Flashlight System
METHOD 1
1. Unscrew the tail cap, backing it out of the
barrel far enough that the ashlight will not turn
on. (Note: This may require the tailcap to be
removed from the barrel entirely).
2. Pause for 2 seconds.
3. Press the switch button and keep holding it down.
4. While still holding down the switch button, screw the
tail cap back in until it is tight.
5. Keep holding down the switch button. Within about
4 seconds the ashlight will start to blink.
6. The number of blinks indicates the new selected Function Set.
7. To choose a new Function Set, release the switch button after the corresponding
number of blinks (releasing after 1 blink chooses Function Set #1; releasing after 2 blinks
chooses Function Set #2; release after 3 blinks for Function Set #3, and release after 4 blinks to
choose Function Set #4.) Your choice of a Function Set remains in eect until you change it
by repeating the above process. (See our Demo video at www.maglite.com)
METHOD 2 - STEP 1
• Click the light into HIGH mode and hold the button down for ve seconds.
NOTE: If the light is currently congured for Function Set 1 or 2, then the user will
begin from the OFF mode, click once and hold.
If the light is currently congured for Function Set 3 or 4, then the user will begin
from OFF mode, click twice and hold.
• After ve seconds, the light will turn o for .25 seconds and then back on again
indicating that the light is now unlocked. The Function Set can be changed at turn-o
and without loosening the tail cap (traditional method).
• Release the button at any time.
STEP 2
• Click and hold the button down for ve seconds.
• After ve seconds the light will turn OFF, continue holding the button.
• After three seconds the light will begin to blink in successive patterns which
represent a particular Function Set, from this point everything is the same as the
traditional method.
NOTE: One blink, is Function Set 1 (GENERAL), release the button to save this set
into memory.
Two blinks, Function Set 2 (OUTDOOR), release the button to save this set into
memory.
Three blinks, Function Set 3 (LAW ENFORCEMENT), release the button to save this
set into memory.
Four blinks, Function Set 4 (TACTICAL), release the button to save this set into
memory.
n
NOTICE: To avoid deeply discharging the rechargeable LiFePO4battery, always turn
the flashlight off when the flashlight beam starts to dim. A dim beam is an indication that
the battery needs to be recharged.
Spot-to-Flood Beam
The quick focusing spot-to-flood beam operates with a simple quarter turn of the
flashlight head assembly.
Frequently Asked Questions
Q. How long can I leave the flashlight in the Charging Cradle (on charge) without
using?
A. Indefinitely. Your charging cradle is suitable for permanent stowage of the flashlight.
Because the cradle automatically shuts off when it detects that the flashlight has taken a full
charge, you don’t ever have to worry about overcharging the flashlight. If the flashlight sits
idle in the cradle for a long enough time to lose a little of its charge, the cradle detects that,
too, and applies a “top off/maintenance” charge. But again, it will stop charging when the
charge is back up to 100%. The cradle will never overcharge the flashlight.
Q. If dust occurs inside my reflector, how do I clean it without damage to the
reflector?
A. Do not touch reflector. Use a camel hair brush lightly or blow with a compressed air duster
as used on computers and electronics. Use the same care that you would give a precision
camera lens.
Q. How do I get a fingerprint off my reflector?
A. Use a camera lens cleaner and a lint-free cloth.

Section 6 Section 7
12
Troubleshooting Specifications and Accessories
If you have questions or need assistance, please call our warranty/repair
facility at 01 [phone].
Problem Cause/Correction
1. Make sure battery is installed, with positive (+) end toward head of
flashlight.
2. Make sure large end of battery spring is snapped into tailcap.
3. Tighten tail cap – make sure unplated area of tail cap and barrel are
clean. See fig. 12
1. Check battery charge: Place flashlight in recharger/cradle. Make
sure LED lights up (see page 8). Charge for 15 minutes … check
for light. If it lights (even momentarily) charge it, if not, replace it
(battery).
1. Return flashlight to Mag Instrument (see warranty).
1. Check for damage to battery casing.
2. Foreign particles inside barrel.
1. Damaged LED.
1. Tighten tail cap.
2. Check plug connection to
converter.
