Mattel Fisher-Price RESCUE HEROES Quick Response... User manual

Consumer Information
To the Rescue!
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©2002 Mattel, Inc. All Rights Reserved. Printed in China
® and ™ designate U.S. trademarks of Mattel, Inc. B1628pr-0920
•Fit the launcher into any of the holes in the
pontoon boat, arch or jet ski.
•Insert the rescue buoys into the slots in the launcher.
Press the launcher button to fire the rescue buoys!
•Fit the water skis to the tabs on the pontoon boat.
•Insert the tab on the jet ski into the slot in the pontoon boat.
Press the button on the pontoon boat to propel the jet ski!
•Fit any of the Rescue Heroes™equipment packs (sold separately)
to the pack holders.
Water
Skis
Hole
Pack
Holder Hole
Tab
Slot
Jet Ski
Pontoon Boat
Rescue
Buoys
Launcher
Press
Button Press
Button
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Relations, toll-free at 1-800-432-KIDS,
8 AM - 6 PM EST Monday through Friday.
Hearing-impaired consumers using TTY/TDD equipment,
please call 1-800-382-7470. Or, write to:
Fisher-Price®Consumer Relations
636 Girard Avenue
East Aurora, NewYork 14052
For other countries, outside the United States:
Canada:Call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
Great Britain: telephone [phone].
Australia:Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
New Zealand:16-18 William Pickering Drive, Albany 1331, Auckland.

Product Number: B1628
Please save this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
No tools needed for assembly.
™
Quick Response Watercraft
Quick Response Watercraft
www.rescueheroes.com
Figure sold separately.
This toy is not intended for use in water.

Parts
•Do not aim at eyes or face.
•Only use projectiles (rescue buoys) supplied with this toy.
•Do not launch at people or animals.
CAUTION
Water
Skis
Rescue
Buoys
Launcher
Handle
Jet Ski
Arch
Pontoon
Boat
2
Not Shown: Label Sheet

•Position the arch with the bend toward the back of the pontoon boat. Insert and
snap the arch tabs into the slots in the pontoon boat.
•Position the handle with the smooth side toward the front of the jet ski. At an
angle, fit a knob on the end of the handle into one of the slots in the jet ski.
Snap the other knob on the end of the handle into the other slot in the jet ski.
•Make sure the areas where the labels will be
applied are clean and dry.
•Apply the labels as indicated in the illustration.
•For best results, avoid applying the labels more than once.
One-time assembly is now complete.
Jet Ski
Slots
Knobs
Handle
3
One-time Assembly
1
Slots
Pontoon
Boat
Arch
Tab
Tab
24
2
3
567
8
1
9
10
11
12
13
(14 on
opposite
side)