Matrix G3-MS52 Owner's manual

AURA
SERIES
G3-MS24
G3-MS51
G3-MS52
G3-MS53
G3-MS20
G3-MS40
G3-MS50
G3-MS80

2

3
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX products to instruct all
individuals, whether they are the end user or supervising personnel on proper usage of
the equipment.
It is recommended that all users of MATRIX exercise equipment be informed of the
following information prior to its use.
Do not use any equipment in any way other than designed or intended by the
manufacturer. It is imperative that MATRIX equipment be used properly to avoid injury.
INSTALLATION
1. STABLE AND LEVEL SURFACE: MATRIX exercise equipment must be installed on a
stable base and properly leveled.
2. SECURING EQUIPMENT: Manufacturer recommends that all stationary MATRIX
strength equipment be secured to the oor to stabilize equipment and eliminate
rocking or tipping over. This must be performed by a licensed contractor.
All anchor points must be able to withstand 750 lbs. (3.3 kN) pull-out force.
MAINTENANCE
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use
only replacement parts supplied by your country’s local MATRIX dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information. If unreadable or missing, contact your MATRIX
dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth
operating equipment as well as keeping your liability to a minimum. Equipment
needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments or performing maintenance or
repair of any kind is qualied to do so. MATRIX dealers will provide service and
maintenance training at our corporate facility upon request.
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is
specically regulated by the owner. It is up to the owner to determine who is allowed
access to this training equipment. The owner should consider a user’s: degree of
reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its
intended purpose in accordance with the instructions provided by the manufacturer.
This training equipment is in compliance with EN 957-1 and the relevant portions of EN
957-2 and EN 957-4.
WARNING
General Selectorized
DEATH OR SERIOUS INJURY CAN OCCUR ON THIS
EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID
INJURY!
1. Keep children under the age of 14 away from this
strength training equipment. Teenagers must be
supervised at all times while using this
equipment.
2. This equipment is not intended for use by persons
with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the equipment by a
person responsible for their safety.
3. All warnings and instructions should be read and
proper instruction obtained prior to use. Use this
equipment for its intended purpose ONLY.
4. Inspect the machine before use. DO NOT use
machine if it appears damaged or inoperable.
5. Do not exceed weight capacity of this equipment.
6. Check to see that the selector pin is completely
inserted into the weight stack.
7. NEVER use the machine with the weight stack
pinned in an elevated position.
8. NEVER use dumbbells or other means to
incrementally increase the weight resistance. Only
use the means provided directly from the
manufacturer.
9. Injuries to health may result from incorrect or
excessive training. Cease exercise if you feel faint
or dizzy. Obtain a medical exam before beginning
an exercise program.
10. Keep body, clothing, hair, and fitness accessories
free and clear of all moving parts.
11. Adjustable stops, where provided, must be used
at all times.
12. When adjusting anyadjustable mechanism (stop
position, seat position, pad location, range of
motion limiter, pulleycarriage, or any other type),
make certain that the adjustable mechanism is fully
engaged prior to use to prevent unintended motion.
13. Manufacturer recommends that this equipment be
secured to the floor to stabilize and eliminate
rocking or tipping over. Use a licensed contractor.
14. If equipment is NOT secured to floor: NEVER allow
resistance straps, ropes or other means to be
attached to this equipment, as this may result in
serious injury. NEVER use this equipment for
support during stretching, as this may result in
serious injury.
15. DO NOT REMOVE THIS LABEL. REPLACE IF
DAMAGED OR ILLEGIBLE.
NOT a stand-alone unit.
MUST be connected to
other units in a
Matrix-approved
configuration for
added stability.
WARNING

