Maxview COMBO/51 Assembly Instructions

Installation & User Instructions
COMBO/51
UK contact:
Helpline: [phone]
Email: suppor[email protected]o.uk
Web: www.maxview.co.uk
Maxview reserve the right to change specifications without prior notice
9111458 Iss 1
Roam Combo X
We have partnered up with one of the largest
suppliers of Wi-Fi products worldwide.
Roam Combo X Powered by
This manual provides information on how to control the Roam Combo X Router using
your devices internet browser. Most of these functions can be completed easier and
faster using the Maxview Roam Combo X App. See the Roam Combo App instruction
manual for more information.
Maxview Address:
Maxview Ltd, Garage Lane, Setchey, King’s Lynn, Norfolk. PE33 0AT. UK

Contents
Record your Purchase
Please fill in the details below once purchased. This information will be required in the unlikely event of a fault
occurring with this system.
SERIAL NUMBER
2. Record your Purchase
3. Product Contents
3. Tools Required
3. Choosing a Service Provider
4. Accessories
Installation Instructions
5. Antenna Installation
8. Signal Booster Installation
12. Inserting Sim Card
13. Router Installation
Router - Getting Connected and Basic Functions
16. Get to know your Router
17. Getting Online
19. Factory Reset
Router - Advanced Functions and Changing Router
Settings
21. Connecting to the Web User Interface
23. Logging out of the Web User Interface
Router - Changing the Primary Internet Source
from 3G/4G to Wi-Fi
25. Changing the Primary Source
28. Changing the Routers LAN IP Address
Router - Other Functions
30. Managing and Removing Wi-Fi Connections
30. Changing Wi-Fi SSID (name) and Password
32. Entering SIM PIN
33. Controlling Data Usage & Other Functions
34. Router Firmware Update
Additional Information
35. General Safety Warnings
35. Terms and Conditions
35. Maintenance
36. 2 Year Guarantee
37. Troubleshooting & FAQ’s - For Internet with Router
40. Troubleshooting & FAQ’s - For TV with Signal Booster
42. Specifications
43. Certification and Environment
Introduction
Thank you for purchasing this product, should you have any difficulty using your
Roam Combo X Combo Combo please contact our friendly Customer Helpline
on [phone] or email [e-mail].
SSID
PASSWORD
See page 16 to see where you can find this information.
2

Product Contents
A. Antenna Mounting Foot
B. Combo Antenna* with 2 x 0.8m cables with
SMA connectors and 1 x 5m coaxial cable
C. Roof Clamp
D. ‘F’ Connector
E. Fused Power Cable (For Signal Booster)
F. Fixing Screws
G. 1m F to Coaxial Flylead
*White or Grey Plastics
A
I
H
CL
G
Tools required
- Power Drill
- 2.5mm Drill Bit
- Pozidrive (No.2) Screwdriver
- Cross Head Screwdriver
Choosing a Service Provider
To use the Maxview Roam Combo X, you will need a suitable data SIM card (sold separately).
The Maxview Roam Combo X -pis unlocked, so you can use any service provider. The best package
will depend on many factors such as data usage, budget, location of travel and usage habits,
however pre-paid data plans are usually more cost effective.
- File/Emery Paper
- Surface Cleaner
- Knife
!
3
E
- 25mm Hole Saw
- 4mm Allen Key
- Side Cutters
- Hack Saw
B
J
H. Signal Booster
I. 1.5m Ethernet Cable
J. 12V Vehicle Power Supply (for Router)
K. Router Bracket
L. 4G/5G Router
M. SIM Adaptor Pack
N. 2 x Internal Wi-Fi Antennas
O. Fixing Template
D
F
K
MN
O

4
Roam Combo Extension Cables
Extension cables can be purchased separately to
allow a flexible mounting position to the router.
1 metre MXL050/EXT1
2 metres MXL050/EXT2
Accessories -
Sold separately
Roam Combo 230V PSU
230V ac to 12V dc Power Supply Unit
to power a Roam Combo. For indoor use only.
MXL051/PSUUK3 metres MXL050/EXT3