3. Check plug to power
source.
4. Make sure large end of
battery spring is
snapped into tailcap.
Inspection and Maintenance
Battery Pack – See Warnings Section for more information. Periodically (approximately
every month) remove the battery pack from the flashlight and visually inspect for signs
of gas or chemical leakage. Indications of leakage are discoloration of the plastic sleeve
or white fuzzy material near the top (positive button) of each cell. Another indication
would be a bulging deformation of the bottom (negative flat end) of the cell can. If
these signs are observed the battery pack should be removed from service to prevent
chemical damage to the inside of the flashlight. See One Year Battery Pack Warranty
for more information concerning warranty coverage.
Fully Charged Battery Storage – If you do not use your flashlight for long periods of
time (four months or more) we suggest you remove the battery pack from the flashlight
to prevent chemical damage (acid leaks). Electrical Contacts –The bare (bright) metal
surfaces between the tailcap and barrel must be cleaned periodically to ensure a
good electrical contact. Also keep the tailcap spring clean. O-ring Seals and Screw
Threads – To keep seals from drying out and the threads operating smoothly, apply
several drops of clean petroleum oil or jelly to these surfaces two or three times a
year. Anodized Exterior Finish – The protective finish on the flashlight is very durable;
however, constant exposure to sunlight, water, chemicals, gases, etc., will dull, discolor
and eventually destroy the protective finish. Care should be taken to avoid any harsh
environment.
12 Volt Adapter (Automobile)
Plug the DC power cord’s adapter into the 12–14
volt cigarette lighter receptacle of the vehicle.
DO NOT leave adapter plugged in for any
extended period while the engine is “off”
to avoid draining vehicle battery.
m
WARNING: This adapter is designed for 12-14 volt
systems only. Do not use it to connect to a 24 volt circuit,
as doing so can create excessive heat, possibly cause a fire,
and damage electrical components.
120-240 Volt Converter (Indoor)
After mounting the charging cradle in a
proper location, plug the converter into an
appropriate 120-240 volt wall receptacle.
Note: Total usable wire length is 6 feet.
Flashlight
• Tempered aluminum alloy body
• Finish: hard, type III, aircraft anodized
(inside and out)
• Length: ML150LR™-10-11/16"
(271.45 mm) / ML150LRS™-8-1/4"
(210 mm)
• Weight, with battery pack:
ML150LR™-15.5 oz. (439 grams) /
ML150LRS™-11.2 oz. (317.51 grams)
• Head diameter: 1-15/16" (49.12 mm)
• Barrel diameter: 1-3/16" (30.15 mm)
• Permanently engraved serial number
for registration and identification
• O-ring sealed throughout
• 6.4V-ML150LR™ / 3.2V-ML150LRS™
lithium iron phosphate (LiFePO4)
rechargeable battery pack
• Polycarbonate Lens
• Micro-polished reflector
• Diamond knurl design
• Adjustable beam from spot to flood
with about 1/4 turn of head
• Corrosion resistant metal
springs throughout
Charging Cradle
• Accepts 12–14 volts DC (not for use
with 24-volt systems)
• Solid-state charging circuit
• Charge rate: 2500 mA
• Reverse voltage protected (prevents
damage if battery is inserted
backwards)
• Multi-color LED charge indicator
Converter
• 120-240 volts AC 50/60Hz
• Output 12 volts DC
• Double insulated
Fig. 12
Unplated Area
Flashlight:
Does not light
Battery charged?
Switch sticks
Works intermittently
Poor or no spot
Recharger/Cradle:
LED indicator does
not light.

Section 6
Section 7
13
Warranty Information
TEN YEAR LIMITED WARRANTY ON FLASHLIGHT SYSTEM
/ ONE YEAR LIMITED WARRANTY ON BATTERY PACK
MAG INSTRUMENT, INC. (“Mag”) warrants to the original owner that this ML150LR™/
ML150LRS™ SYSTEM (the “SYSTEM”) is free from defects in parts and workmanship. As
to the flashlight and other components of the SYSTEM, except the rechargeable battery
supplied herewith, this warranty lasts for ten years from the date of first retail purchase.
