Matrix G3 STRENGTH User manual

G3 STRENGTH
G3-S42 SEATED DIP
MATRIX FITNESS | 1600 LANDMARK DRIVE COTTAGE GROVE WI 53527 USA
To l l Free 866.693.4863 matrixfitness.com Fax [phone]
PART # 0000000000
REV. 1.5
ACTION FREQUENCY
Clean Upholstery Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips As Needed
Lubricate Guide Rods As Needed
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water.
Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and
down the guide rods.
MAINTENANCE CHECKLIST
PRODUCT SPECIFICATIONS
TECH SPECS
Overall dimensions 61”L X 44”W x 59”H (155 cm x 112 cm x 150 cm)
Weight 575 lbs (261 kg)
Shipping weight 615 lbs (279 kg)
WARRANTY (Valid in USA only)
Frame (not coatings) 10 years
Structural parts 10 years
Weight stacks 5 years
Pulleys 5 years
Pivot bearings 5 years
Any items not specified 3 years
Labor (excluding upholstery/cables/grips) 3 years
Upholstery/cables/grips/springs 1 year
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they
are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information
prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX
Fitness Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by
your country’s local MATRIX Fitness Systems dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information.
If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over.
This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping
your liability to a minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so.
MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO
AVOID INJURY!
1. Never allow children on freeweight or bench equipment. Teenagers must be supervised at all times while using
this equipment.
2. All warnings and instructions should be read and proper instruction obtained prior to use.
3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts.
5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable.
6. This equipment should only be used in supervised areas where access and control are regulated by the owner.
IMAGE SHOWN MAY NOT REPRESENT FINAL PRODUCT

G3-S42 SEATED DIP
UNPACKING G3-S42 SEATED DIP
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and EN957-2 complaint Class S product. Your
MATRIX G3-S42 SEATED DIP is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact
packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. Carefully
unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the G3-S42 SEATED DIP is 575 lbs. (261 kg). To avoid injury to yourself and prevent damage to the frame com-
ponents, be sure to have proper assistance removing the frame pieces from this box. Please be sure to install the equipment on
a stable base, properly level the machine and leave at least two feet of clearence to enter and exit the machine. Maximum user
weight for this machine is 350 lbs. (159 kg).
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
17MM Open-End Wrench
3MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
10 120 130 140 150 160
Step 1
Frame Detail
Flat Washer
Screw
Lock Washer
Screw
Arc Flat Washer
Qty
24
16
16
8
G14
Item
D49
D48
G20
Description
Flat Washer(M10)
Arc-at Washer
Screw(M10X25)
Spring Washer(M10)
G14
G20
G14
D49
D48
D48
D49
G14
Step 2
Input Detail Description
Item
F16
F20
F21
Qty
Bushing(8mm)
F22 2
Wavy WasherH32 2
D46 2
Screw (M10x1.5Px25L)
Screw(M10x1.5Px35L)
Flat Washer(M10)
Lock Washer(M10)
2
2
2
F20
F16
F21
F22
F16
F21
F20
F22
D46
H32
H32
Step 4
Belt Routing Detail
Belt FixerF08 6
F14 12
F18 12
F19 12
Screw(M5x0.8Px35L)
Flat Washer(M5)
Lock Washer(M5)
F16 Screw(M12x1.75Px25L) 1
F60 Nylon Nut(M5) 8
Item Description Qty
F06
F48 1
1
Belt（2450mm)
Belt(900mm)
F16
F21
F20 2
2
2
Screw(M12x1.75Px25L)
Lock Washer(M12)
Flat Washer(M12)
Flat Washer
Belt
Screw
Lock Washer
Belt Fixer
AF1
AF1
F06
AF1
F14
F19
F18
F08
F20
F21
F60
F48
F16
F16 F21
F20
Step 6
Accessory Detail
Upper Cover Detail AB1
B43
B51
Q02
Upper Cover
Towel / Water
B28
Description
panel
B28
Weight Shield
Q06
Q06
Q01
Bottle Holder
Q05
Q05
Q05
Q06
B60
B18
B51
B43
B28
Rubber Shield SpacerQ05
Q06
Item Description
Weight Shield
Upper CoverQ02
Q01
B18 Water Bottle Holder
Screw (M8x1.25Px30L)
Screw (M4x0.7Px12L)
Internal Tooth Lock Washer(M5)
Rubber Tip Weight Shield Bolt(M8x1.25Px40L)
6
6
Qty
1
2
1
4
6
6
Step 3
Upholstery Detail D45
D49
D48
D49
D48
D45
D14
D44
G11
Description
Bushing
D44
D14
Item
2
2
Qty
D45
D48
D49
G11
Screw(M8x1.25Px30L)
Screw (M10x1.5Px65L)
Flat Washer(M10)
Lock Washer(M10)
Screw (M10x1.5Px25L）
G15
G14 D48
D48
D49
G15
D48
D49
D45
D49
D48
D48
G14
Screw (M10x1.5Px25L）
G14
4
6
8
G11
2
11
G15 Nylon Nut(M10) 4
Step 5
Weight Stack Detail
Guide Rod
Top Weight
Selector Pin
Screw
Guide Sleeve
Knurled Belt Securing Insert
10
K05 B28
1010
K07
K13
K13
25
190
280
295
235
265
250
220
205
145
160
175
115
130
70
100
85
55
40
L09
L10
K18
L14
L13
F18
K07
K13
B28
K05
K18
L13
L14
F18
2
Rubber Stack Cushions
E-Clipper
2
4
Knurled Belt Securing Insert 1
2
4
4
4
Screw(M8x1.25Px30L)
Screw(M5X0.8PX16L)
Lock Washer(M5)
Flat Washer(M5)
2
2
Item Description Qty
L09 Screw(M8x1.25Px20L)
L10 Flat Washer(M8)
Flat Washer(M8)
K11 Bushing 2
K11