Marquee 0177357 User manual

STEEL EXPANDABLE GAZEBO
ITEM NO. 0177357
Steel Frame
Gazebo Size: 295W x 303D x 242H cm
Expands up to 570cm with handy leg mounted guide wheels
Powder coated frame – Charcoal
180GSM Polyester roof with 50 UV rating
242cm
570cm
262cm
295cm

Safety and care advice
Check that you have all the components and appropriate tools listed in this booklet before starting assembly.
Remove all fittings from their plastic bags and separate them into their groups.
Keep children and animals away from the work area; small parts could pose a choking hazard.
Make sure you have enough space to lay out the parts before starting.
Do not stand or put weight on the component parts during assembly, this could cause damage.
Assemble on a soft, level surface, to avoid damaging the unit or your floor.
Do not assemble or dismantle during strong winds.
This unit is not a permanent fixture – Do not use or leave erected in windy conditions.
Follow all safety and fire precautions when in or near this gazebo.
Please note that this gazebo is not waterproof.
Ensure the ground is level free, from debris and sharp objects that could damage the fabric. Avoid pitching under
trees but make use of any nature wind breaks such as hedge rows etc. Heavy winds and rain could damage the
gazebo.
Important information
Take care when dismantling the gazebo. Follow the assembly instructions in the reverse order and do not force the
frame.
Never remove the pegs by pulling on the guy ropes, fabric or gazebo legs.
Ensure all parts of the gazebo are completely dry before repacking.
Never use abrasive cleaners or detergents.
The canopy of this gazebo is not fire proof.
Do not use naked flames in or around the gazebo – there is no cooking area within the gazebo.
Do not store cooking apparatus, BBQs etc. within the gazebo as it may cause a fire hazard.
Do not smoke or allow smoking in or around the gazebo.
1

Components
NO.
A
PARTS PARTS LIST QTY
PCS
Leg pole 4
B1 Leg pole 1
B2 Leg pole 1
C Top pole 1
1D Top pole
3E Top pole
1F Top pole
NO.
G
PARTS PARTS LIST QTY
PCS
Top pole 1
H Support pole 1
I Support pole 1
J Support pole 1
4K Support pole
8L Sling tube
2

Components
M6*15
A large top cloth
A small top cloth
M6*50
NO.
M
PARTS PARTS LIST QTY
PCS
Base plate 4
NWheel 2
ORolling
bracket 4
PBig canopy 1
1Q Small canopy
AA Screw 138
BB Screw 8
M6
NO.
CC
PARTS PARTS LIST QTY
PCS
Allen key 1
DD Peg 12
HH Plastic washer 6
EE Metal plate 2
4FF Butterfly
screw
GG Washer 4
3

Assembly Instructions
Step 1
Step 2
Step 1:
Attach the base plates (M) to the two leg
poles(A). Secure using screws (AA). Then
insert screws (AA) and plastic washer (HH)
into the leg pole (B1/B2) as pictured. The
wheels (N) can then be added to the base
of the leg poles (B1/B2).
Step 2:
Use screws (AA) to connect two leg poles
(A) with the top pole (D). Then connect
each top pole(E) to the assembled frame (D
& A), using screws (AA). You will now need
two people to hold the frame while you
attach the other leg poles (A) to the other
end of the top poles (E). Secure these
using screws (AA).Then connect the top
pole(C) to the assembled frame with
screws (AA).
4

Step 3
Step 4
Step 3:
Secure poles (K) to the top support frames
using screws (AA). Then use the screws
(BB) to secure the cross poles (I) with top
pole (E).
Step 4:
Insert the sling tube (L) in the small roof
canopy (Q). Then use the screws (AA) to
connect the roof canopy with the top
support poles. Insert 2 or 3 screws on each
side before securing the rest of the
screws. Step ladders will be required to
safely complete this step.
5

Step 5
Step 6
Step 5:
To assemble the second roof frame, secure
pole (K) with the top poles (F & G) using
screws (AA). Then use screws (BB) to
connect the final support pole (H) to the
top poles (F & G).
Step 6:
Use screws (BB) to connect the support
pole (J) to the support pole (H).
6

Step 7
Step 8
Step 7:
The second roof panel needs to be placed
on top of the roof and legs assembled in
the earlier steps. Attach rolling brackets(O)
to the two assembled roof panels as
pictured, using screws (AA).
Step 8:
Connect the top pole(E) with the leg poles
(B1 & B2), using screws (AA).
7

Step 9
Step 10
Step 9:
Connect the frame assembled in step 8 to
the second roof panel using screws (AA).
Then use screws (BB) to fix the support
pole (J) with each end of the top pole (E).
Step 10:
Expand the gazebo like the photo shown.Then
Insert screws (AA) and plastic washer (HH)
into the top pole as pictured.
8

Step 11
Step 12
Step 11:
Insert the sling tube (L) into the large roof
canopy (P). Then use the screws (AA) to
connect the roof canopy with the top
support poles. Insert 2 or 3 screws on each
side before securing the rest of the
screws. Step ladders will be required to
safely complete this step.
Step 12:
Ensure all screws used to fasten down the
roof canopies are tightened securely. Then
attach the metal plate (EE) on the legs
poles (B1 & B2) using butterfly screws (FF)
and washers (GG).
When you want to expand your gazebo,
unlock the wheels by releasing the brakes.
Carefully expand out the roof to your
desired distance and lock the wheels in
place. Depending on your ground surface,
you can secure the gazebo further, by
hammering pegs (DD) through the metal
bases (EE).
9