Matco tools Msc4rqp User manual

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP 1 06/06/18

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP

Quick Assembly Deluxe Service Cart With Power Prep

• Lock lid and drawers before moving. • Apply brake on locking casters anytime

cart is in place. • Do not pull cart. Push from handle on end to move. • Units

can tip or fall causing damage or personal injury. • Cart is designed to roll

easily on ﬂat surfaces and should not be used on uneven or inclined surfaces.

• Do not open more than one loaded drawer at a time. • Do not stand on or

step in drawers. • Keep children away from unit. • Wear gloves when lifting

edges. • Before connecting to a power supply, always check to make sure the

power supply corresponds to the voltage required on the product. • Fully insert

plug to reduce the risk of electric shock. • Always unplug when not in use.

• Disconnect power before installing or servicing. • Do not try to plug in unit or

product when hands are wet or damp, or if standing on a wet or damp surface

or in water. • Never attempt to pick up unit or plugged in product that should fall

in standing water. • This unit is not waterproof and is intended for general use

indoors. • Do not use in potentially dangerous locations, such as ﬂammable or

explosive atmospheres. • Keep cord away from heat, oil, sharp edges or moving

parts. • Failure to heed these warnings may result in personal injury and/or

property damage.

WARNING

SERVICE CART WEIGHT CAPACITY

Maximum Total Net Load ........................... 500 LBS

Top Lid of Cart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 LBS

Bottom Shelf ...................................... 150 LBS

3" Drawer(s) each . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 LBS each

4" Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 LBS each

5" Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 LBS each

PLEASE NOTE: Loading cart beyond rated capacity may cause structural

damage to the cart as well as personal and /or property damage. Please

educate your customers to the dangers of overloading. Do not attempt to

push cart with items on the top lid.

WARNING

ASSEMBLY INSTRUCTIONS

FIG. 1

Installing 4 pc. caster (#18/#23) onto the bottom tray

(#17) with #19/#20/#21.

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP 2 06/06/18

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP

Quick Assembly Deluxe Service Cart With Power Prep

ASSEMBLY INSTRUCTIONS

FIG. 2

Install leg/bumper(#10,#11) onto the cart body

(#8) and fasten with 6 blots (#30).

FIG. 3

Turn cart body 180º to install second leg/bumper (#10,#11)

onto the cart body (#8) and fasten with 6 blots (#30).

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP 3 06/06/18

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP

Quick Assembly Deluxe Service Cart With Power Prep

ASSEMBLY INSTRUCTIONS

FIG. 5

Turn cart body 90° and fasten

remaining 8 bolts (#30).

FIG. 4

Turn cart body 90º to install 3rd and 4th leg/bumper(#10,#11)

onto the cart body (#8) and fasten with 6 blots (#30). Put

bottom tray w/casters (#17) onto the 4 legs and fasten with 8

bolts (#30)

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP 4 06/06/18

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP

Quick Assembly Deluxe Service Cart With Power Prep

ASSEMBLY INSTRUCTIONS

FIG. 6

Mount the push handle (#7) to the same side of the

cart as the locking casters, using the four bolts (#6)

provided.

