Marathon HOTEL COLLECTION User manual

WIRELESS FAST DUAL CHARGING CLOCK
USER MANUAL
HORLOGE À DOUBLE RECHARGE RAPIDE
SANS FIL MODE D’EMPLOI
OROLOGIO A DOPPIA RICARICA VELOCE E
SENZA FILI ISTRUZIONI PER L’USO
INSTRUCCIONES DE FUNCIONAMIENTO DEL
RELOJ INALÁMBRICO DE CARGA DUAL RÁPIDA
SCHNELLER DRAHTLOSER DOPPELTER
LADETAKT BENUTZERHANDBUCH

OVERVIEW
A2 A7 B1A3A1 A6
A4 A5
B2A10A9A8
Part A – Front and Back
A1: Time
A2: Icon
A3: Icon
A4: Icon
A5: Alarm Time
A6: Icon
A7: Icon
A8: USB Port
A9: A/C Adapter Jack
A10: Button
Part B – Sides
B1: Switch
B2: /
Switch

EN
C2 D1
C4C3C1
FEATURES
• Qi wireless charging: Simply place any Qi enabled
wireless charging device on the charging pad. No
cable connection required.
• Digital clock with daily alarm function.
• Crisp and vibrant full colour LED display.
POWER SOURCE
This unit uses 1 A/C power adapter and 1 x CR2032
battery for backup.
Part C – Top
C1: Button
C2: Charging Pad
C3:
Button
C4: Button
Part D – Bottom
D1: Battery Compartment

GETTING STARTED
1. Plug in the A/C adaptor into the adaptor jack (A9),
remove the battery tag from the rear compartment
(D1) to activate the clock backup battery which is
 alreadyinstalledintheclockwhenyourst
receive it.
2. When both the A/C adaptor and CR2032 battery
have been installed, the unit will automatically
switch to the external power supply.
3. The CR2032 battery will store all programmed
settings in case the A/C adapter is unplugged. If the
CR2032 battery is removed, all programmed
settings will be lost immediately when the A/C
adapter is unplugged.
NOTE: The clock will not operate without the
A/C adapter.
SETTING THE TIME
Hold the (C3) button for 2 seconds to
select time display in 12-hour or 24-hour format.
1. Slide / switch (B2) to to
enter time setting mode.
2. Press or button (C1 or C4) to adjust the time
setting. Press and hold the or button to speed
up the rate at which the value changes.
3. Slide / switch (B2) to LOCK to
 conrmthecurrentdisplayedsettings.
NOTE: The HOUR value CANNOT be adjusted directly.
The HOUR value can only be changed through the
adjustment of the MINUTE value.

DAYLIGHT SAVINGS TIME (DST)
• To activate daylight savings time for the clock, press
the button (A10). You will note that on the
display, the time (A1) will increase by 1 hour and the
icon (A3) will appear.
• To deactivate daylight savings time, press the
button (A10). You will note that on the display, the
time (A1) will decrease by 1 hour and the icon
(A3) will disappear.
SETTING THE ALARM
1. Slide / switch (B2) to to
enter alarm setting mode.
2. Press or button (C1 or C4) to adjust the alarm
time setting, slide / switch (B2) to
LOCKtoconrmsetting.
3. Press and hold the or button to speed up the
rate at which the value changes.
NOTE: The HOUR value CANNOT be adjusted directly.
The HOUR value can only be changed through the
adjustment of the MINUTE value.
USING THE ALARM AND SNOOZE
FUNCTION
1. Slide switch (B1) to activate or deactivate the
alarm function. There are three options: HI (alarm
sound will be louder), LO (alarm sound will be
quieter), OFF (alarm will not sound at all).
2. When the alarm function is activated, the icon
(A4) will appear on the display.
3. When the alarm sounds, press the
button (C3) to pause it and enter snooze mode
which will delay the alarm for 5 minutes.
EN