Makita DFN350 User manual

DFN350
EN Cordless Brad Nailer INSTRUCTION MANUAL 5
PL Sztyfciarka Akumulatorowa INSTRUKCJA OBSŁUGI 11
HU Akkumulátoros szögbelövő
fej nélküli szögekhez HASZNÁLATI KÉZIKÖNYV 17
SK Akumulátorová klincovačka NÁVOD NA OBSLUHU 23
CS Akumulátorová hřebíkovačka
na kolářské hřebíky NÁVOD K OBSLUZE 29
UK Акумуляторний
цвяхозабивний пістолет ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ 35
RO Pistol de bătut cuie fără cap,
cu acumulator MANUAL DE INSTRUCŢIUNI 42
DE Akku-Nagler BETRIEBSANLEITUNG 48

1
2
3
Fig.1
1
2
Fig.2
1
2
Fig.3
A
B
Fig.4
BA
1
Fig.5
23
1
Fig.6
1
Fig.7
34
2
1
Fig.8
2

2
1
3
Fig.9
1
2
Fig.10
Fig.11
1
2
3
Fig.12
1
Fig.13
1
2
4
3
Fig.14
1
2
Fig.15
Fig.16
3

Fig.17
1
2
Fig.18
2
1
Fig.19
4

5ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DFN350
Nail size 18Ga x 15, 20, 25, 30, 35 mm
Nail magazine capacity 100 pcs.
Dimensions with BL1860B, without hook (L x W x H) 257 mm x 79 mm x 228 mm
Rated voltage D.C. 18 V
Net weight 2.1 - 2.4 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
estcombinations,accordingtoEPTA-Procedure01/2014,areshowninthetable.
Applicable battery cartridge
BL1815/BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/BL1840B/BL1850/BL1850B/BL1860B
• Someofthebatterycartridgeslistedabovemaynotbeavailabledependingonyourregionofresidence.
WARNING: Only use the battery cartridges listed above.Useofanyotherbatterycartridgesmaycause
injuryand/orre.
Intended use
The tool is intended for fastening soft wood.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745-2-16:
Sound pressure level (LpA):81dB(A)
Sound power level (LWA):92dB(A)
Uncertainty(K):3dB(A)
NOTE: The declared noise emission value(s) has
beenmeasuredinaccordancewithastandardtest
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
Thevibrationtotalvaluedeterminedaccordingto
EN60745-2-16:
Vibrationemission(ah):2.5m/s2or less
Uncertainty(K):1.5m/s2
NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.