Marquee JOLIE 0258236 User manual

1
ASSEMBLY INSTRUCTION
Item No.: 0258236 / 0258237
JOLIE 3PCE BISTRO SET

2
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4. WASHERS MUST BE USED.
5. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE ATTACHED.
6. AT THE END OF THE ASSEMBLY TIGHTEN EACH SCREW AND NUT SECURELY BUT BE CAREFUL NOT TO OVER TIGHTEN, TO AVOID DAMAGE.
x2
ASSEMBLY INSTRUCTION
Item No.: 0258236 / 0258237
JOLIE 3PCE BISTRO SET
Ax1
Dx4 E x1 F x5 Gx1 Hx1 I x1
Cx1Bx1

Turn the table upside down on a clean protected surface.
Attach the leg (C) to the table top (A), using bolts (D) and
washer (F). Tighten securely with Allen Key (H).
Join the two legs together (C&B) using screw and nut
(E&G) and washer (F&I). Tighten securely using Allen
Key (H).
Turn upside down your table, now it is ready to use.
Repeat step 1 to secure the other leg (B) as
pictured.
3
CARE AND CLEANING:
1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS ON FRAME PARTS,WICKER AND CUSHIONS.
2.DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT YOUR SETTING CAN BE STORED IN A DRY
AREA WITH A SUITABLE COVER. BEFORE STORAGE,PLEASE ENSURE ITIS CLEAN AND DRY.
3.IN THE EVENT OF BARE METAL SHOWING DUE TO A SCRATCH,ITIS RECOMMENDED TO TREAT WITH A RUST REPELLANT VARNISH OR SIMILAR.
4.PERIODICALLY CHECK AND ENSURE THAT ALL THE SCREWS ARE SECURELY TIGHTENED.
5.AMATCHING FURNITURE COVER IS STRONGLY RECOMMENDED TO EXTEND THE USAGE LIFE-SPAN.
1 2
3 4
A
D
F
E
F
G
I
H
H
D
F
H
B
B
C
C