Medel RONDO 2 User manual

RONDO
Single-Unit Audio Processor
Quick Guide
AW_. (English)

Table of Contents
The RONDO  Quick Guide is intended as an easy-to-use reference when handling your
audio processor. For detailed information on the intended use, indications, contraindications,
warnings and precautions of RONDO , or the complete information on the FineTuner and
other accessories, please refer to the RONDO  user manual.
Charging RONDO  ..............................
Switching On RONDO ............................
Changing the Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Changing the Magnet .............................
Attaching WaterWear ............................
Using Attachment Clips...........................
Connecting RONDO  ............................
Using the Mini Battery Pack .......................
Indicator Lights.................................
Link-Check Function .............................
FineTuner .....................................
Troubleshooting ................................
Basic Care and Maintenance .......................
Safety Features ................................

RONDO Single-Unit Audio Processor
Processing Unit
Indicator Lights
Cover
On/Off
Button
Microphone


RONDO 2
Charging RONDO
Plug the USB Cable into
the charging pad.
1Plug the other end into the wall
plug adapter, or the USB port of
your computer, TV, tablet etc.
2
Charging pad not manufactured by MED-EL.


Switch off RONDO  and place it in
the exact centre of the charging pad,
with the MED-EL logo facing upwards.
3The orange indicator light shows
that RONDO is charging.
When the light goes off,
RONDO is charged. This
should take around  hours.
4
Make sure RONDO  is placed
correctly onto the charging pad. The
MED-EL logo must be facing upwards.


RONDO 2
Switching On RONDO
Press the round button on the top
of RONDO to switch it on. If the
RONDO is already on, the amber
indicator light will blink to show it
is switched on.
1The blue indicator light will blink
to show which program is
activated. blink indicates
program  is selected, blinks
indicate program, and so on.
2
Amber
Indicator Light
Blue
Indicator Light
On/Off
Button


If the link-check function is
activated, the red indicator light
will blink. The green indicator light
will blink once RONDO is
correctly positioned on your head.
3RONDO should be placed over
your implant, with the MED-EL
logo against your head and the
microphone facing upwards.
4
Red/Green
Indicator Light
The link-check function is also
known as the link monitoring function.


RONDO 2
Changing the Cover
Insert your ngernail into the
groove above the socket,
between the processor and
the cover. Gently lift up to
remove the cover.
1Position the new cover over
the processor and push down
until it snaps into place.
2
Groove


There is a range of Design Covers available, to make RONDO blend
in or stand out as you wish. View all designs at medel.com/rondo
The cover should be changed every three months to maintain
best possible hearing with RONDO .

RONDO 2
Changing the Magnet
Place the magnet exchange
tool over the magnet, with the
arrow on the tool pointing to
the locked symbol .
1Turn the tool to point to the
unlocked symbol . Lift the
magnet out of RONDO .
2


Pick up the new magnet with
the tool, making sure the
arrow on the tool is over the
white bar on the magnet.
3Place the magnet into the
processor, with the arrow pointing
to the unlocked symbol .
4
Turn the tool to point to the
locked symbol .
5
MED-EL strongly recommends that you don’t change the magnet yourself. Contact
your clinician to have the magnet changed or if you experience any skin irritation.


RONDO 2
Attaching WaterWear
Insert it microphone
rst into the cover, so
that the ap at the top
of the cover lies smoothly
over the at side.
Take the ap at the
bottom and pull the
rest of the cover over
the processor.
3 4
Make sure the cover ts snugly around the processor,
without any wrinkles or air bubbles.
5
Check that WaterWear
and your hands are
clean and dry.
1Hold RONDO with the
MED-EL logo facing
upwards.
2


The adhesive strip
can only be used
once, but each
WaterWear cover can
be used up to three
times.
9
Place the round adhesive
strip over the at side of
the processor, starting at the
bottom. There should be no gaps
between the strip and the cover.
Check that the processor
is sealed on all sides by
WaterWear, and that
there are no wrinkles or
air bubbles.
To remove WaterWear,
gently peel off the
adhesive strip and
discard. Use the
circular ap to
remove the cover
from the processor.
6
7
8


RONDO 2
Using Attachment Clips
Remove the cover from
the audio processor.
1
Attachment Clips
There are two types of clip: the
Hair Attachment Clip and Clothes
Attachment Clip. Both are attached
to RONDO in the same way.


Push the circular end
of the leash into the
matching groove at the
bottom of the processor.
2
Replace the cover, securing
the cable in place.
3
Clip to hair or clothes as
appropriate.
4


RONDO 2
Connecting RONDO 
Sync your Bluetooth phone or
other device with your Bluetooth
neckloop, using the
manufacturer’s instructions.
1Place the neckloop around
your neck.
2


FineTuner Input
Selection Keys
Microphone
with Telecoil
Telecoil Only
Microphone Only
Press the MT or T button on
your FineTuner to start
streaming.
3Many public venues, such as
theatres or museums, have hearing
induction loops installed. To
connect to the loop, stand within
range of it and repeat step .
4


RONDO 2
Using the Mini Battery Pack (MBP)
RONDO
Connector
Slide off the battery compartment cover and insert
a AAA battery or DaCapo PowerPack into the MBP.
1
-Pin
Port Battery Compartment
for DaCapo PowerPack
or AAA Battery
On/Off Switch
and Battery
Compartment Lock


Pull gently on the rubber
socket cover at the bottom
of the processor to open
the MBP port.
2Plug in the MBP cable by
simultaneously pressing
the release levers.
3
For more connectivity options, a wireless receiver, such as the Roger™ X from
Phonak, can be plugged into the MBP’s -pin port. This makes it easy to connect to
phones and other devices using wireless microphones like the Roger Pen™. A direct
audio input cable can also be used with the MBP.


RONDO 2
Indicator Lights
Conrmation Status
FineTuner command has been successfully received.
Program Change
Program  is selected.
Program  is selected.
Program  is selected.
Program  is selected.
Status
If the optional status light has been activated,
RONDO is initialised and working.
If you continue to experience problems,
contact your CI centre.