4
PRODUCT SPECIFICATIONS
G3-MS24
Adjustable
Pulley
G3-MS51
Lat Pulldown
G3-MS52
Triceps
Pressdown
G3-MS53
Low Row
G3-MS20
Adjustable Cable
Crossover
G3-MS40
4-Stack
Multi-station
G3-MS50
5-Stack
Multi-station
G3-MS80
8-Stack
Multi-station
Max User Weight 136 kg / 300 lbs.
Product Weight 90 kg /
198.5 lbs.
118 kg /
261 lbs.
80.5 kg /
177.5 lbs.
126 kg /
278 lbs.
399 kg /
880 lbs.
998 kg /
2200 lbs.
1197 kg /
2640 lbs.
1996 kg /
4400 lbs.
Overall Dimensions
(L x W x H)*
68 x 70 x 240 cm /
27 x 28 x 94.5”
126 x 120 x 252 cm /
50 x 47.5 x 99.5”
85 x 59 x 240 cm /
33.5 x 23.5 x 94.5”
230 x 71 x 240 cm /
91 x 28 x 94.5”
397.4 x 90 x 239.6 cm /
156.5 x 35.4 x 94.3”
167.8 x 369.8 x
252 cm /
66.1 x 145.6 x
99.2”
481.5 x 369.8 x
251.7 cm /
189.6 x 145.6 x
99.1”
561.3 x 145.6 x
251.7 cm /
221 x 57.3 x 99.1”
Weight Stack 91 kg /
200 lbs.
134 kg /
295 lbs.
91 kg /
200 lbs.
134 kg /
295 lbs.
2 x 91 kg /
2 x 200 lbs.
2 x 91 kg,
2 x 134 kg /
2 x 200 lbs.,
2 x 295 lbs.
3 x 91 kg,
2 x 134 kg /
3 x 200 lbs.,
2 x 295 lbs.
4 x 91 kg,
4 x 134 kg /
4 x 200 lbs.,
4 x 295 lbs.
* Ensure a minimum clearance width of 0.6 meters (24”) for access to and passage around MATRIX strength equipment.
Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs.
PROPER USAGE
1. Do not exceed weight limits of the exercise device.
2. If applicable, set safety stops to appropriate height.
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion adjustment,
or any other type of adjustment mechanisms to a comfortable start position.
Make certain that the adjusting mechanism is fully engaged to prevent
unintentional movement and to avoid injury.
4. Sit on bench (if applicable) and get into appropriate position for exercise.
5. Exercise using no more weight than you can safely lift and control.
6. In a controlled manner, perform exercise.
7. Return weight to its fully-supported start position.
WARRANTY
For North America, please visit www.matrixtness.com for warranty information
along with warranty exclusions and limitations.
MAINTENANCE CHECKLIST
ACTION FREQUENCY
Clean Upholstery * Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips * As Needed
Lubricate Guide Rods † As Needed
* Upholstery & Grips should be cleaned with a mild soap and water or a non-
ammonia based cleaner.
† Guide rods should be lubricated with Teon based lubricant. Apply the
lubricant to a cotton cloth and then apply up and down the guide rods.

5
TOOLS REQUIRED FOR ASSEMBLY (not included)
3MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench Phillips Screwdriver
5MM L-Shaped Allen Wrench 8MM Open-End Wrench
6MM L-Shaped Allen Wrench 17MM Open-End Wrench
8MM L-Shaped Allen Wrench Guide Rod Lubrication
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 110 120 130
UNPACKING
Thank you for purchasing a MATRIX Fitness product. It is inspected before it is
packaged. It is shipped in multiple pieces to facilitate the compact packaging of the
machine. Prior to assembly, conrm all the components by matching them with
the exploded diagrams. Carefully unpack the unit from this box and dispose of the
packing materials in accordance with your local laws.
CAUTION
To avoid injury to yourself and prevent damage to the frame components, be sure
to have proper assistance removing the frame pieces from this box. Please be sure
to install the equipment on a stable base, and properly level the machine. Ensure
a minimum clearance width of 0.6 meters (24”) for access to and passage around
MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA recommended
clearance width for individuals in wheelchairs.

6
G3-MS24
TECH SPECS
Maximum Training Weight 91 kg / 200 lbs.
Product Weight 90 kg / 199 lbs.
Overall Dimensions (L x W x H)* 68 x 70 x 240 cm / 27” x 28” x 94.5”
* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.
TRAINING AREA
3.2 M(10.5 FT)
FREE AREA
0.6 M(2 FT)
WIDE PATH
68˚ 68˚
MS24 DIMENSIONS
0.68 M× 0.70 M
(27 IN × 28 IN)
Adjustable
Pulley
Adjustable
Pulley
11
22
11
22
Triceps
Biceps