FIG. 7

Install Spray Can Divider (#16) onto the bottom tray

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP 5 06/06/18

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP

Quick Assembly Deluxe Service Cart With Power Prep

PARTS DRAWING

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP 6 06/06/18

MSC4RQP, -BKQP, -BLQP, -GQP, -OQP, -SBQP, -SVAQP, -TIQP

Quick Assembly Deluxe Service Cart With Power Prep

TROUBLESHOOTING

PARTS LIST AND PARTS DRAWING

Item No. Part No. No. Req'd Description

1 RS4RCP 1 Cord Rubber Protector

2 MSC4LIDR9 1 Lid - Red

MSC4LIDBK9 1 Lid - Black

MSC4LIDBL9 1 Lid - Blue

MSC4LIDNG9 1 Lid - Green

MSC4LIDNO9 1 Lid - Orange

MSC4LIDSB9 1 Lid - Stealth Black

MSC4LIDSVA9 1 Lid - Silver Vein

MSC4LIDTI9 1 Lid - Titanium

3 RSLMQPMRN 1 Locking Mechanism (Excludes Lock) - Red

RSLMQPMBKN 1 Locking Mechanism (Excludes Lock) - Black

RSLMQPMBLN 1 Locking Mechanism (Excludes Lock) - Blue

RSLMQPMNGN 1 Locking Mechanism (Excludes Lock) - Green

RSLMQPMNON 1 Locking Mechanism (Excludes Lock) - Orange

RSLMQPMSBN 1 Locking Mechanism (Excludes Lock) - Stealth Black

RSLMQPMSVAN 1 Locking Mechanism (Excludes Lock) - Silver Vein

RSLMQPMTIN 1 Locking Mechanism (Excludes Lock) - Titanium

4 RSGP 2 Gas Piston

RSGPBK 2 Gas Piston - Black

5 RS4QPHBC 2 Handle Backets/ Pair with Hardware - Chrome

RS4QPHBBK 2 Handle Backets/ Pair with Hardware - Black

6 RS4QPHBKC 8 M8x19 Bolts w/ Plum Bolts - Chrome

RS4QPHBKBK 8 M8x19 Bolts w/ Plum Bolts - Black

7 RSMSC4HDL 1 Push Handle

8 1 Cart Body

9 RSLKB 1 Lock with keys

10 RSMSC4PLGR 4 Leg/Each - Red

RSMSC4PLGBK 4 Leg/Each - Black

RSMSC4PLGBL 4 Leg/Each - Blue

RSMSC4PLGNG 4 Leg/Each - Green

RSMSC4PLGNO 4 Leg/Each - Orange

RSMSC4PLGSB 4 Leg/Each - Stalth Black

RSMSC4PLGSVA 4 Leg/Each - Silver Vein

RSMSC4PLGTI 4 Leg/Each - Titanium

11 RSMSC4BP 1 Safety bumper (4pc)

12 MSC4PLD3RR 1 3" Right Drawer - Red

MSC4PLD3BKR 1 3" Right Drawer - Black

MSC4PLD3BLR 1 3" Right Drawer - Blue

MSC4PLD3NGR 1 3" Right Drawer - Green

MSC4PLD3NOR 1 3" Right Drawer - Orange

MSC4PLD3SBR 1 3" Right Drawer - Stealth Black

MSC4PLD3SVRA 1 3" Right Drawer - Silver Vein

MSC4PLD3TIR 1 3" Right Drawer - Titanium

13 RSMSC4SRPR 1 Screwdriver/Prybar Holder - Red

RSMSC4SRPBK 1 Screwdriver/Prybar Holder - Black

RSMSC4SRPBL 1 Screwdriver/Prybar Holder - Blue

RSMSC4SRPNG 1 Screwdriver/Prybar Holder - Green

RSMSC4SRPNO 1 Screwdriver/Prybar Holder - Orange

RSMSC4SRPSB 1 Screwdriver/Prybar Holder - Steatlh Black

RSMSC4SRPSVA 1 Screwdriver/Prybar Holder - Silver Vein

RSMSC4SRPTI 1 Screwdriver/Prybar Holder - Titanium

14 RS4QPRC 1 Rubber Cushion

15 RSRBS 4 Roller Bearing Slides

16 RSMSC4SCDR 1 Spray Can Divider - Red

RSMSC4SCDBK 1 Spray Can Divider - Black

RSMSC4SCDBL 1 Spray Can Divider - Blue

RSMSC4SCDNG 1 Spray Can Divider - Green

RSMSC4SCDNO 1 Spray Can Divider - Orange

RSMSC4SCDSB 1 Spray Can Divider - Stealth Black

RSMSC4SCDSVA 1 Spray Can Divider - Silver Vein

RSMSC4SCDTI 1 Spray Can Divider - Titanium

17 MSC4QPBTR 1 Bottom Tray - Red

MSC4QPBTBK 1 Bottom Tray - Black

MSC4QPBTBL 1 Bottom Tray - Blue

MSC4QPBTNG 1 Bottom Tray - Green

MSC4QPBTNO 1 Bottom Tray - Orange

MSC4QPBTSB 1 Bottom Tray - Stealth Black

MSC4QPBTSVA 1 Bottom Tray - Silver Vein

MSC4QPBTTI 1 Bottom Tray - Titanium

18 RSSWLCS 2 5" Swivel Locking Caster / each