As to the battery, this warranty lasts for one year from date of purchase. Registration is
not required for warranty coverage. Mag or an authorized Mag Warranty Service Center
will repair the flashlight or other SYSTEM component or, at its option, replace a defective
flashlight or other SYSTEM component free of charge. This warranty is in lieu of all other
warranties and conditions, express or implied.
Exclusions: This warranty does not cover LED burnout and/or LED module failure
or damage to or failure of the SYSTEM or any component thereof due to alteration,
product misuse, lack of maintenance, or leakage of a battery more than one year after
date of purchase. (Product misuse includes, but is not limited to, installing any non-
rechargeable battery or any rechargeable battery pack other than a Mag® battery pack
or its technical equivalent.)
Mag disclaims any responsibility for incidental or consequential damages. Some
jurisdictions in do not allow exclusion or limitation of implied warranties, incidental or
consequential damages and/or limitations on transferability, so the above limitations
and exclusions may not apply to you. THIS WARRANTY DOES NOT AFFECT THE
STATUTORY RIGHTS OF A CONSUMER.
How and when to make a warranty claim: Before returning the flashlight or other
SYSTEM component for service, be sure you have followed the steps outlined in the
Troubleshooting Guide section of your ML150LR™/ML150LRS™ SYSTEM Owner’s
Manual. If you have followed all of these steps and the flashlight or other SYSTEM
component fails to operate properly, proceed as follows: 1. In case of rechargeable
battery failure more than one year after purchase date, do not return the flashlight or
other system component to Mag but replace battery. You can buy replacement batteries
directly from Mag or from most retail outlets where Mag flashlights are sold. 2. For
warranty returns: Send the flashlight or other SYSTEM component (postage or shipping
prepaid) to Mag Instrument, 2001 South Hellman Avenue - 50600, Ontario, California,
USA 91761-8019, Attention: Warranty/Repair Department, or to an authorized Mag
Warranty Service Center. For the location of an authorized Mag Warranty Service Center
in your area, consult the retailer where you purchased the flashlight. For your protection
and to expedite handling and/or postal claims, we recommend that all returns be insured
and sent Certified and/or Return Receipt Requested.
This warranty gives you specific legal rights, and you may have other rights which
vary from country to country, state to state and from province to province. Where
any term of this warranty is prohibited by the law of any jurisdiction, such term shall there
be null and void, but the remainder of this warranty shall remain in full force and effect.
To register your new Mag® flashlight visit our website at www.maglite.com. From our
home page just go to “Register Your Flashlight.“ Registration is not required for warranty
coverage.

Lees deze gebruiksaanwijzing voor uw veiligheid
Lees alle veiligheidsinstructies in deze handleiding voordat u het
oplaadbare led-zaklampsysteem ML150LR™/ML150LRS™ in gebruik
neemt. Bewaar deze handleiding voor toekomstig gebruik. De
handleiding belangrijke informatie over veilige bediening en onderhoud
van het product.
VEILIGHEIDINSTRUCTIES:
De veiligheidsinstructies in deze handleiding zijn als volgt ingedeeld volgens
de ernst van het risico:
m
WAARSCHUWING:
“Waarschuwing” duidt op een gevaarlijke situatie die, als deze niet wordt
vermeden, een dodelijke afloop kan hebben of kan leiden tot ernstig letsel.
O
VOORZICHTIG:
“Voorzichtig” duidt op een gevaarlijke situatie die, als deze niet wordt
vermeden, een klein of middelmatig ernstig letsel tot gevolg kan hebben.
n
LET OP:
“Let op" duidt op informatie die van belang is in verband met risico
op schade aan de zaklamp of het zaklampsysteem zelf en/of andere
eigendommen.
m
WAARSCHUWINGEN:
• De zaklamp ML150LR™/ML150LRS™ is een verlichtingsapparaat met
hoge intensiteit, dat veilig is bij normaal operationeel gebruik, als het
wordt gebruikt om licht op een afstand te projecteren en als de lens niet
wordt geblokkeerd. De zaklamp is niet bedoeld voor gebruik in gevaarlijke
omgevingen, zoals explosieve omgevingen, waar alleen apparaten
met passende gevaarlijke certificeringen (zoals "intrinsiek veilig" en/of
"explosieveilig") mogen worden gebruikt. Als het apparaat wordt aangelaten
wanneer de lens wordt geblokkeerd, kan een dergelijk misbruik leiden tot
een potentieel gevaarlijke warmteopbouw, die mogelijk tot brand leidt,
afhankelijk van de omgeving waarin het apparaat wordt misbruikt.