Antenna
Installation Instructions
5

6
Mounting Foot
with wet seal and
Clamping Tool
Towards front of vehicle

!Allow the Flexible Adhesive to cure as per the manufacturers guidelines before travel. 7
Front of
vehicle
X = 2mm
Y = 25mm
XY
X
X
X
Choose a location, ensure the antenna is positioned
on a flat surface and is clear from obstructions.
Use the included template and drill 5 x 2mm holes.
Use hole position (Y) as a pilot hole to drill a larger
25mm hole. Clean up hole, ensuring the location of
the Mounting Foot is clean and clear from debris
and dirt.
Position the Mounting Foot and press down firmly.
3
Apply sealant generously to the wet seal channel,
ensuring the bead is consistent in size with no gaps.
2
OPTIONAL - For optimum secure mounting, use the
4 supplied Roof Fixing Screws, to secure the
Mounting Foot to the vehicle roof.
4
If your roof thickness is between 19-40mm, you
can screw the Foot Clamp into the Mounting Foot
underside to cover the hole inside the vehicle.
Note: The Clamping Tool can
be cut down to suit your
vehicle roof thickness.
Turn anti-clockwise until
tight and secure Foot Clamp
with the Foot Clamp Screw.
Installation of the Mounting Foot is now complete.
5
1
19-40mm
Place the Antenna Head Unit onto the Mounting Foot.
Tighten the 4 Foot Mounting Bolts by hand with an
Allen Key.
We recommend the use of a Torque Wrench set to
3.5Nm.
Installing the Antenna Head Unit
6

Signal Booster (For TV)
Installation Instructions
8

9
Cable routing
Route Coaxial Cable inside vehicle to Variable Signal
Booster which should be located near your TV/
Receiver.
Note cable can be shortened to suit application.
Please Note:
When fitting the Signal Booster and Router, there should be as much distance between the
two units as possible. The TV Coax cable and Router SMA cables should also not be routed
next to each other wherever possible. This will reduce the potential for interference between
the two systems.
!
✗✓

Connections & features
A. 12/24V power input
B. On/off power switch
C. Wall fixing hole
Operation
1. Slide power switch to the right. The LED indicator should now be on.
2. Turn the gain control knob clockwise to increase signal strength.
Power source methods
- 12/24V DC (Fused Power Cable included for 12/24V wiring)
- 12/24V DC PSU Output (230V PSU)
F
C
D. Antenna input
E. TV output 1
F. TV output 2
G. Gain control knob
H. Power indicator
Can be mounted to vehicle
shelving or side panels using the
2 screws provided.
Note:
Before drilling always check for
hidden electrical wires or
plumbing.
Mounting Option
Using Signal Booster
I
OUT OUT
IN
12/24V
ADE
BGH
CC
F
10
Fitting F Connector
If you decide to shorten the cable please see below method of preparing cable.
Cut cable to required length. Strip
away 12mm of outer insulation.
Gather strands of screening braid,
twist together and wind back
around outer insulation. Cut foil
to be flush with outer insulation.
12
Strip away 10mm of inner
insulation around the inner wire.
Check none of the screening braid
is touching the inner copper wire.
3
Cut off inner copper wire to
extend 3mm beyond plug body.

11
Router (For Internet)
Installation Instructions

1. Remove the supplied Pin located at the bottom of
the router.
Please note your Pin maybe located in the included
SIM Card Adaptor Pack instead.
Inserting Sim Card
12
3. Remove the SIM tray and lay the standard size SIM card flat with the metal chip face facing up. Ensure it is in
the correct orientation and sitting completely flat in the holder.
You can convert a Micro or Nano SIM Card to the standard size using the SIM Card Adaptor Kit included.
4. Insert the SIM tray back into the router. The metal
chip should still be facing upwards and the SIM text
on the front of the tray should be the correct way up.
The tray should push into the slot without resistance,
until it is fully inserted.
The SIM is now inserted.
✓ ✓✶✓✶
Nano
Micro
Standard
!
Slot
2. Use this pin to firmly press on SIM eject button.
This is located next to the SIM slot. It is not necessary
to apply force to the SIM tray itself. This may damage
the router.
✶

13
2. Attach the antenna coaxial cables to the top 2
connectors. These are marked ‘mobile’. Note the order
of the cables does not matter.
IMPORTANT - To prevent damage take
care to ensure the centre pins are
aligned before attaching the connector.
!
!
1. Position router bracket and mark hole positions.
Depending on material, drill a pilot hole or use a
bradawl. Mount the router mounting bracket to the
surface using the 2 x No.6 Screws provided.
Note: Make sure the ‘Maxview Logo’ is
horizontal and in the correct orientation.
Router Installation
!
Please Note:
When fitting the Signal Booster and Router, there should be as much distance between the
two units as possible. The TV Coax cable and Router SMA cables should also not be routed
next to each other wherever possible. This will reduce the potential for interference between
the two systems.
!
✗✓

4. Connect the 12V power lead or the 230V PSU
(available to order separately) and route the lead to
your power source.
5. Place the router into the mounting bracket.
The router can be removed from the bracket at any
time to change the SIM card as required.
6. The installation is now complete. You may
wish to tidy up cable routing to suit your installation.
14
The optimum positioning for the WiFi antennas on the
Roam Combo X Router is pointing directly upwards.
However, the unit can be fitted with the antenna at a
45° or 90° angle, or pointing downwards or forwards.
This may have a small detrimental effect on the
signal strength, which will become more significant
at greater distances from the router. However, for
leisure vehicle applications, this will likely only cause
a negligible drop in performance.
3. Attach the Wi-Fi antennas to the bottom
connectors. These are marked ‘Wi-FI’. These should be
positioned so they are vertical.

