Matrix CONNEXUS GFT3S User manual

CONNEXUS GFT3S
GFT2S

2
3 ENGLISH
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE
XX LANGUAGE

3
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether they are the end user or supervising
personnel on proper usage of the equipment.
It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX equipment be used
properly to avoid injury.
INSTALLATION
STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a stable base and properly leveled.
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is specically regulated by the owner. It is up to the owner to
determine who is allowed access to this training equipment. The owner should consider a user’s: degree of reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its intended purpose in accordance with the instructions provided
by the manufacturer.
This equipment is for indoor use only.
PROPER USAGE
1. Do not exceed weight limits of this equipment.
2. Balance the weight applied to this equipment.
3. Add or remove no more weight than you can
safely lift and control.
4. Engage wheel locks when this equipment is stationary
to prevent unintended motion.
5. Push (do not pull on this equipment) when moving.
6. Maintain control of this equipment at all times when moving.
WARNING
1. Do not perform exercises using
this storage cart.
2. NEVER use this equipment for
support during stretching, as this
may result in serious injury.
3. Do not exceed the weight
capacity of this equipment.

4
MAINTENANCE
1. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country’s local MATRIX dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information. If unreadable or missing, contact your MATRIX
dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth
operating equipment as well as keeping your liability to a minimum. Equipment
needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments or performing maintenance or
repair of any kind is qualied to do so. MATRIX dealers will provide service and
maintenance training at our corporate facility upon request.
WARRANTY
For North America, please visit www.matrixtness.com for warranty information
along with warranty exclusions and limitations.
MAINTENANCE CHECKLIST
ACTION FREQUENCY
Inspect Hardware/Pull pins Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips * As Needed
* Grips should be cleaned with a mild soap and water or a non-ammonia based cleaner.
PRODUCT SPECIFICATIONS
GFT2S
2 SHELF ROLLING STORAGE
GFT3S
3 SHELF ROLLING STORAGE
Product Weight 67.5 kg / 149 lbs. 96 kg / 212 lbs.
Overall Dimensions
(L x W x H) 80 x 109 x 122 cm / 31.5 x 43 x 48” 80 x 123 x 167 cm / 31.5 x 48 x 66”
Max Storage Weight 227 kg / 500 lbs. 340 kg / 750 lbs.

5
TOOLS REQUIRED FOR ASSEMBLY (not included)
3MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench Phillips Screwdriver
5MM L-Shaped Allen Wrench 8MM Open-End Wrench
6MM L-Shaped Allen Wrench 17MM Open-End Wrench
8MM L-Shaped Allen Wrench Guide Rod Lubrication
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 110 120 130
UNPACKING
Thank you for purchasing a MATRIX Fitness product. It is inspected before it is
packaged. It is shipped in multiple pieces to facilitate the compact packaging of the
machine. Prior to assembly, conrm all the components by matching them with
the exploded diagrams. Carefully unpack the unit from this box and dispose of the
packing materials in accordance with your local laws.
CAUTION
To avoid injury to yourself and prevent damage to the frame components, be sure to
have proper assistance removing the frame pieces from this box. Please be sure to
install the equipment on a stable base, properly level the machine and leave at least
two feet of clearance to load and unload the cart.

6
GFT2S 2-Shelf Mobile Storage
FREE AREA
0.6 m(2 Ft) widE pAth
80 cm
(31.5 in)
109 cm
(43 in)
TRAINING AREA
Z06x16
Z07x16
Z13x16
B11x5
Item Description Qty
Z13
Z06
Z07
B11
Screw (M8x1.25Px20L)
Flat Washer (M8)
Spring Washer (M8)
Shim; Wheel; Zinc Plate; GT04
16
16
16
5
Assemble shim
plates as shown

7
GFT3S
3-Shelf Mobile Storage
Z13x4
Z07x4
Z06x4
Z08x8 Z09x8
Z06x24
Z07x24
Z13x24
B11x5
Item Description Qty
Z13
Z06
Z07
Z08
Z09
B11
Screw (M8x1.25Px20L)
Flat Washer (M8)
Spring Washer (M8)
Screw (M10x1.5Px15L)
Arc Washer (M10)
Shim; Wheel; Zinc Plate; GT04
28
28
28
8
8
5
FREE AREA
0.6 m(2 Ft) widE pAth
80 cm
(31.5 in)
123 cm
(48 in)
TRAINING AREA
Assemble shim
plates as shown

CONNEXUS - GFT2S / GFT3S
© 2015 Johnson Health Tech
Part # XXXXXXXXXX
Rev 1.1