Medela Pump In Style Operating instructions

1. Help! My breast pump doesn’t power on / has no suction
Pump In Style®Troubleshooting
8x
Is your breast pump connected
to power?
1
Works with battery pack but not power
adaptor REPLACE YOUR POWER
ADAPTOR
4Doesn’t work with either power
source CONTACT MEDELA
CUSTOMER SERVICE
5
Try an alternate power source
- when testing, use new batteries
2Works with power adaptor but not
battery pack REPLACE YOUR
BATTERY PACK
3
1-800-435-8316
Medela wordmark and logo and Pump in Style are registered in the U.S. Patent and Trademark Office. 1549548A 0720 © 2020 Medela 4551357. Content appearance may vary from pictures

2. Help! My breast pump has no suction, low suction or suction only on one side!
Pump In Style®Troubleshooting
Check here
Check here
Check here
CLICK!
Turn your pump on.
1
While pumping, check to see there is
a complete seal around the breast
with the breast shields. Make sure
you are using the correct size, visit
medelabreastshields.com
for sizing information.
5
Increase (+) vacuum to
make sure it is not set too
low for you to feel.
2
While pumping, check that the end of
the tubing is plugged into the tubing
port on the top of the pump.
6
Check that all kit components are
clean and dry with secure connections.
- Breast shield to connector
- Tubing to connector
- Bottle to connector
3
If single pumping, insert the unused
tubing end into the tubing holder.
7
Open the connector
- Ensure the membrane placement is correct
- Close the connector & ensure the
connector cap is tightly shut.
4
If suction does not improve contact
Medela Customer Service.
8
1-800-435-8316
Medela wordmark and logo and Pump in Style are registered in the U.S. Patent and Trademark Office. 1549548A 0720 © 2020 Medela 4551357. Content appearance may vary from pictures