10 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
with this power tool. Failure to follow all instructions
Save all warnings and instruc-
tions for future reference.
Cordless Hedge Trimmer Safety Warnings
1. Keep all parts of the body away from the blade.
Do not remove cut material or hold material
to be cut when blades are moving. Blades
moment of inattention while operating the hedge
2. Carry the hedge trimmer by the handle with the
blade stopped and taking care not to operate
any power switch.
trimmer will decrease the risk of inadvertent start-
3. When transporting or storing the hedge trim-
Proper handling
of the hedge trimmer will decrease the risk of
4. When clearing jammed material or servicing
and the battery pack is removed or discon-
nected. Unexpected actuation of the hedge trim-
5.
Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring.
make exposed metal parts of the hedge trimmer
"live" and could give the operator an electric shock.
6. Keep all power cords and cables away from
cutting area.-
7.
Do not use the hedge trimmer in bad weather con-
ditions, especially when there is a risk of lightning.
Additional Safety Instructions
Preparation
1. Check the hedges and bushes for foreign
objects, such as wire fences or hidden wiring
before operating the tool.
2. The tool must not be used by children or
young persons under 18 years of age. Young
under the supervision of an expert.
3. First-time users should have an experienced
user show them how to use the tool.
4. Use the tool only if you are in good physical
condition.
parties.
5.
alcohol, drugs or medication.
6. Work gloves of stout leather are part of the
basic equipment of the tool and must always
be worn when working with it. Also wear
sturdy shoes with anti-skid soles.
7. Before starting work check to make sure that
the tool is in good and safe working order.
must not be used unless fully assembled.
Operation
1.
using the tool.
2. The tool is intended to be used by the operator
at ground level. Do not use the tool on ladders
or any other unstable support.
3.
DANGER - Keep hands away from blade. Contact
4. Do not use the tool in the rain or in wet or
very damp conditions. The electric motor is not
waterproof.
5. Make sure you have a secure footing before
starting operation.
6. Do not operate the tool at no-load
unnecessarily.
7.
battery cartridge if the shear blades should
come into contact with a fence or other hard
object. Check the blades for damage, and if
damaged, replace the blades immediately.
Before checking the shear blades, taking care
of faults, or removing material caught in the
remove the battery cartridge.
9. Never point the shear blades to yourself or
others.
10. If the blades stop moving due to the stuck of
foreign objects between the blades during
battery cartridge, and then remove the foreign
objects using tools such as pliers. Removing
-
11. Avoid dangerous environment. Don't use the
tool in damp or wet locations or expose it to
rain. Water entering the tool will increase the
risk of electric shock.
12. When you use the tool on muddy ground, wet
slope, or slippery place, pay attention to your
footing.
13. Avoid working in poor environment where
increased user fatigue is expected.
14. Do not use the tool in bad weather where visi-
bility is limited.
