Matco Tools MSC4BK40 User manual

MSC4BK40 1 02/28/19
MSC4BK40
Quick Assembly Deluxe Service Cart With Power Prep 40th
Copyright © Professional Tool Products, 2019
All rights reserved
• Lock lid and drawers before moving. • Apply brake on locking casters anytime
cart is in place. • Do not pull cart. Push from handle on end to move. • Units
can tip or fall causing damage or personal injury. • Cart is designed to roll
easily on flat surfaces and should not be used on uneven or inclined surfaces.
• Do not open more than one loaded drawer at a time. • Do not stand on or
step in drawers. • Keep children away from unit. • Wear gloves when lifting
edges. • Before connecting to a power supply, always check to make sure the
power supply corresponds to the voltage required on the product. • Fully insert
plug to reduce the risk of electric shock. • Always unplug when not in use.
• Disconnect power before installing or servicing. • Do not try to plug in unit or
product when hands are wet or damp, or if standing on a wet or damp surface
or in water. • Never attempt to pick up unit or plugged in product that should fall
in standing water. • This unit is not waterproof and is intended for general use
indoors. • Do not use in potentially dangerous locations, such as flammable or
explosive atmospheres. • Keep cord away from heat, oil, sharp edges or moving
parts. • Failure to heed these warnings may result in personal injury and/or
property damage.
WARNING
SERVICE CART WEIGHT CAPACITY
Maximum Total Net Load ........................... 500 LBS
Top Lid of Cart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 LBS
Bottom Shelf ...................................... 150 LBS
3" Drawer(s) each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 LBS each
4" Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 LBS each
5" Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 LBS each
PLEASE NOTE: Loading cart beyond rated capacity may cause structural
damage to the cart as well as personal and /or property damage. Please
educate your customers to the dangers of overloading. Do not attempt to
push cart with items on the top lid.
WARNING
ASSEMBLY INSTRUCTIONS
FIG. 1
Installing 4 pc. caster (#18/#23) onto the bottom tray
(#17) with #19/#20/#21.

MSC4BK40 2 02/28/19
MSC4BK40
Quick Assembly Deluxe Service Cart With Power Prep 40th
ASSEMBLY INSTRUCTIONS
FIG. 2
Install leg/bumper(#10,#11) onto the cart body
(#8) and fasten with 6 blots (#30).
FIG. 3
Turn cart body 180º to install second leg/bumper (#10,#11)
onto the cart body (#8) and fasten with 6 blots (#30).

MSC4BK40 3 02/28/19
MSC4BK40
Quick Assembly Deluxe Service Cart With Power Prep 40th
ASSEMBLY INSTRUCTIONS
FIG. 5
Turn cart body 90° and fasten
remaining 8 bolts (#30).
FIG. 4
Turn cart body 90º to install 3rd and 4th leg/bumper(#10,#11)
onto the cart body (#8) and fasten with 6 blots (#30). Put
bottom tray w/casters (#17) onto the 4 legs and fasten with 8
bolts (#30)

MSC4BK40 4 02/28/19
MSC4BK40
Quick Assembly Deluxe Service Cart With Power Prep 40th
ASSEMBLY INSTRUCTIONS
FIG. 6
Mount the push handle (#7) to the same side of the
cart as the locking casters, using the four bolts (#6)
provided.
FIG. 7
Install Spray Can Divider (#16) onto the bottom tray

MSC4BK40 5 02/28/19
MSC4BK40
Quick Assembly Deluxe Service Cart With Power Prep 40th
PARTS DRAWING

MSC4BK40 6 02/28/19
MSC4BK40
Quick Assembly Deluxe Service Cart With Power Prep 40th
TROUBLESHOOTING
PARTS LIST AND PARTS DRAWING
Item No. Part No. No. Req'd Description
1 RS4RCP 1 Cord Rubber Protector
2 MSC4LIDBK9 1 Lid - Black
3 RSLMQPMBKN 1 Locking Mechanism (Excludes Lock) - Black
4 RSGP 2 Gas Piston (each)
5 RS4QPHBC 2 Handle Backets/ Pair with Hardware - Chrome
6 RS4QPHBKC 8 M8x19 Bolts w/ Plum Bolts - Chrome
7 RSMSC4HDL 1 Push Handle
8 1 Cart Body
9 RSLKB 1 Lock with keys
10 RSMSC4PLGBK 4 Leg/Each - Black
11 RSMSC4BP 1 Safety bumper (4pc)
12 MSC4PLD3BLR 1 3" Right Drawer - Blue
13 RSMSC4QSRPBK 2 Screwdriver/Prybar Holder - Black
14 RS4QPRC 4 Rubber Cushion
15 RSRBS 4 Roller Bearing Slides (pair)
16 RSMSC4SCDBK 1 Spray Can Divider - Black
17 MSC4QPBTBK 1 Bottom Tray - Black
18 RSSWLCS 2 5" Swivel Locking Caster / each
19 * 16 Washer
20 * 16 Spring Washer
21 * 16 M8 x 16 Bolt Kits
22 RSMSC4QPRPBK 2 Reinforced Piece / each - Black
23 RSSWCS 2 5" Swivel Caster Non-Locking / each
24 MSC4HC 1 6 Pc. Drawer Handles - Chrome
25 RSMSC4JBK 2 "J" Channel - Black (each)
26 RSMSC4CCPBK 1 Center Clip-on pcs/pair - Black
27 MSC4PLD5BL 1 5" Drawer - Blue
28 MSC4PLD4BL 1 4" Drawer - Blue
29 MSC4PLD3BLL 1 3" Left Drawer - Blue
30 RS4QPLHK 1 32 Pcs Leg Hardware Kit (M8 x 17)
* RS4QPCHK 16 Pcs Caster Hardware Kit (incl 19,20 & 21)
Also available:
RSRBSDET8PK Ball Bearing Slide Detents (Package of 8).
RSMSC46LK 6 Piece Liner Kit
MSC4FC Set of 2 Fixed 5" x 2" Casters (Optional - Not Included)
RSBKP Black Touch-Up Paint
RSMSC4BLU Blue Touch-Up Paint
Problem: Drawers appear not to fit, do not slide in accurately and bump the cart sides.
Solution: The roller bearing slides must be fully engaged into the mounting slots on all drawers. They potentially could fall out of position in shipment or
during assembly. Remove the drawer that is out of position. The drawer is removed by the two clips on the roller bearing slides. Simply push the roller
bearing slide back down into position. Insert the drawer back onto the roller bearing slides.