Mainstays 9409WWWM User manual

Pg 1 of 38 1-800-892-3986 IS9949
MCS 6/03/2019
Assembly Instructions
Model
9409WWWM (White)
support rail (F)
location for
front or back
Before You Begin:
Thank you for purchasing this product. Please identify all parts and hardware
pieces before you begin. When laying out parts, place them on a soft surface
to prevent scratching.
If any pieces are missing, call our Toll Free Number 1-800-892-3986 between
8:00AM-5:00PM EST Monday through Friday.
For Spanish and French instructions, start on page 20.
Para instrucciones en español y francés, comience en la página 20.
Pour les instructions espagnoles et françaises, commencez à la page 20.

Pg 2 of 38 1-800-892-3986 IS9949
Cleaning Note:
Cleaning with a dry cloth may be sufficient, but for other stains or marks wipe gently with a damp cloth.
DO NOT use strong detergents or abrasive cleaners, they may damage the surface of this product.
It is imperative that the unit be fastened to the wall for safety
and stability.
For safety reasons, it is imperative
to use a stepladder.
Tools Needed - not included
Leg Extensions - See Installation Options on page 6.
Standard Installation
(29.7 in. inside height)
Included
Leg Extensions
OPTION A adds 3 in.
(32.7 in. inside height)
Optional
Leg Extensions
OPTION B adds 4.5 in.
(34.2 in. inside height)
• Leg extensions install to the bottom of side panels (G) BEFORE step 1. See page 6 for leg extensions installation.
• If selecting OPTION B, you may order leg extensions (be sure to include the model number and the color)
by calling toll free 1-800-892-3986 between 8:00AM-5:00PM EST Monday - Friday.
29.7 in.
G
G
GGGG
If using the leg extensions (option A),
install to bottom side panels (G) BEFORE step 1.
32.7 in. 34.2 in.

Pg 3 of 38 1-800-892-3986 IS9949
ATop and Bottom Shelf 2
BFixed Shelf 2
CTop Side Panel ( C-R right and C-L left) 2
DDoor 2
List of Parts
EBack Panel 1
FSupport Rail / Trim 2
GBottom Side Panel 2
HOptional Leg Extension 2
A
A
B
BC-R
E
F
F
G
C-L
D
D
G
three holes
at the bottom
H
H

Pg 4 of 38 1-800-892-3986 IS9949
Large Screw
Hinge Screw
Cambolt
Magnet
Hinge Bushing
Magnet Screw
Hinge
Allen Wrench for
use with Large Screws (H2) x 1
x 24
x 2
x 4
x 4
x 4
x 1
x 2
Nail x 40
Plastic Snap Cam x 2
H 10
H 1
H 2
H 3
H 4
H 5
H 6
H 7
H 8
H 9
List of Hardware

1-800-892-3986 IS9949
Pg 5 of 38
Wall Mount Kit
Sheet of 6 stickers
Knob Screw
Magnet Strike
Magnet Strike Screw
Knob
x 2
x 2
x 2
x 2
x 3
H 11
H 12
H 13
H 14
Screw Cap x 16
H 15
H 16
List of Hardware - continued
Nylon Strap
Washer
Anti-tip Screw x 1
x 2
x 1

Pg 6 of 38 1-800-892-3986 IS9949
Leg Extensions with Feet - Option B adds 4.5 in. call toll free 1-800-892-3986.
Fig. 1
Screws
Closed end
Front of Foot
•Attach a foot to a leg extension with the supplied hardware and repeat for the other foot and extension. Fig 1.
NOTE: The closed end of leg extension faces out.
•Insert the bottom side panels (G) into the middle channel, making sure the bottom side panels are completely
aligned with the leg extensions. Fig 2. NOTE: If needed, lightly tap the leg extension with a rubber mallet to install.
Leg Extensions - Option A adds 3 in.
• NOTE: The closed end faces out.
• Insert the bottom side panels (G) into the middle channel, making sure the space saver is completely
aligned with the leg extensions. NOTE: If needed, lightly tap the leg extension with a rubber mallet to install.
Fig. 2
H
G
G
H
H
back of
bottom side panel
Closed end
towards front
H
G
back of
bottom side panel
Closed end
towards front

