Matrix G7 Strenght User manual

G7 SINGLE-STATION STRENGTH
CHEST PRESS
MATRIX F I T N ESS SYSTEMS |1600 L A N D M A R K D R I V E COTTAGE GROVE WI 53527 USA
To l l Fr ee 866.693.4 8 63 matrixfitness.com Fax [phone]
PART # 0000088210
REV. 1.1
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to in-
struct all individuals, whether they are the end user or supervising personnel on proper
usage of the equipment.
It is recommended that all users of MATRIX Fitness Systems exercise equipment be
informed of the following information prior to its use.
PROPER USAGE
Do not use any equipment in any way other than designed or intended by the manufac-
turer. It is imperative that MATRIX
Fitness Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid injury.
CHECK FOR DAMAGED PARTS
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use
only replacement parts supplied by your country’s local MATRIX Fitness Systems
dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They
contain important information.
If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replace-
ment.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and
eliminate rocking or tipping over. This must be performed by a licensed contractor.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operat-
ing equipment as well as keeping your liability to a minimum. Equipment needs to be
inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or repair
of any kind is qualified to do so.
MATRIX Fitness Systems dealers will provide service and maintenance training at
our corporate facility upon request.
chest_press_090422.indd 1 4/22/09 11:48 AM

GM41 CHEST PRESS
UNPACKING GM41 CHEST PRESS
Thank you for purchasing a MATRIX Fitness product. Your MATRIX GM41 CHEST Press is
inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact
packaging of the machine. Prior to assembly, confirm all the components by matching them
with the exploded diagrams. The weight stack is shipped in separate packaging to reduce
the weight of this box. Carefully unpack the unit from this box and dispose of the packing
materials in accordance with your local laws.
CAUTION
The weight of the GM41 CHEST Press is 825 lbs. (375 kg) not including the weight stack.
The weight stack tower is packaged completely assembly for ease of installation; use extra
caution when removing from its pallet during assembly. The weight stack for this machine is
429 lbs. (195 kg). To avoid injury to yourself and prevent damage to the frame components,
be sure to have proper assistance removing the frame pieces from this box.
TOOLS REQUIRED FOR ASSEMBLY
3MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
10MM L-Shaped Allen Wrench
Phillips Screwdriver
8MM Open-End Wrench
17MM Open-End Wrench
If any items are missing please contact your country’s local MATRIX dealer for assistance.
0mm 10 20 30 40 50 60 70 80 90 100 1
10 120 130 140 150 160
Frame Detail
Step 1
Q11
Q11
Q11
Q11
60
Lift the aluminumn wing and top cover,
then take apart the front and rear sheilds.
Q11 bolts won't be used anymore for the
wing and cover re-assembly.
Item Description Qty
1
Washer;Arc
4
12
8
4
4
8
4
Screw (M10X25L)
B27
B30
C36
G08
Q11
Z03
Z04
Z21
Flat Waher(M10)
Lock Waher(M10)
Rubber Pad;Fixing
Screw (M10X75L)
Screw (M8X60L)
Screw (M10X25L)
Z04 Screw (M10x25L) 4
Z04
Z03
C36
B30 B30
B27
B30 B27
B30
Z03 C36
Z04
Z21
Z04
Z21
Z21 Z04 B30
Z21
Z04 C36
B30
Z04C36
Z04
Step 2
Item Description Qty
1
1
1
1
1
1
B30 Flat Washer(M10) 2
C28 Cap Nut(M10) 2
F06
F07
Z15
Z05 Screw(M10X105)
H40
C17
F16
F13
Stopper Plate
Screw (φ10xM6x45L)
Flat Washer(M10)
Fixing Block
Small Pulley Cover
C24 Big Pulley Cover
Fixing Pin
Inner C type Clam
2
2
2
Z05
B30
C28
Z15
C17
C28
B30
Cable
Z05
C24
Cable
H40
F07
F16 F06
F07
F13
F16
Cable
Step 3
Item Qty
Description
8
C31 8
Screw (M8X25L)
C17
J18
J20
Pulley Cover
CON Rod
Swirl Spring
4
2
C31
C31
AJ1
C31
C17
C17
J18
J18 J20
J20 J18
J18 C17
C31
C17
Step 4
Item
2
Qty
Description
2
2
2
D11 Fixing Axle
H28
H30
Z09
Z10
Z13
Screw (M6X60L)
Flat Waher(M6)
Cap Nut
6
Screw (M6X12L)
Z06
Z17 Settle Screw 3
Steel Cable 1
Clamp 3
H28
AH3
Z17
H30
H30
Z17
Z17
H30
Z10
Z06
Z10
D11
Z10
Z09
Z13
Z10
Z06
D11
Z10
Z09
Z10 Z13
Step 5
Item Description Qty
Screw (M8X60L) 4
Z20
Rubber Pad Fixing Plate
Z20 Z20
Z20
Z20
Step 6
Item Description
Z18 Screw(M10X75L)
Z19 Screw(M10X15L)
Qty
4
4
Head Pad
Z18
Z18
Z19
Z18
Z18
Back Pad
Seat Pad
chest_press_090422.indd 2 4/22/09 11:48 AM