Mainstays MS16-D4-1007-01 User manual

1PB
model# MS16-D4-1007-01
Lot#_________Date________
Customer Service:
1.877.436.7290
[email protected]
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Manufactured By:
BDDMI
1321 Tyler St NE, Minneapolis, MN 55413
Assembly Instructions
STACK STORAGE UNIT

2
SIDE PANEL A
SIDE PANEL B
BOTTOM PANEL C
TOP PANEL D
BACK PANEL E
SIDE PANEL F
SIDE PANEL G
BOTTOM PANEL H
TOP PANEL I
SIDE PANEL J
SIDE PANEL K
A
B
C
D
E
F
G
H
I
J
K
BOTTOM PANEL L
TOP PANEL M
BACK PANEL N
SIDE PANEL O
TOP PANEL P
BOTTOM PANEL Q
BACK PANEL R
TOP PANEL S
BOTTOM PANEL T
FOOT [X8]
L
M
N
O
P
Q
R
S
T
U
Before you begin:
1. Check for damaged or missing parts.
2. Use the carton as a working surface to prevent product damage during assembly.
3. A second person is recommended for assembly.
TOOLS NEEDED
Hammer Flat Head Screwdriver Phillips Head Screwdriver
PARTS LIST

2 3
HARDWARE LIST
CAUTION:
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten bolts.
5. Allen Wrench
x2
3. Cam Bolt
x40
4. Cam
x40
1. Large Wooden Dowel
x40
2. Small Wooden Dowel
x8
6. Bolt
x9

4
HARDWARE LIST
CAUTION:
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten bolts.
11. Washer
x2
9. Brown Cam Cover
x10
10. White Cam Cover
x21
7. Binding Bolt
x9
8. Black Cam Cover
x22
12. Wall Anchor
x1

4 5
HARDWARE LIST
CAUTION:
1. Make sure the screws go through the pre-drilled holes properly.
2. Do not over tighten bolts.
15. Wall Screw
x1
13. Wall Strap
x1
14. Truss Head Screw
x1

6
1 2
3 4 5
180º
HOW TO USE THE CAM LOCK SYSTEM

6 7
x4 x4 x4 x4
STEP 1
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 10. White
Cam Cover

8
x4 x4 x4 x4
STEP 2
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 10. White
Cam Cover

8 9
x4 x4 x4 x4
STEP 3
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 8. Black Cam
Cover

10
x4 x4 x4 x4
STEP 4
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 8. Black Cam
Cover

10 11
x4 x4 x4 x4
STEP 5
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 8. Black Cam
Cover

12
x4 x4 x4 x4
STEP 6
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 8. Black Cam
Cover

12 13
x4 x4 x4 x4
STEP 7
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 9. Brown
Cam Cover

14
x4 x4 x4 x4
STEP 8
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 9. Brown
Cam Cover

14 15
x8 x8 x8 x8
STEP 9
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Screw-In cam bolts must be screwed down ush.
3. Refer to page 6 for instructions on how to use the cam lock system.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Large
Wooden
D o w e l
3. Cam Bolt 4. Cam 10. White
Cam Cover

16
x2 x2 x2
x2 x2
x2
8
10
STEP 10
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Make sure the bolts go through the pre-drilled holes properly.
3. Do not over tighten bolts.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
2. Small
Wooden
D o w e l
5. Allen
Wrench
10. White
Cam Cover
7. Binding
Bolt
8. Black Cam
Cover
6. Bolt

16 17
x2 x2 x2
x2 x2
x2
10
8
STEP 11
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Make sure the bolts go through the pre-drilled holes properly.
3. Do not over tighten bolts.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
2. Small
Wooden
D o w e l
5. Allen
Wrench
10. White
Cam Cover
7. Binding
Bolt
8. Black Cam
Cover
6. Bolt

18
x2 x2 x2
x2
x2
STEP 12
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Make sure the bolts go through the pre-drilled holes properly.
3. Do not over tighten bolts.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
5. Allen
Wrench
9. Brown
Cam Cover
7. Binding
Bolt
6. Bolt2. Small
Wooden
D o w e l

18 19
x2 x2 x3
x2 x1
x3
8
10
STEP 13
1. Carefully tap small wooden dowels into place. Leave 1/2”of the dowels sticking out.
2. Make sure the bolts go through the pre-drilled holes properly.
3. Do not over tighten bolts.
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
2. Small
Wooden
D o w e l
5. Allen
Wrench
10. White
Cam Cover
7. Binding
Bolt
8. Black Cam
Cover
6. Bolt

20
12
15
11
14
11
13
x1
x1x1x1
x2
STEP 14
position against wall
mark position of strap hole on wall
drill 1/4”hole
tap in wall anchor
fasten anti-tip strap with wall
screw provided
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
14. Truss
Head Screw
15. Wall
Screw
13. Wall
Strap
11. Washer
12. Wall
Anchor