Pg 7 of 38
Step 1 - Leg Assembly.
1-800-892-3986 IS9949
G
G
F
unfinished edge
facing up
G
F
H 2
H 1
H 2 x 4
• Fasten ONE support rail (F) to bottom side panels (G). This is the bottom assembly.
unfinished edge
facing up
NOTE: Support rail (F)
can be fastened in the
back location according
to your preference.
G
G
F
back of
bottom side panels (G)
H 2
H 2
H 2

Pg 8 of 38 1-800-892-3986 IS9949
G
Step 2 - Attaching the Lower Support Rail.
F
G
• Place the bottom assembly in the desired location. NOTE: If the unit does not fit around your toilet to your satisfaction,
you can add the leg extensions (H).
• Install the other support rail (F) with the unfinished edge facing down.
x 4
H 1
H 2
H 2
Unfinished edge
of the support rail (F)
faces down.

STOP
Pg 9 of 38 1-800-892-3986 IS9949
Fig. 1
For doors (D) located at the MIDDLE,
go to step 3.1-MIDDLE, page 10.
Fig. 2
For doors located in the TOP,
go to step 3.1-TOP, page 11.
DD
DD
C-L C-R C-L C-R
!! SELECT DOOR LOCATION !!

Pg 10 of 38 1-800-892-3986 IS9949
Step 3.1-MIDDLE - Cabinet Assembly for MIDDLE DOOR installation option.
Magnet holes facing DOWN
on the fixed shelf (B).
B
B
C-L
C-R
Magnet holes facing UP
on the fixed shelf (B).
Three holes at the
BOTTOM.
finished edge
Magnet holes facing UP
on the top shelf (A).
A
C-L
C-R
Step 3.2-MIDDLE - Cabinet Assembly for MIDDLE DOOR installation option.
H 1 H 2 x 4
x 8
H 1 H 2
H 2
H 2
H 2
H 2
• NOTE: Do NOT fully tighten side panels (C-L and C-R) to the fixed shelves (B).
Now skip to step 4, page 12.

Pg 11 of 38 1-800-892-3986 IS9949
Step 3-1 - Cabinet Assembly for TOP DOOR installation option.
Magnet holes facing UP
on fixed shelf (B).
Magnet holes facing DOWN
on fixed shelf (B).
B
B
C-L
C-R
Three holes at the
BOTTOM.
finished edge
Magnet holes facing DOWN
on the top shelf (A).
A
C-L
C-R
Step 3-2 - Cabinet Assembly for TOP DOOR installation option.
H 1 H 2 x 4
H 2
H 2
H 2
H 2
x 8
H 1 H 2
• NOTE: Do NOT fully tighten side panels (C-L and C-R) to the fixed shelves (B).

Pg 12 of 38 1-800-892-3986 IS9949
Step 4 - Attaching the Bottom Panel.
H 1 H 2 x 4
Magnet holes facing DOWN
on the bottom shelf (A).
A
C-L
C-R
Step 5 - Installing the Cambolts.
x 2
H 4
H 2
H 2
H 4
H 4
• NOTE: DO NOT OVERTIGHTEN CAMBOLTS (H4)!

Pg 13 of 38 1-800-892-3986 IS9949
Step 6 - Attaching the Back Panel.
E
x 20
H 3
• Lay the unit face down on floor with the unfinished edges facing up.
• Fasten back panel (E) to back of unit.
• Helpful Hint: With the seam side of back panel facing up align the back panel properly, fasten a nail in
each of the corners of the back panel first.
unfinished edges
unfinished edges

