Meade Zero Image-Shift Microfocuser User manual
Meade®
LX85, LX200/600/850, & II T
OR
Fig. 1: Microfocuser and eyepiece assembly. ( A) Rear cell of telescope (shown separate
from the telescope assembly for the sake of clarity); ( B) Microfocuser adapter;
(C) Microfocuser; ( D) 1.25" accessory adapter. ( L) SC accessory adapter may be used in
this position instead if Schmidt-Cassegrain accessories are being used. Do not use either
adapter if using a 2" diagonal diagonal mirror; ( E) Diagonal Prism holder thumbscrew;
(F) Eyepiece; ( G) 1.25 "Diagonal Prism. 2" diagonal mirror may also be used in this
position (12" models); ( H) Adapter thumbscrew; ( I) Microfocuser thumbscrews;
(J) Microfocuser bearings; ( K) Set screws.
Fig. 2a: Microfocuser groove.
Fig. 2b: Microfocuser 1.25" adapter
thumbscrew in groove.
Fig. 3a: SC adapter groove.
Fig. 3b: Line up SC adapter groove
with microfocuser thumbscrew.
groove.
Groove Line up
-
-
-
-
-
.
Fig. 4: Microfocuser and
1.25" diagonal prism with
eyepiece completely
assembled. Microfocuser
shown attached to a Meade
LX200 telescope.
Fig. 5: Microfocuser ball
bearings.
Fig. 6: Back o the adapter
ring one full revolution.
Fig. 7: Place the microfocuser
over the adapter ring. Notice
the orientation of the
microfocuser.
Fig. 8: Tighten the three
microfocuser set screws to a
rm feel.
12:00 position
Part no. 14-0204-10 REV 03
Mirror Lock
Manual Focus
-
-
-
-
-
Other Meade Accessories manuals
Meade
Meade 1244 User manual
Meade
Meade mySKY User manual
Meade
Meade LX-90 User manual
Meade
Meade LX85 Series User manual
Meade
Meade LXD 75 User manual
Meade
Meade Ultrawedge User manual
Meade
Meade Equatorial Wedge User manual
Meade
Meade 07002 User manual
Meade
Meade Zero Image-Shift User manual
Meade
Meade 608020 User manual
