Makita HR5210C User manual

2" ROTARY HAMMER
OUTPERFORMS THE REST
INNOVATION
INNOVATION
AVT (Anti-Vibration Technology) active
dynamic vibration absorber ensures
extra-low vibration performance
DURABILITY
DURABILITY
Built-in torque limiter ensures
stable torque control
POWER
POWER
Synchronized RPM and BPM prevents
overlapping impacts for up to 50%
more efficient drilling
ANTI-VIBRATION TECHNOLOGY FOR INCREASED END-USER COMFORT
Dual Mode Operation“Hammering with Rotation & Hammering Only” for
Multiple Applications
Electronic Speed Control Reduces Speed Loss when Working in Heavy
Applications to Ensure Maximum Productivity
Extended Service Life of Carbon Brushes is Greater than Twice that of
Competitive Models
ANTI-VIBRATION TECHNOLOGY FOR INCREASED END-USER COMFORT
Dual Mode Operation“Hammering with Rotation & Hammering Only” for
Multiple Applications
Electronic Speed Control Reduces Speed Loss when Working in Heavy
Applications to Ensure Maximum Productivity
Extended Service Life of Carbon Brushes is Greater than Twice that of
Competitive Models
makitatools.com
PERFORMANCE
PERFORMANCE
Electronic variable speed control by dial
as well as L.E.D. lights that indicate brush
wear and electrical circuit problems
Spring Balancer Spring
Makita’s
Efficient
Hammering
Competitor’s
Inefficient
Hammering
Reinforcing Bar
Model
HR5210C
Model
HR5210C

All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0907-4M MA-0776-07 For more information, call 1-800-4MAKITA or visit makitatools.com Makita U.S.A.,14930 Northam St.,La Mirada, CA 90638
Model HR5210C
2" ROTARY HAMMER
Makita offers a wide variety of Rotary Hammer accessories. For a complete listing, please refer to the Makita
General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.
FEATURES & BENEFITS
FEATURES & BENEFITS
STANDARD EQUIPMENT
STANDARD EQUIPMENT
■Powerful 15 AMP motor; 1,075 - 2,150 BPM to handle the most
demanding jobs
■No hammering while idling ensures longer life and greater
performance of the tool
■One touch sliding chuck allows for quick bit changes increasing
end-user productivity
■Soft grip provides more comfort and greater control when
operating the tool
■Recessed operation mode switch helps prevent it from being damaged
■Built-in torque limiter ensures stable torque control
■Side handle (158131-0)
■D-handle (417003-1)
■Depth gauge (321248-4)
■Plastic tool case (158275-6)
■Bit grease (181573-3)
SPECIFICATIONS
SPECIFICATIONS
Capacities: Concrete 2"
Core bit 6-1/4"
No load speed (RPM) 0 - 260
Blows per minute (BPM) 1,075 - 2,150
AMPS (110V) 15.0
Overall length 23-1/2"
Net weight 25.6 lbs.
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
HR5210C
■4-Cutter technology for reduced friction and rapid dust removal
■Central guiding action for accurate holes
■Constructed to reduce vibration and noise emissions
■Made of the highest quality chrome-nickel-molybdenum steel
■Special impact-grade carbide
SDS-Max Bits - 4 Cutter
■For use in reinforced and non-reinforced concrete, block, brick, etc.
■Specially designed carbide tip geometry for increased penetration
■Core body length: 6"
■Usable drilling depth: 4-3/8"
■From 1" to 5" diameter
Modular Heavy-Duty Core Bit System