Getting
Connected
and Basic
Functions
Router (For Internet)
15

16
Front View Mobile signal strength
indication LEDs
Mobile network
type LEDs
Mobile MAIN
Antenna Connection
Power Socket
Wi-Fi Antenna
Connector
Blutooth Antenna
Connection
Power
LED
Wan Ethernet
Port
Get to know your Router
Credential Router Sticker (Located on the reverse of the router).
SERIAL: XXXXXXXXXXX
IMEI: XXXXXXXXXXX
LAN MAC: XXXXXXXXXXX
WIFI SSID: RUTXXXXXX
PASSWORD: XXXXXXXX
BATCH No. xxxx
QR CODE See page 18 for details.
Serial
Number
Password
Code
Wi-Fi
I.D
RUTX11 XXXXXXXX
SIM needle
WAN type LEDs
Reset
Button
LAN Ethernet
Ports
SIM
Holders
Wi-Fi Antenna
Connector
USB
Port
GNSS Attenna
Connector
Mobile AUX
Antenna Connection
Grounding
Screw
Back View

Getting Online
Now your Roam Combo X is installed and you have inserted the SIM card, it’s time to get connected. To do this,
you will need to be using a device which can connect to a Wi-Fi network such as a smart phone, Smart TV,
tablet or laptop.
1. Turn on router and allow 2 to 3 minutes for the router to boot.
When ready, the router name will be visible in your devices Wi-Fi settings.
There are 2 methods of connecting your device to the routers Wi-Fi network.
• Option A – Using device settings
• Option B – Using QR Code
Option A: Device Settings
1. Navigate to your devices Wi-Fi
settings and view available Wi-Fi
networks.
2. The Roam Combo X Combo
Router will be displayed as
RUTX11_XXXX. The last 4
characters will be unique to your
Roam Combo X Router.
If more than one Roam Combo X is
being used within close proximity,
the Wi-Fi network name is
displayed on the back of the
router.
See page 16 for code.
3. Once you select this network,
you must enter the password. This
is also printed on the back of the
router.
See page 16 for code.
4. You are now connected and can
begin using your Roam Combo X.
Note: Password is case
sensitive.
!
17
Note:
Two WiFi networks of the router are displayed. The 2.4GHz
network is designed for range the 5GHz network is designed for
data throughput.
!

Option B: QR Code
1. If your device is able to read QR codes (Android 9 or newer and IOS 11 or newer), simply point your device
camera at the QR code on the back on the router. When prompted, select ‘join’. Your device will automatically
connect to the Roam Combo X Router.
That’s it! You are now connected to the secure Wi-Fi hotspot of your Roam Combo X Router.
The Wi-Fi network name and password will remain the same as those listed on the back of the router.
The above processes can be repeated to connect up to 100 devices to the same network simultaneously.
!
18
Please note:
With the QR code on the back of the router, it is only possible to connect to the 2.4GHz network.
To connect to the 5GHz network, you must enter the WiFi password on the back of the router using the
keypad of your device.
!

19
Factory Reset
At any time, the Roam Combo X Router can be reset to its factory settings using the reset button on the side of
the router. This will restore all settings on the router, including:
• Router SSID (network name) and password to those listed on the back of the router.
• Web User Interface to the username and password listed on the front of the router.
• All custom settings will be deleted, including any Wi-Fi connections you may have added.
2. Hold for 6 seconds, until all of
the green LEDS on the side of the
router are on.
Once released all 5 signal strength
LED’s will flash together.
This indicates the start of the reset
process.
3. Allow 3 minutes for the router
to reset. Once reset the Wi-Fi
network will be visible and
available to connect to.
Connecting to a device using an Ethernet Cable
If your device does not support Wi-Fi or you would like to maximise the reliability of your connection, you can
access the Roam Combo X internet connection by connecting the Ethernet Cable between the LAN ports on the
router and your device. Possible applications for this include some Smart TV’s and desktop computers.
To do this, simply connect the Ethernet cable to the router and your device. If necessary, navigate to your
devices LAN settings and follow the prompts.
1. To complete the factory reset,
press and hold down the reset
button with the supplied pin
needle.
Note: If you don’t hold
long enough, the router
will restart but not reset.
!
When the ethernet is in use other devices can still connect to the router using Wi-Fi.
!

Advanced Functions
and Changing
Router Settings
Router (For Internet)
For most users changing these settings is not
necessary. We only recommend accessing and
changing settings in the Web User Interface if
necessary and we do not recommend
changing settings which have not been
outlined in this booklet.
Did you know?
The functions in this section
can be completed easier and
faster using the Roam Combo
X App.
See the Roam Combo X App
instruction manual for more
information.
20