RSSWLCSBK 2 5" Swivel Locking Caster / each - Black

19 * 16 Washer

20 * 16 Spring Washer

21 * 16 M8 x 16 Bolt Kits

22 RSMSC4QPRPR 2 Reinforced Piece / each - Red

RSMSC4QPRPBK 2 Reinforced Piece / each - Black

RSMSC4QPRPBL 2 Reinforced Piece / each - Blue

RSMSC4QPRPNG 2 Reinforced Piece / each - Green

RSMSC4QPRPNO 2 Reinforced Piece / each - Orange

RSMSC4QPRPSB 2 Reinforced Piece / each - Stealth Black

RSMSC4QPRPSVA 2 Reinforced Piece / each - Silver Vein

RSMSC4QPRPTI 2 Reinforced Piece / each - Titanium

23 RSSWCS 2 5" Swivel Caster Non-Locking / each

RSSWCSBK 2 5" Swivel Caster Non-Locking / each - Black

Item No. Part No. No. Req'd Description

24 MSC4HC 1 6 Pc. Chrome Handles - Chrome

MSC4HBK 1 6 Pc. Chrome Handles - Black

25 RSMSC4JR 2 "J" Channel - Red

RSMSC4JBK 2 "J" Channel - Black

RSMSC4JBL 2 "J" Channel - Blue

RSMSC4JNG 2 "J" Channel - Green

RSMSC4JNO 2 "J" Channel - Orange

RSMSC4JSB 2 "J" Channel - Stealth Black

RSMSC4JSVA 2 "J" Channel - Silver Vein

RSMSC4JTI 2 "J" Channel - Titanium

26 RSMSC4CCPR 1 Center Clip-on pcs/pair - Red

RSMSC4CCPBK 1 Center Clip-on pcs/pair - Black

RSMSC4CCPBL 1 Center Clip-on pcs/pair - Blue

RSMSC4CCPNG 1 Center Clip-on pcs/pair - Green

RSMSC4CCPNO 1 Center Clip-on pcs/pair - Orange

RSMSC4CCPSB 1 Center Clip-on pcs/pair - Stealth Black

RSMSC4CCPSVA 1 Center Clip-on pcs/pair - Silver Vein

RSMSC4CCPTI 1 Center Clip-on pcs/pair - Titanium

27 MSC4PLD5R 1 5" Drawer - Red

MSC4PLD5BK 1 5" Drawer - Black

MSC4PLD5BL 1 5" Drawer - Blue

MSC4PLD5NG 1 5" Drawer - Green

MSC4PLD5NO 1 5" Drawer - Orange

MSC4PLD5SB 1 5" Drawer - Stealth Black

MSC4PLD5SVA 1 5" Drawer - Silver Vein

MSC4PLD5TI 1 5" Drawer - Titanium

28 MSC4PLD4R 1 4" Drawer - Red

MSC4PLD4BK 1 4" Drawer - Black

MSC4PLD4BL 1 4" Drawer - Blue

MSC4PLD4NG 1 4" Drawer - Green

MSC4PLD4NO 1 4" Drawer - Orange

MSC4PLD4SB 1 4" Drawer - Stealth Black

MSC4PLD4SVA 1 4" Drawer - Silver Vein

MSC4PLD4TI 1 4" Drawer - Titanium

29 MSC4PLD3RL 1 3" Left Drawer - Red

MSC4PLD3BKL 1 3" Left Drawer - Black

MSC4PLD3BLL 1 3" Left Drawer - Blue

MSC4PLD3NGL 1 3" Left Drawer - Green

MSC4PLD3NOL 1 3" Left Drawer - Orange

MSC4PLD3SBL 1 3" Left Drawer - Stealth Black

MSC4PLD3SVLA 1 3" Left Drawer - Silver Vein

MSC4PLD3TIL 1 3" Left Drawer - Titanium

30 RS4QPLHK 32 Leg Hardware Kit (M8 x 17)

RS4QPLHKBK 32 Leg Hardware Kit (M8 x 17) - Black

* RS4QPCHK Caster Hardware Kit (incl 19,20 & 21)

* RS4QPCHKBK Caster Hardware Kit - Black (incl 19,20 & 21)

Also available:

RSRBSDET8PK Ball Bearing Slide Detents (Package of 8).

RSMSC46LK 6 Piece Liner Kit

MSC4FC Set of 2 Fixed 5" x 2" Casters (Optional - Not Included)

RSMSC4RD Red Touch-Up Paint

RSBKP Black Touch-Up Paint

RSMSC4BLU Blue Touch-Up Paint

RSMSC4NG Green Touch-Up Paint

RSMSC4NO Orange Touch-Up Paint

RSMSC4SBP Stealth Black Touch-Up Paint

RSMSC4TI Titanium Touch-Up Paint

Touch-Up Paint Not Available for Silver Vein

Problem: Drawers appear not to fit, do not slide in accurately and bump the cart sides.

Solution: The roller bearing slides must be fully engaged into the mounting slots on all drawers. They potentially could fall out of position in shipment or

during assembly. Remove the drawer that is out of position. The drawer is removed by the two clips on the roller bearing slides. Simply push the roller