7
Z01
Z02
Z04
Z05
Z06
Z11
Z12
Z13
B25
V03
F01
F02
F03
F04
F05
Z20
Z21
K19
Screw, Oval-Hex Socket (M10x100L)
Arc-flat Washer
Nylon Nut (M10)
Screw, Oval-Hex Socket (M12x25L)
Flat Washer (M12)
Screw, Oval-Hex Socket (M6x45L)
Nylon Nut (M6)
Rubber Stack Cushions
Screw, Oval-Hex Socket (M8x30L)
Sticker, Weight Stack Plate
Pulley (115mm)
Pulley (90 mm)
Bolt, hex-head
Nylon Nut (M10)
Cable
Rubber Tip Weight Shield Bolt
Rubber Shield
Screw, Oval-Hex Socket (M6x15L)
4
8
4
2
2
2
2
2
2
1
3
4
7
7
1
8
8
10
Item Description Qty
NOTE:
Before attaching weight plate decals,
be sure to verify the head plate is
positioned on the weight stack so that
the bolt attaching the pull pin to the
head plate is positioned behind the
chrome adjustment tube.
B25
F05
Z05
Z06
F03x2
F02x2
F04x2
Z05
Z06 Z20x8
Z21x8
F04
F01
F03
F04
F02
F03
K19x2
Z12x2
Z11x2
K19x8
F04
F01
F03
V03 F04 F02
F03 Z13x2
Z04x4
Z02x8
Z01x4
F04
F01
F03
G3-MS24

8
G3-MS51
Lat
Pulldown
Lat
Pulldown
11
22
MS51
TRAINING
AREA
FREE AREA
0.6 M(2 FT)
WIDE PATH
1.2 M
(47.5”)
1.26 M
(50”)
TECH SPECS
Maximum Training Weight 134 kg / 295 lbs.
Product Weight 118 kg / 261 lbs.
Overall Dimensions (L x W x H)* 126 x 120 x 252 cm / 50” x 47.5” x 99.5”
* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.

9
Z01
Z04
Z05
Z07
Z08
Z17
Z18
Z10
Z11
Z12
Z13
Z14
Z15
Z16
V03
F06
F08
F22
F23
K19
Screw, Round-Hex Socket (M8x30L)
Screw, Round-Hex Socket (M10x100L)
Flat Washer (M10)
Nylon Nut (M10)
Screw, Round-Hex Socket (M10x80L)
Screw, Round-Hex Socket (M10x25L)
Arc-flat Washer
Screw, Round-Hex Socket (M12x25L)
Flat Washer (M12)
Lock Washer (M12)
Screw, Round-Hex Socket (M6x45L)
Nylon Nut (M6)
Screw, Oval-Hex Socket (M10x35L)
Rubber Stack Cushions
Sticker, Weight Stack Plate
Pulley
Cable
Bolt, hex-head
Nylon Nut (M10)
Screw, Round-Hex Socket (M6x15L)
2
16
4
18
2
2
34
2
2
2
2
2
3
2
1
7
1
7
7
10
Item Description Qty
F23 F06
F22
F23 F06
F22
F23
F06 F22
F23
F06
F22
Z16
Z14
K19
Z13
Z10 Z12 Z11
Z15 Z07
Z05
Z08
Z18
Z17
Z18
Z04
Z01
Z07Z18
Z18
Z04
V03
F08
G3-MS51

10
G3-MS52
TECH SPECS
Maximum Training Weight 91 kg / 200 lbs.
Product Weight 80.5 kg / 178 lbs.
Overall Dimensions (L x W x H)* 85 x 59 x 240 cm / 33.5” x 23.5” x 94.5”
* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.
Triceps
Pressdown
Triceps
Pressdown
11
22
FREE AREA
0.6 M(2 FT)
WIDE PATH
MS52
TRAINING
AREA
0.59 M
(23.5”)
0.85 M
(33.5”)

11
Z01
Z02
Z05
Z06
Z07
Z09
Z10
Z11
V02
F06
F08
F22
F23
K19
Screw, Oval-Hex Socket (M8x30L)
Screw, Oval-Hex Socket (M10x35L)
Screw, Oval-Hex Socket (M6x45L)
Nylon Nut (M10)
Arc-flat Washer
Screw, Oval-Hex Socket (M10x90L)
Nylon Nut (M10)
Rubber Stack Cushions
Sticker, Weight Stack Plate
Pulley
Cable
Bolt, hex-head
Nylon Nut (M10)
Screw, Oval-Hex Socket (M6x15L)
2
4
2
2
16
8
8
2
1
2
1
2
2
10
Item Description Qty
Guide Sleeve
Z02
F23 F06
F22
Z05
Z06
K19
V02
Z11
F08
Z09 Z07 Z07
Z10
F23
F06 F22
Z01
G3-MS52