• Deze zaklamp is een verlichtingsapparaat met hoge intensiteit, die de
gebruiker en anderen oogbeschadigingen kan toebrengen. Vermijd de
zaklamp rechtstreeks in andermans ogen te schijnen.
• Zoals het geval is met alle batterijen, moet u deze nooit kortsluiten en
blootstellen aan brand of extreme hitte, aangezien de batterij hierdoor kan
gaan lekken, scheuren of exploderen.
• Het oplaadstation is niet waterdicht en mag alleen worden gebruikt in
droge overdekte plaatsen. Het oplaadsysteem aan vloeistoffen blootstellen
kan leiden tot kortsluiting en mogelijk brand en/of elektrische schok.
• Probeer de wisselstroomadapter, de stekker of het oplaadstation nooit
te demonteren, te repareren of te wijzigen. Kortsluiting en mogelijk brand
en/of elektrische schok kunnen het gevolg zijn. Neem contact op met een
erkend Warranty Service Center van Mag voor reparaties.
O
VOORZICHTIG:
• De zaklamp is niet ontworpen voor gebruik met de voorkap eraf en de led
blootgesteld. Bij directe aanraking kan de blootgestelde led heet genoeg
zijn om de huid te verbranden of bepaalde warmtegevoelige materialen,
zoals kunststof, rubber, doek stoffen, enz. te smelten of te verschroeien.
• Een batterij kan schadelijke chemische stoffen lekken die ogen, huid,
kleding of de binnenkant van de zaklamp kunnen beschadigen. Ter
voorkoming van het risico op verwonding moet u een batterij nooit
demonteren en materiaal dat uit een batterij is gelekt, niet in contact laten
komen met ogen of huid. In geval van contact met ogen of huid moet u het
getroffen gebied onmiddellijk wassen en medische hulp inroepen.
n
LET OP:
Ter vermindering van het risico van schade aan uw zaklamp:
• Laat het netsnoer uit de buurt van voeten en andere oorzaken van
schuren of druk.
• Trek nooit aan het netsnoer bij het loskoppelen van de
14

wisselstroomadapter. Pak de stekker rechtstreeks vast.
• Gebruik geen niet-oplaadbare batterijen in uw oplaadbare
zaklampsysteem. Gebruik alleen een MAG® oplaadbare batterij (ML150LR™
modelnr. 485-000-034), (ML150LRS™ modelnr. 485-000-075).
• Voor langdurige opslag verwijdert u de batterij en slaat u deze apart op in
een niet-geleidende verpakking, zoals een plastic zak.
• Volg nauwgezet de stappen onder "Inspectie en onderhoud" in deze
handleiding.
• Gebruik altijd originele vervangende onderdelen en accessoires van
ML150LR™/ML150LRS™. Sluit de zaklamp nooit aan op ondersteunende
producten die niet zijn goedgekeurd door Mag Instrument, Inc. Nalatigheid
kan schade aan het product veroorzaken en uw garantie ongeldig maken.
• Staak het gebruik onmiddellijk als u veranderingen in de batterij merkt,
zoals zwelling, verkleuring of lekkage.
• Laad de batterij bij een temperatuur tussen 0°C en 60°C. Opladen buiten
dit bereik kan de batterijcapaciteit aantasten.
BESCHERMING VAN KINDEREN
• Dit product is geen speelgoed en is niet bedoeld of aanbevolen voor
gebruik door kinderen.
• Houd de zaklamp, alle accessoires en onderdelen buiten het bereik van
kleine kinderen – met name kleine onderdelen die een verstikkingsgevaar
kunnen opleveren voor kinderen.
