Massoth LGB 2x98x Saxonian IK User manual

Umbaubericht
Lokomotiven
LGB 2x98x Saxonian IK
Backfitting plan for the Saxonian IK with a LS Decoder.
Needed parts:
1x 8211098 LS-So nddecoder IK
1x 8241010 Speaker Massoth: 8 Ohm, 3 Watt, 57 mm
Some small parts from the j nk box: Screws, Washers
Conversion of the locomotive:
•The fine parts above sho ld be s btracted before to avoid damaging it.
•Disasemble loco, first remove 6 screws as shown in fig re 1.
Then yo can p ll o t the gear easily (not complete!) and yet, as in Fig res 2 and 3 solve the other 3
screws.
Fig re-1: Removing the first 6 screws.
Stand 17.04.2020 Seite 1 / 4

Umbaubericht
Lokomotiven
Fig re-2: Removing the rear 2 screws nder the gear.
Stand 17.04.2020 Seite 2 / 4

Umbaubericht
Lokomotiven
Fig re-3: Removing the front screw nder the gear.
Then as shown in Fig re 4 Insert the speaker into the holder provided with washers.
Now remove the j mper on LGB onboard adapter and attach cables to the LS as seen in the pict re.
Store the cord well.
Stand 17.04.2020 Seite 3 / 4

Umbaubericht
Lokomotiven
Fig re-4: F lly integrated electronics LS
Then screw together the locomotive again reversed.
Stand 17.04.2020 Seite 4 / 4