Marquee 0263655 User manual

1
SHELL 4 PCE RESIN WICKER SETTING
ASSEMBLY INSTRUCTION
Item No.: 0263655 / 0263656 / 0263658

2
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4. WASHERS MUST BE USED.
5. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE ATTACHED.
6. AT THE END OF THE ASSEMBLY PROCESS TIGHTEN EACH SCREW AND NUT SECURELY BUT BE CAREFUL NOT TO OVER TIGHTEN, TO AVOID
DAMAGE.
x1
Ax1 Bx2 Cx2
SHELL 4 PCE RESIN WICKER SETTING
ASSEMBLY INSTRUCTION
Item No.: 0263655 / 0263656 / 0263658

Carefully turn over your seat (A) on a clean
and protected surface. Attach the front leg
(B) and rear leg (C) to the seat by screwing
each leg on as pictured.
Carefully turn over your assembled chair
and place in the desired area.Unscrew
the height adjustable feet as necessary to
level the chair.
1
2
CARE AND CLEANING:
1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS ON FRAME PARTS OR WICKER.
2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT YOUR SETTING CAN BE.STORED IN A DRY
AREA WITH A SUITABLE COVER. BEFORE STORAGE,PLEASE ENSURE IT IS CLEAN AND DRY.
3. IN THE EVENT OF BARE METAL SHOWING DUE TO A SCRATCH,IT IS RECOMMENDED TO TREAT WITH A RUST REPELLANT VARNISH OR SIMILAR.
4. PERIODICALLY CHECK AND ENSURE THAT ALL THE SCREWS ARE SECURELY TIGHTEN.
5. A MATCHING FURNITURE COVER IS STRONGLY RECOMMENDED TO EXTEND THE USAGE LIFE-SPAN.
A
C
C
B
B

1
SHELL 4 PCE RESIN WICKER SETTING
ASSEMBLY INSTRUCTION
Item No.: 0263655 / 0263656 / 0263658

2
Ax1
Dx4 Ex1 Fx4 Gx1 Hx1
Bx1
x1
1.PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2.TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3.PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4.WASHERS MUST BE USED.
5.DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE ATTACHED.
6.AT THE END OF THE ASSEMBLY PROCESS TIGHTEN EACH SCREW AND NUT SECURELY BUT BE CAREFU;;L NOT TO OVER TIGHTEN, TO AVOID DAMAGE.
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
Cx1
SHELL 4 PCE RESIN WICKER SETTING
ASSEMBLY INSTRUCTION
Item No.: 0263655 / 0263656 / 0263658

3
1
2
3
CARE AND CLEANING:
1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS ON FRAME PARTS.
2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT YOUR SETTING CAN BE STORED IN A
DRY AREA WITH A SUITABLE COVER. BEFORE STORAGE,PLEASE ENSURE IT IS CLEAN AND DRY.
3. IN THE EVENT OF BARE METAL SHOWING DUE TO A SCRATCH,IT IS RECOMMENDED TO TREAT WITH A RUST REPELLANT OR SIMILAR.
4. PERIODICALLY CHECK AND ENSURE THAT ALL THE SCREWS ARE SECURELY TIGHTEN.
5. A MATCHING FURNITURE COVER IS STRONGLY RECOMMENDED TO EXTEND THE USAGE LIFE-SPAN.
A
B
C
D
F
A
B
C
H
E
G
H
Secure table leg (B) (C) to
table top (A) using bolts
(D) and washers (F) with
Allen Key (H) as pictured.
Fix leg (B) (C) tightly
using bolts (E) and cap
(G) with Allen Key (H)
as pictured.
Turn over your table and unscrew the height
adjustable feet as necessary to level the table.

1
SHELL 4 PCE RESIN WICKER SETTING
ASSEMBLY INSTRUCTION
Item No.: 0263655 / 0263656 / 0263658

2
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4. WASHERS MUST BE USED.
5. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE ATTACHED.
6. AT THE END OF THE ASSEMBLY PROCESS TIGHTEN EACH SCREW AND NUT SECURELY BUT BE CAREFUL NOT TO OVER TIGHTEN, TO AVOID
DAMAGE.
x1
Ax1Bx2Cx2Dx1
Ex2 Fx2 Gx1
SHELL 4 PCE RESIN WICKER SETTING
ASSEMBLY INSTRUCTION
Item No.: 0263655 / 0263656 / 0263658

3
1
3
2
CARE AND CLEANING:
1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS OR WICKER.
2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT YOUR SETTING CAN BE.STORED IN A DRY
AREA WITH A SUITABLE COVER.BEFORE STORAGE,PLEASE ENSURE IT IS CLEAN AND DRY.
3. IN THE EVENT OF BARE METAL SHOWING DUE TO A SCRATCH,IT IS RECOMMENDED TO TREAT WITH A RUST REPELLANT VARNISH OR SIMILAR.
4. PERIODICALLY CHECK AND ENSURE THAT ALL THE SCREWS ARE SECURELY TIGHTEN.
5. A MATCHING FURNITURE COVER IS STRONGLY RECOMMENDED TO EXTEND THE USAGE LIFE-SPAN.
D
E
F
G
A
C
B
C
B
A
Carefully turn over your seat (A) on a clean and protected surface. Attach
the front leg (B) and rear leg (C) to the seat by screwing each leg on as
pictured
Secure support leg (D) to
seat (A) using bolts (E)
and washers (F) with
Allen KKKKKKKKKKKKKKKKKKJKkey (G) as pictured.
Carefully turn over your assembled chair
and place in the desired area. Unscrew
the height adjustable feet as necessary
to level the chair.