Magnum Industrial MI-91400 Quick start guide

MODEL NO.: MI-91400
PARTS BREAKDOWN

RULES for SAFE OPERATION
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
To help ensure safe operation, please take a moment to learn the how to operate the machine and
understand its applications and limitations, as well as potential hazards. KMS Tools and Equipment
disclaims any real or implied warranty and holds itself harmless for any injury that may result from
the improper use of its equipment.
under the effects of drugs, alcohol or any medication that
saw.
proofing and tamper proofing your shop and all machinery
with locks, master electrical switches and switch keys.
momentary distraction can lead to serious injury.
machine.
starting your cut.
rate for which it was designed.
with the power on.
contacted.
the power cord.
disclaims any real or implied warranty and holds itself
harmless for any injury that may result from that use.

ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
201 X2
212 X2
204 X1
204
210 X1
step 03.
step 02.
212
1.
2.
step 06.
210
211
step 01.
201
212
step 05.
201
step 04.
214
step 07.

ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
Take the band saw out of the box and lay it on its
as shown in fig-8. You can place the carton on
the floor under the band saw preventing it from
getting scratched.
Position the motor on the band saw and carefully
insert the motor pulley through the hole as shown
in fig-9. Align the holes on the motor mounting
bracket with the holes on the band saw base.
Insert the carriage bolts from under the base
through the holes, place washers, and tighten the
nuts provided onto the carriage bolts. Do not fully
tighten the nuts at this time.
Place the stand and the band saw upright.
Get the help of a friend or assistant and lift the
machine and place it on the stand. Align the
mounting holes on the machine with the holes on
the stand and secure the machine on to the stand
Open the lower cabinet door and position the
V-belt onto one of the grooves on the idler pulley.
Now pull the V-belt and position it onto the
aligned groove on the motor pulley and tighten
Once the motor is mounted, connect the power
coming from the motor to the power cord from
the machine. Do not connect the machine to the
power source at this time.
Motor Mounting
Nuts & Screws
Idler Pulley
Motor Pulley

ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
ATTACHING THE TABLE
adjustments are easy to make with the angle scale and lock
ATTACHING THE TABLE CONTINUED
assistant tap them into

ASSEMBLY INSTRUCTIONS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
INSTALLING THE FENCE ASSEMBLY
WARNING!
FIGURES 15 : TABLEINSTALLATION

BASIC ADJUSTMENTS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
WARNING!
TILTING THE TABLE
ADJUSTING 90º TABLE STOP AND RE-ALIGNING ANGLE
POINTER
position automatically without further adjustments and scale

BASIC ADJUSTMENTS
MAGNUM INDUSTRIAL MI-91400 DELUXE 14” BAND SAW
WARNING!
ADJUSTING THE UPPER AND LOWER BLADE GUIDES
during cutting.
key.
a feeler gauge or piece of paper to check the clearance.

PARTS LIST FOR MI-91400

PARTS LIST FOR MI-91400

23
16
15
14
8
11
12A
7
8
10
13A
10
1
17
18
19
20
21
3
22 JS-FENCE
PARTS LIST FOR MI-91400
PARTS LIST FOR MI-91400-JSF
214