Pg 14 of 38 1-800-892-3986 IS9949
Step 7 - Attaching the Top assembly to the Bottom assembly.
RECOMMEND
x 2
H 5
• Carefully place the top assembly onto the bottom assembly. NOTE: Be sure to align the cambolts (H4) with
the holes in bottom side panels (G).
• Insert snap cams (H5) into the holes in the bottom side panels (G). NOTE: If necessary, lightly tap the
snap cams with a hammer.
top assembly
bottom assembly
G
H 5

Pg 15 of 38 1-800-892-3986 IS9949
Step 8 - Installing the TOP Hinges.
unfinished edge
H 14
H 13
H 7
H 8
x 2
x 2
x 2
x 2
unfinished edge H 13
H 14
Incorrect!!
Correct!!
D
D
D
H 8
H 7
H 8
H 7
D
H 8
H 7

Pg 16 of 38 1-800-892-3986 IS9949
Step 9 - Installing the Magnet.
B
B
B
x 4
x 1
x 2
H 10
H 6
H 9
H 9
Assembly for TOP DOOR installation option.
H 6
H 10
H 9
H 6
A
B
RECOMMEND

Pg 17 of 38 1-800-892-3986 IS9949
Step 10 - Attaching the Doors.
D
B
B
D
D
H 7
H 8
x 2
x 2
H 11
H 12
x 2
x 2
• Set the left side door into the top hinge bushing.
• Fit bottom hinge (H7) into the bottom hinge bushing and fasten the bottom hinge (H7) to the door (D).
• Attach door knob (H11) to the door (D).
• Repeat for the right side door (D).
H 12
H 11
H 8
H 7

Pg 18 of 38 1-800-892-3986 IS9949
Apply stickers (H16)
to unused holes.
Step 11 - Attaching Screw Caps.
x 3
x 16
H 15 H 16
H 15
• NOTE: Make sure to FULLY TIGHTEN the large screws (H-2) that connect the side panels (C-L and C-R) to the
fixed shelves (B).
FULLY TIGHTEN the
large screws (H2)
C-L
C-R

Pg 19 of 38 1-800-892-3986 IS9949
Not Included
Top of the unit
Step 12 - Mounting the unit to the wall.
RECOMMEND WARNING:
BEFORE CUTTING OR DRILLING INTO ANY WALL SURFACE, VERIFY THE LOCATION OF ELECTRICAL,
PLUMBING AND GAS LINES. CUTTING ANY OF THESE MAY CAUSE SERIOUS INJURY.
• It is imperative that the unit be fastened to the wall for safety and stability.
• For safety reasons, it is imperative to use a stepladder.
• Fasten the nylon strap to the top of the unit using one washer and the anti-tip screw.
• Fasten nylon strap to wall, using appropriate mounting hardware (not provided).
• NOTE: We recommend using a mounting screw of at least two inches in length. If you do not screw directly into
wall studs, appropriate wall anchors should be used.
Anti-tip Screw
Washers
Nylon Strap
Wall Mount Kit
Anti-tip Screw
Washers
Nylon Strap

Pg 20 of 38 1-800-892-3986 IS9949
Instrucciones de Ensamblado / Instructions de montage
Modelo / Modèle 9409WWWM (Blanco / blanc)
Ubicación del riel de
soporte (F) en la parte
delantera o posterior
Emplacement du rail
de support (F) pour
l’avant ou l’arrière
Antes de que empiece:
Muchas gracias por comprar este producto. Identifique todas las piezas y las piezas
de ferretería antes de comenzar. Al distribuir las piezas, colóquelas sobre una
superficie suave para evitar que se rayen.
Si faltaran piezas, llame a nuestro número gratuito 1-800-892-3986 entre las 8:00
a.m.- 5:00 p.m., hora del este, de lunes a viernes.
Avant de commencer :
Merci d’avoir acheté ce produit. Veuillez identifier toutes les pièces et les acces-
soires de montage avant de commencer. Lorsque vous déballez les pièces,
placez-les sur une surface non rugueuse afin d’éviter les éraflures.
S’il venait à vous manquer des pièces, appelez notre numéro sans frais
1.800.892.3986 entre 8 h et 17 h (heure de l’Est des États-Unis), du lundi au vendredi.