12
G3-MS53
TECH SPECS
Maximum Training Weight 134 kg / 295 lbs.
Product Weight 126 kg / 278 lbs.
Overall Dimensions (L x W x H)* 230 x 71 x 240 cm / 91” x 28” x 94.5”
* Ensure a minimum clearance width of 914 mm / 36” for access to and passage around MATRIX strength equipment.
Low RowLow Row
11
22
MS53
TRAINING
AREA
FREE AREA
0.6 M(2 FT)
WIDE PATH
0.71 M
(28”)
2.92 M
(115”)

13
Z01
Z02
Z05
Z06
Z07
Z08
Z09
Z10
Z11
Z13
Z14
Z16
V03
F05
F07
F22
F23
K18
K19
Screw, Oval-Hex Socket (M8x30L)
Screw, Oval-Hex Socket (M10x35L)
Screw, Oval-Hex Socket (M6x25L)
Nylon Nut (M6)
Screw, Oval-Hex Socket (M8x70L)
Nylon Nut (M8)
Nylon Nut (M10)
Screw, Oval-Hex Socket (M10x25L)
Flat Washer (M10)
Screw, Oval-Hex Socket (M10x80L)
Rubber Stack Cushions
Arc-flat Washer
Sticker, Weight Stack Plate
Pulley
Cable
Bolt, hex-headv
Nylon Nut (M10)
Flat Washer (M8)
Screw, Oval-Hex Socket (M6x15L)
2
4
2
2
2
2
2
2
4
2
2
2
1
9
1
9
9
4
10
Item Description Qty
K18
F23
F05 F22
Z08
Z07
Z02
F23
F05 F22
Z09
Z11
Z13
Z01
Z10
Z16
V03
F23 F05
F22
Z14
F23
F05
F22
F23 F05
F22
Z05
Z06
K19
F07
Hooker
Handlebar Holder
G3-MS53

14
Z02
Z16 Screw, Round-HS(M8x30L)
Flat Washer (M8) 12
12
Item Description Qty
Frame Detail
Z16
Z02
Adjustable Pulley
G3-MS24
Low Row
G3-MS53
Tricep
G3-MS52
Lat Pull
G3-MS51
Z16
Z02
G3-MS40 4 Stack
Sample Conguration

15
Z02
Z16 Screw, Round-HS(M8x30L)
Flat Washer (M8) 12
12
Item Description Qty
Frame Detail
Z16
Z02
Adjustable Pulley
G3-MS24
Low Row
G3-MS53
Tricep
G3-MS52
Lat Pull
G3-MS51
Z16
Z02
G3-MS50
5 Stack - Step 1 of 3
Sample Conguration

16
Adjustabel Pulley Right
G3-MS24
Z12
Z10
Z22
Z15
Z14
Z12
Z10
Z22
Z02 Z16Z09 Z22
Z02
Z09
Z10
Z12
Z14
Z15
Z16
Z22
Flat Washer (M8)
Screw, Oval-HS(M10x100L)
Nylon Nut (M10)
Flat Washer (M10)
Screw, Round-HS(M10x80L)
Screw, Round-HS(M10x25L)
Screw, Oval-HS(M8x25L)
Arc Washer
4
4
8
8
4
4
4
12
Item Description Qty
Frame Detail
G3-MS50 5 Stack - Step 2 of 3
Sample Conguration

17
Z20
Z21 Rubber Shield
Rubber Tip Weight Shield Bolt 24
24
Item Description Qty
Accessory Detail
Z20Z21
Z20 Z21
Z20
Z21
Inner shrouds
present outside of
North America
only.
G3-MS50
5 Stack - Step 3 of 3
Sample Conguration

18
Z02
Z16 Screw, Round-HS(M8x30L)
Flat Washer (M8) 12
12
Item Description Qty
Frame Detail
Z16
Z02
Adjustable Pulley
G3-MS24
Low Row
G3-MS53
Tricep
G3-MS52
Lat Pull
G3-MS51
Z16
Z02
G3-MS80 8 Stack - Step 1 of 3
Sample Conguration

19
Z10
Z12 Flat Washer (M10)
Nylon Nut (M10) 4
8
Z14
Z15 Screw, Round-HS (M10x25L)
Screw, Round-HS (M10x80L) 4
4
Item Description Qty
Frame Detail
Z22 Arc-flat Washer 4
Z12
Z10
Z22
Z15
Z14
Z12
G3-MS80
8 Stack - Step 2 of 3
Sample Conguration

20
Z20
Z21 Rubber Shield
Rubber Tip Weight Shield Bolt 16
16
Item Description Qty
Accessory Detail
Inner shrouds
present outside of
North America only.
Z20
Z21
Z20
G3-MS80 8 Stack - Step 3 of 3
Sample Conguration