BATTERIJVERWIJDERING
• Bedek de metalen klemmen met isolerende band vóór verwijdering om
abusievelijke kortsluiting te voorkomen.
• Gooi een batterij nooit in een vuur. Explosie van de batterij kan het gevolg
zijn.
• Gooi nooit een gebruikte batterij weg met gewoon vast afval, aangezien
de batterij giftige stoffen bevat.
• De verzegelde batterijstick van lithium-ijzerfosfaat (LiFePO4) die met
uw zaklamp is geleverd, moet op de juiste manier worden gerecycled
of afgevoerd. Neem contact op met de lokale instanties voor vaste
afvalstoffen voor goede voorlichting over recycling of verwijdering.
15
Mag Instrument, Inc is een trots deelnemer van de RBRC (Rechargeable Battery
Recycling Corporation). Door LiFePO4 oplaadbare batterijen te recyclen helpt u
LiFePO4-batterijen te houden uit de vast-afvalstroom. Wanneer u een LiFePO4-
batterij weggooit, eindigt deze op een stortplaats of in een gemeentelijke
verbrandingsinstallatie. Door uw gebruikte LiFePO4-batterijen te recyclen via het
batterijrecyclingprogramma van Mag Instrument draagt u bij aan een schoner
en veiliger milieu voor toekomstige generaties. Ga voor meer informatie over de
RBRC naar www.rbcr.com.
www.maglite.com

LED oplaadbaar zaklampsysteem
Inhoud
Om te beginnen.........................16
De zaklamp .............................17
De oplaadhouder .......................18
Installatie ...............................19
Batterij/Batterij laden....................20
Werking – Haal het Maximale uit
uw ML150LR™/ML150LRS™ LED
Rechargeable Flashlight System ..........22
Veel gestelde vragen....................23
Inspectie en onderhoud.................24
Probleemoplossing, specificaties
en toebehoren ..........................24
Garantie-informatie .....................25
Om te beginnen
Door deze handleiding te lezen en vertrouwd te raken met het ML150LR™/ML150LRS™ LED oplaadbaar-
zaklampsysteem verzekert u zich van jaren superieure service en tevredenheid.
Deel 1
16
Niet alle van de volgende 8 items worden geleverd met alle oplaadbare zaklampsystemen. De
verpakkingsinhoud kan dus variëren. Raadpleeg het pakket waarin het systeem is verkocht om te controleren
welke van de 8 items zijn opgenomen in uw systeem.
Deze handleiding heeft betrekking op de ML150LR™- en ML150LRS™-zaklampen. De afbeeldingen tonen de ML150LR™.
8
67
4
5
2
1
3
1. Zaklamp
2. Oplaadhouder
3. Oplaadbare batterij (LiFePO4)
4. 120V-omvormer (VS)
5. 12V-adapter (auto)
6. 230V-omvormer (Europa)
7. 240V-omvormer (UK)
8. 12 V directe verbinding (auto)

Deel 1 De zaklamp
17
1. Voorkap - De verwisselbare voorkap, die op de kop wordt
geschroefd, heeft een O-ring voor de afdichting en houdt de
polycarbonaat-lens en de precisie-reflector vast, de hart van het optische
systeem.
2. Kop - De kop herbergt de reflector en de led-
module. De snel-verstelbare lichtbundel van de zaklamp
werkt door de kop te draaien. Door de kop ongeveer
een kwartslag te draaien verandert de lichtbundel van
een brede straal in een smalle puntstraal (fig. 1). Om
de kop te verwijderen, moeten eerst de voorkap en
de reflector worden weggehaald; de kop is dan vrij om
langs de cilinder te schuiven. Deze manoeuvre biedt
toegang tot de O-ringafdichting die in een groef aan de
buitenkant van de cilinder zit, in de buurt van het einde
van de kop, en die ervoor zorgt dat er geen gruis en
vocht in de kop-cilinderconstructie komt.
3. Schakelaar - Afgedichte schakelaar, elektronische - gelijk met de cilinder
- biedt toegang tot vijf verschillende functies – Vol vermogen, Laag vermogen,
Stroboscoop (12 x/sec), Eco en Kortstondig Aan/uit.
4. Serienummer - Het unieke serienummer van uw zaklamp is
onuitwisbaar gegraveerd op de cilinder voor een eenvoudige identificatie en
registratie. Noteer uw serienummer voor toekomstig gebruik:______________.
5. Bodemkap - De bodemkap wordt op de cilinder geschroefd en
beschermt de lithium-ijzerfosfaat (LiFePO4) oplaadbare batterij. De
bodemkap/cilinderverbinding wordt afgedicht door een afdichtingslip die
het binnendringen van vocht en gruis voorkomt, terwijl gas kan worden
doorgelaten dat binnen de zaklamp kan worden gegenereerd. De bodemkap
kan worden verwijderd om de batterij te inspecteren/vervangen en voor het
onderhouden/vervangen van de afdichtingslip.
Afb. 1
23
4
15

De zaklamp uit het laadstation halen: Pak de zaklamp, druk op de snelontkoppeling (fig.
4A) en til deze op (fig. 4B).
De zaklamp terugplaatsen in het laadstation halen: Plaats het voorste uiteinde van de
lamp in de voorzijde van het laadstation, laat de zaklamp zakken totdat deze vastklikt (fig.
5).
Als deze aan de muur of in een auto is gemonteerd, zult u ontdekken dat de techniek om
de zaklamp in het laadstation te plaatsen of eruit te halen met één beweging werkt.
Het snelontkoppelingsknop vereist zeer weinig kracht om de zaklamp uit het laadstation
te halen en er weer in te plaatsen.
Dit oplaadstation is multifunctioneel en is gemaakt van kwalitatief hoogstaande
thermoplasten. De invoer kan worden ingesteld op 12-14 volt (installaties in auto's) of 120-
240 volt AC, in combinatie met een transformator voor het opladen binnenshuis.
Deel 2
De Oplaadhouder
Deel 3
18
Afb. 3 Zaklamp in oplaadhouder
Oplaad-ledlamp
(Groen/rood/oranje)
Snelontkoppelingsknop
Afb. 5
Afb. 4B
Afb. 4A

Deel 2
Deel 3
19
Afb. 7
Aard (-) kabel (zwart)
Positieve (+)
voedingsdraad (Rood)
Via ontsteking geschakelde zekeringen
Oplaadhoudersnoer
Radio
Verwarming
Accessoire
Opmerking: Voor maximale bescherming van het laadstation en auto wordt de installatie van
een 10 amp vertragingszekering aanbevolen in de positieve (+) kabel (rood).
De oplaadhouder
Voertuiginstallatie met directe verbinding Alleen 12–14 volt (niet voor 24V-systemen)
Een 6"-accessoiresnoer is verkrijgbaar om de directe bedrading van het oplaadbare systeem mogelijk te maken (fig. 7). MAG Instrument raadt het gebruik aan van
een contactgeschakeld circuit (gezekerd voor 10 of 15 ampère). Dit is meestal de radio- of accessoire zekering. De positieve (+) kabel (rood) wordt aangesloten
op de uitgang van de zekering en de aardekabel (-) (zwart) moet worden aangesloten op een metalen deel van het chassis, dat fungeert als een aardeteruggeleider
van de batterij.
Installatie
10 AMP
(Zie opmerking)
Elektrische aansluiting
Afb. 6
A Gewone installatie
1. Zoek een geschikte locatie en monteer de houder met behulp van geschikte
schroeven en pluggen.
2. Bevestig het uiteinde van de gelijkstroomkabel of de wisselstroomomvormer
aan het laadstation door de ronde stekker in de stroomaansluiting aan de
zijkant van het laadstation te steken
(fig. 6, 7 & 10).
n
LET OP: Trek nooit aan het netsnoer bij het loskoppelen van de
wisselstroomadapter. Pak de stekker rechtstreeks vast.
OVOORZICHTIG: Zorg ervoor dat de kabel niet wordt bekneld. Een beknelde
kabel kan kortsluiting veroorzaken en de kabel kan zo heet worden dat het
plastic smelt en brand het gevolg kan zijn.